Do you mark your brass?

[stilly]

LoL.

I dunno if we really need to reinvent the wheel. Yeah it is cute and all but just running a sharpie across the row in an mtm ammo holder is pretty fast too... I suppose it has its uses.

[GeoffLinder]

fingernail polish -- your choice of color -

Bad idea, this will put a layer of stuff on the case which flakes off, IN the gun and IN the magazine. Swarf in either the gun or magazine is a recipe for malfunctions.

[Don the savage]

I mark my rifle brass with a large sharpie because some ranges get bitter when you pick up brass(angeles) and tell you to only pick up your own brass.

[M27]

The only time I mark my cases are when I am doing test loads. I will write the charge weight and sometimes what powder on the side of the brass.

[___M|9||___]

i use red, black, blue and green, right around the primer and case. Not all the time but only when i need to.

[CEDaytonaRydr]

I mark my brass if I modify it. So, if I cut a 41 Mag case with a split neck down to 41 Special length, I paint the back black, with a sharpie. I also do this when I cut down 9mm Luger brass for Makarov. I always seem to lose a couple when I go to a public range, and I want the next loader to know it's been cut.