Unconfigured Ad Widget

Collapse

Lube Shortcut

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #31
    supersonic
    Calguns Addict
    • May 2007
    • 5885

    Originally posted by GeoffLinder
    Hornady One-Shot is well known to produce stuck cases in small base rifle dies. Dillon spray lube is well known to NOT do so, end of story here
    I guess my 50 BMG brass didn't get that memo. Running BMG cases through a DTC sizing die is about as serious as it gets, force-wise, and One Shot out-performs them all. At least in my garage.

    *FACTORY-CERTIFIED ARMORER AT YOUR SERVICE IN SACRAMENTO, ALSO AR-15 WORK/ YUGO M59/66 SKS NIGHT SIGHTS REPLACEMENT - 916-516-7380*

    Comment

    • #32
      mnguyen84
      Senior Member
      • May 2010
      • 1132

      Originally posted by LGB Loader
      Go to the $1.00 store and get the cheap pam imatation.
      would that be under the kitchen...cooking isle?

      Comment

      • #33
        GeoffLinder
        Senior Member
        • Jul 2009
        • 2425

        Originally posted by supersonic
        I guess my 50 BMG brass didn't get that memo. Running BMG cases through a DTC sizing die is about as serious as it gets, force-wise, and One Shot out-performs them all. At least in my garage.
        Myself and everyone else I know who have had stuck cases using one shot in a SB die has had it happen with .223. Never heard of anyone getting stuck cases from one shot in any other caliber. Go figure

        Comment

        • #34
          tommyid1
          Senior Member
          • Feb 2008
          • 1634

          i use an rcbs lube die on station 1 in my 650 it decaps and lubes

          Comment

          Working...
          UA-8071174-1