9mm powder/primer?

[dandechino]

Loading 9mm for use in a GLOCK 19. My new press will be here tomorrow. Just curious to see what powder/primers you guys use?

[Gio]

4.3 gr of Titegroup and Wolf or CCI SPP with Montana Gold 124 JHP's

[G-forceJunkie]

4.4gr Win 231 over a plated 124gr. Shot 10's of thousands of them.

[shinbone]

I do 5.7gr of Power Pistol over a plated flat point 124gr. @ 1.075 OAL. and CCI primers.

[joelogic]

4grs of 700x and wolf spp.

[GeoffLinder]

Just over 4gr WW231 under a Remington Golden Sabre 124gr JHP. I always use WW SP primers. COAL 1.135" average, it's a JHP after all, LOL

Accurate load in all 3 of my neeners. Adjust powder charge to suit the pistol. Start at 4.1-4.2 and work it up to what you want in the way of snappiness.

[Enter_the_Dragon]

Powder: W231/HP38 4.5 - 4.6 gr
Bullet: Montana Gold 9mm 124grn CMJ
OAL: 1.110-1.115
Primer: Used CCI SP but prefer Winchester SP
Guns: G17 & G34

If you need any help send me a pm. I'm in your area. Good luck.

[pdq_wizzard]

Powder: W231/HP38 4.5 - 4.6 gr
Bullet: Montana Gold 9mm 124grn CMJ
OAL: 1.110-1.115
Primer: Used CCI SP but prefer Winchester SP
Guns: G17 & G34

If you need any help send me a pm. I'm in your area. Good luck.

How did you get my load data?

and for 124gr LRN I use 4.2gr of HP38 (this is in my PT-99 not a Glock)

[XDRoX]

CCI are my fovorite primers. WST is my favorite powder.

[Chivas]

3.6 Grains Universal Clays
147 Grain CMJ Montana Gold
OAL 1.125
Power Factor 130
Winchester SP

Very soft shooting!!!!!!!!!!!!!!!

[Bill Steele]

I bought some CCI's recently to do some hammer spring tests. I like them, but they are hard, so if you have a light hammer spring, you might want to borrow a few and test them before buying thousands. They work great on my light hammer springs.

I also tried some VV-3n37 on my 9mm's (6.2 Gr. 115gr Plated RN 1.142 OAL) and love it so much I just ordered 4 more Lbs from Powder Valley. The bad news is it is really pricey.

[amoril]

Titegroup, CCI & Berry's plated RN, I only just shot my first 50 reloads ever so I'm still experimenting with the loads...

[tANDa]

Titegroup, Winchester Primers, Berry's 115gr plated bullets.

Shot about 500 so far, and it is working well for me in my g19.

[wc12]

How much powder do you use? I'll be reloading the same bullet and primer.

Titegroup, Winchester Primers, Berry's 115gr plated bullets.

Shot about 500 so far, and it is working well for me in my g19.

[rockdogz]

115grn FMJ, 5 grains of unique with CCI 500s