Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Getting into precision reloading
Collapse
X
-
-
That is not what you said here:
Up until now you wanted to neck size. Now you want to full length size. You cannot do both using a FL die.Comment
-
Perhaps you mis-understood, or my sentence wasn't very clean. As you can see here sonnyt suggested simply neck sizing, and you suggested a die. My response was supposed to convey the fact that while some people only neck size, that since a neck sizing die wouldn't bump the shoulder back, I would prefer a FL die so that I could bump the shoulder back.
I might not be able to only neck size using a FL die, but I can neck size and bump the shoulder, sizing the case only the minimum necessary to ensure function, and screw it down further should I need to size all the way to the base for some reason.
Sorry about the confusion.Comment
-
Wouldn't be a bad idea to buy a Lee 223 collet neck sizing die along with your 223 F/L die. They run around $20.00 +/-, cheap enough to try one. Use your F/L 223 die to bump the shoulder back when you need to.
Here's an informative 2 pg. thread from Benchrest.com using the 223 Lee collet die.
Comment
Calguns.net Statistics
Collapse
Topics: 1,870,721
Posts: 25,175,185
Members: 358,862
Active Members: 5,389
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 19985 users online. 146 members and 19839 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment