What did you reload today?

[J-cat]

I have a few brands but most of it was Speer. Are you using CCI primers?

Yes, CCI. When I piced up the brass, I noticed the primer had backed out. I didn't think anything of it until I cleaned them and reprimed.

[g17owner]

about 200 rds of 185grn 45acp and 200 of 230 grn plated ball.

[sleepur606]

Didn't actually reload, but decapped somewhere around 2-3,000 rounds of .223 brass this weekend. On a single stage RCBS.

[joelogic]

I decapped and swaged 1000 pieces of .308 on a rock chucker when I first started and then I went out and bought a 650.

[killshot44]

160rds of 80.5gr Berger .223s...

[Timbob55]

20 rds of .480 Ruger. First batch of handloads. Can't wait to try them.

[Cowboy T]

100 rounds of .45 Colt "Magnum" loads. According to the chrono, these rounds are pushing a 250gr cast "boolit" at an average of 1,250 fps. Nighty-night, Bambi!

@Timbob55: congrats on your first handloads! If you're shooting .480 Ruger, then you really do need to handload. Welcome to the hobby! BTW, casting those big .475" slugs yourself will also save you a lot of dough, and it's not at all hard to do.

EDIT: Hey...this is post #308! Must be a good omen for the day! :-)

[XDRoX]

Yes, CCI. When I piced up the brass, I noticed the primer had backed out. I didn't think anything of it until I cleaned them and reprimed.

Strange. I haven't noticed anything like that. I didn't load them very hot though. I forgot what I loaded them with. I think 4.5gr of WST, under 230gr RN, I can look it up later.

I like the SPP 45's. I will be solely using them from now on. It's nice not having to change around the primer assembly on the press.

[Rem222]

20rd of 8X57...... Working on 20rds more....

[Triple R Munitions]

~8k of 223 55gr with surplus powder ....order is for 11k
~4 1/2k 9mm 115gr RN ran out of that projo and now onto 124gr!
~3 1/2k of 38spl 158gr
~just under 5k of 40sw 180gr
~3k of 45 ACP 230gr...had two primers go off cause of SP cases....i hate those things
300rds of 308 match 155gr AMAX
and started a batch of 50 DTC Brass rounds...

did this over the weekend.... and its already shipped out/picked up .....most of it anyways

[Rem222]

~8k of 223 55gr with surplus powder ....order is for 11k
~4 1/2k 9mm 115gr RN ran out of that projo and now onto 124gr!
~3 1/2k of 38spl 158gr
~just under 5k of 40sw 180gr
~3k of 45 ACP 230gr...had two primers go off cause of SP cases....i hate those things
300rds of 308 match 155gr AMAX
and started a batch of 50 DTC Brass rounds...

did this over the weekend.... and its already shipped out/picked up .....most of it anyways

You make me look like a slacker....

[Darklyte27]

my car with 11.621 gallons of reg unleaded at 2.959$ gal

[Triple R Munitions]

i wouldnt say slacker on your end....i would say that to my self.....with automated machines i should do better....but my guys were not ther this weeknd to help me out...finding good help nowaday is tough! especially ones that need to run reloading machines....

[tANDa]

Ordered my press (lct) and other accessories last night.
Hope to have my first loads done within a few weeks.

[aaronraby1]

i reloaded my paint tray with a new gallon of fresh paint. i also slapped on a new roller!! yeahh my living room looks crisp and new!