Unconfigured Ad Widget

Collapse

9MM reloading.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #31
    XDRoX
    Veteran Member
    • Mar 2009
    • 4420

    Originally posted by KenK
    Based on a Nosler reloading manual - showed a 90 gr jacketed bullet rated up to 5.4 grains at a maximum load and 4.4 grains at minimum. So logically to me a heavier bullet would require more powder, and estimated conservatively - or so I thought. This is all very new to me, guess Ive got more reading to do. What is a good resource you folks would recommend? Thanks for the input
    Actually heavier bullets require less powder.
    Chris
    <----Rimfire Addict


    Originally posted by Oceanbob
    Get a DILLON...

    Comment

    • #32
      pigman
      Senior Member
      • Jan 2010
      • 684

      my cost $80-$90 a case 1000 of my 9mm reloads and about 3-4 hours time loading / cleaning / refilling primers on my Lee progressive press 1000 model i think, fun to load ammo that cycles 100% and a mild load. fun stuff.

      Buy Bulk components and you will be fine bulk is the key only one caliber helps also.
      ACCOUNT CLOSED--

      ACCOUNT NO LONGER ACTIVE--

      ACCOUNT CLOSED ON CALGUNS--

      http://www.calguns.net/calgunforum/s...d.php?t=552157

      Comment

      • #33
        KenK
        Junior Member
        • Mar 2010
        • 44

        Originally posted by XDRoX
        Actually heavier bullets require less powder.
        I learned that tonight. I understand the concept now. Like I said, total newbie here.

        Comment

        • #34
          KenK
          Junior Member
          • Mar 2010
          • 44

          Originally posted by J-cat
          Too hot. Too hot.

          What is the projectile length? What is the cartrige length? I'll Quick Load it for you.
          Projectile: .617" 122gr

          Case: .744"

          Last edited by KenK; 03-09-2010, 2:12 PM.

          Comment

          • #35
            J-cat
            Calguns Addict
            • May 2005
            • 6626

            The cartrige length consists of the case and the bullet seated in it. I need the overall length to calculate the usable case capacity.

            Comment

            • #36
              Waldog
              Senior Member
              • May 2007
              • 528

              Comment

              • #37
                KenK
                Junior Member
                • Mar 2010
                • 44

                Originally posted by J-cat
                The cartrige length consists of the case and the bullet seated in it. I need the overall length to calculate the usable case capacity.
                Total cartrige length: 1.111"

                Comment

                • #38
                  KenK
                  Junior Member
                  • Mar 2010
                  • 44

                  Thanks for your help J-cat.

                  Comment

                  • #39
                    ChrisO
                    Veteran Member
                    • Apr 2007
                    • 4678

                    Hey guys I think I'm going to get lee dies for my 9mm since they seem cheaper and good quality. For my precision rifle I use redding dies. Do the lee carbine sets work with a single stage press or do I need a progressive loading set up?

                    Comment

                    • #40
                      pdq_wizzard
                      Veteran Member
                      • May 2008
                      • 3813

                      Originally posted by ChrisO
                      Hey guys I think I'm going to get lee dies for my 9mm since they seem cheaper and good quality. For my precision rifle I use redding dies. Do the lee carbine sets work with a single stage press or do I need a progressive loading set up?
                      they will work fine in a single stage press
                      Q: What was the most positive result of the "Cash for Clunkers" program?
                      A: It took 95% of the Obama bumper stickers off the road.

                      Originally posted by M. Sage
                      More what? More crazy?
                      You live in California. There's always more crazy. It's a renewable resource.

                      Comment

                      • #41
                        J-cat
                        Calguns Addict
                        • May 2005
                        • 6626

                        Originally posted by KenK
                        Total cartrige length: 1.111"
                        Your load, as you have it, generates 56824 PSI. You should reduce it to 3.6 grains and work-up to a max of 4.0 grains... to reduce the wear and tear on your gun.

                        Comment

                        • #42
                          KenK
                          Junior Member
                          • Mar 2010
                          • 44

                          Originally posted by J-cat
                          Your load, as you have it, generates 56824 PSI. You should reduce it to 3.6 grains and work-up to a max of 4.0 grains... to reduce the wear and tear on your gun.
                          Thanks, what resource did you use to figure those statistics?

                          Comment

                          • #43
                            J-cat
                            Calguns Addict
                            • May 2005
                            • 6626

                            QuickLoad software.

                            Comment

                            • #44
                              FieldsofFire
                              Senior Member
                              • Dec 2008
                              • 1879

                              AA #2 works fine for my 9mm loads.

                              For personal protection loads, I would buy LE-grade ammo rather than load your own handloads until you become much more proficient at reloading. Just personal preference.

                              Comment

                              • #45
                                Air
                                Senior Member
                                • May 2005
                                • 1640

                                I prefer Bullseye for 9mm, although I use Titegroup and Unique from time time. My favorite powder is generally whatever I have on hand.

                                Comment

                                Working...
                                UA-8071174-1