Unconfigured Ad Widget

Collapse

9MM reloading.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    XDRoX
    Veteran Member
    • Mar 2009
    • 4420

    Originally posted by ChrisO
    I'm not worried about only using RCBS dies I just thought RCBS dies were of good quality! What pistol dies do you guys recommend then? On lee dies I will have to change the shell holder correct?
    You won't have to change to shell holder if you switch die brands. They are all interchangeable.
    IMO, Redding makes the best dies, but unless you are shooting competition at 50 yards with a pistol, then the you don't need them.
    I use Lee carbide dies because they are the cheapest and work great.
    So I suggest Lee, if you already have RCBS they will work fine.
    Chris
    <----Rimfire Addict


    Originally posted by Oceanbob
    Get a DILLON...

    Comment

    • #17
      KenK
      Junior Member
      • Mar 2010
      • 44

      Anyone have a good recipe for a Browning High power using Bullseye powder and a lead projectile?

      Comment

      • #18
        LGB Loader
        Senior Member
        • Jun 2008
        • 727

        Any carbide die set will work, some just have their preferences. I like redding myself. If you can find it, N320 works great for light target rounds in 9mm, N330 is my main powder for 9mm, and 3N37 is great for full power loads in 9mm.

        Power pistol also works good.

        LGB
        Training in The Peaceful Art to achieve unnatural naturalness and natural unnaturalness, BEcoming WATER while serving The Great I AM.

        John 3:16

        Comment

        • #19
          KenK
          Junior Member
          • Mar 2010
          • 44

          Originally posted by KenK
          Anyone have a good recipe for a Browning High power using Bullseye powder and a lead projectile?
          Okay, total newbie here. Is there a formula used to safely load rounds for the 9mm? Ive got some cast lead projectiles weighing 122 grains and based on an estimate from a Nosler reloading manual I loaded 30 rounds at 5 grains w/ Bullseye powder. Logically this seemed like a modest load. I just dont like estimating. Any veteran loaders out there with good advice?

          Comment

          • #20
            gotsig
            Senior Member
            • Feb 2008
            • 568

            Originally posted by KenK
            Okay, total newbie here. Is there a formula used to safely load rounds for the 9mm? Ive got some cast lead projectiles weighing 122 grains and based on an estimate from a Nosler reloading manual I loaded 30 rounds at 5 grains w/ Bullseye powder. Logically this seemed like a modest load. I just dont like estimating. Any veteran loaders out there with good advice?
            I would pull those. My data is showing 4.2gr max for 120 gr cast.
            sigpic

            Comment

            • #21
              J-cat
              Calguns Addict
              • May 2005
              • 6626

              Too hot. Too hot.

              What is the projectile length? What is the cartrige length? I'll Quick Load it for you.

              Comment

              • #22
                Peter W Bush
                Calguns Supreme Overlord
                CGN Contributor - Lifetime
                • Jan 2009
                • 4727

                Ive been using 3.9gr 231 pushing a 124gr LRN for my 92FS and theyve been great target loads. You might not want to shoot lead in a factory glock barrel though.
                Last edited by Peter W Bush; 03-08-2010, 3:22 AM.
                Will trade liquor/wine/beer for parts and accesories and ammo! PM me. Dont drink n shoot. Offer void where prohibited. Must be 21 or older, etc. etc.

                Originally posted by TURBOELKY
                Well, glad you got the kit anyways, I'm sure I'll fondle it a little in the near future..... oh God, that's going to be in somebody's signature....:D
                Originally posted by TURBOELKY
                put me in line, but if Peter W. Bush takes it, I need to be removed from his Signature line.......:D

                Comment

                • #23
                  ChrisO
                  Veteran Member
                  • Apr 2007
                  • 4678

                  I'm also wondering how much some of you guys are saving reloading for 9mm? Is it worth it? Also looking for just some plinking rounds I can practice with a lot that will not defeat the purpose of me reloading (saving some cash) what and where to get?

                  Comment

                  • #24
                    Peter W Bush
                    Calguns Supreme Overlord
                    CGN Contributor - Lifetime
                    • Jan 2009
                    • 4727

                    Originally posted by KenK
                    Okay, total newbie here. Is there a formula used to safely load rounds for the 9mm? Ive got some cast lead projectiles weighing 122 grains and based on an estimate from a Nosler reloading manual I loaded 30 rounds at 5 grains w/ Bullseye powder. Logically this seemed like a modest load. I just dont like estimating. Any veteran loaders out there with good advice?
                    4.8 grains is a MAXIMUM load. Dont put those cartridges in your gun. Start at 3.6gr and work up. Just out of curiosity, how did you come up with that estimate?
                    Will trade liquor/wine/beer for parts and accesories and ammo! PM me. Dont drink n shoot. Offer void where prohibited. Must be 21 or older, etc. etc.

                    Originally posted by TURBOELKY
                    Well, glad you got the kit anyways, I'm sure I'll fondle it a little in the near future..... oh God, that's going to be in somebody's signature....:D
                    Originally posted by TURBOELKY
                    put me in line, but if Peter W. Bush takes it, I need to be removed from his Signature line.......:D

                    Comment

                    • #25
                      KenK
                      Junior Member
                      • Mar 2010
                      • 44

                      Originally posted by Peter W Bush
                      4.8 grains is a MAXIMUM load. Dont put those cartridges in your gun. Start at 3.6gr and work up. Just out of curiosity, how did you come up with that estimate?
                      Based on a Nosler reloading manual - showed a 90 gr jacketed bullet rated up to 5.4 grains at a maximum load and 4.4 grains at minimum. So logically to me a heavier bullet would require more powder, and estimated conservatively - or so I thought. This is all very new to me, guess Ive got more reading to do. What is a good resource you folks would recommend? Thanks for the input

                      Comment

                      • #26
                        J-cat
                        Calguns Addict
                        • May 2005
                        • 6626

                        Originally posted by KenK
                        Based on a Nosler reloading manual - showed a 90 gr jacketed bullet rated up to 5.4 grains at a maximum load and 4.4 grains at minimum. So logically to me a heavier bullet would require more powder, and estimated conservatively - or so I thought. This is all very new to me, guess Ive got more reading to do. What is a good resource you folks would recommend? Thanks for the input
                        Based on your Nosler reloading manual, what was the maximum charge for a 115gr. bullet? Why won't you give me the info I asked for?

                        Comment

                        • #27
                          pdq_wizzard
                          Veteran Member
                          • May 2008
                          • 3813

                          Please do more reading, ABC's is a good place to start. Also email the powder comp that makes the powder you are using and ask them "I have XX bullets and XXX powder what load data do you have"? I have never had one turn me down, they don't publish all there data.


                          Loadbooks USA has good info for the 9MM and cast bullets it is just a recipe book nothing more (this is not a replacement for a good Manual!!! And you should have at lest 3 good manuals)


                          and for the most part the heaver the bullet the lighter the powder load. but you should have been reloading for many years before you start coming up with what you think should be a load. (and even then I have heard of old timers messing up bad)

                          Originally posted by KenK
                          Based on a Nosler reloading manual - showed a 90 gr jacketed bullet rated up to 5.4 grains at a maximum load and 4.4 grains at minimum. So logically to me a heavier bullet would require more powder, and estimated conservatively - or so I thought. This is all very new to me, guess Ive got more reading to do. What is a good resource you folks would recommend? Thanks for the input
                          Q: What was the most positive result of the "Cash for Clunkers" program?
                          A: It took 95% of the Obama bumper stickers off the road.

                          Originally posted by M. Sage
                          More what? More crazy?
                          You live in California. There's always more crazy. It's a renewable resource.

                          Comment

                          • #28
                            pdq_wizzard
                            Veteran Member
                            • May 2008
                            • 3813

                            Originally posted by KenK
                            Okay, total newbie here. Is there a formula used to safely load rounds for the 9mm? Ive got some cast lead projectiles weighing 122 grains and based on an estimate from a Nosler reloading manual I loaded 30 rounds at 5 grains w/ Bullseye powder. Logically this seemed like a modest load. I just dont like estimating. Any veteran loaders out there with good advice?
                            See my post above, but as for the load

                            Start with 3.4gr of Bullseye this will get you ~939FPS to a Max of 4.2gr at 1175FPS

                            I try and keep my 9MM lead bullet loads below 1200FPS (above that and you start getting a lot of smoke, leading, and for pliking why would you want to waste powder?)
                            Q: What was the most positive result of the "Cash for Clunkers" program?
                            A: It took 95% of the Obama bumper stickers off the road.

                            Originally posted by M. Sage
                            More what? More crazy?
                            You live in California. There's always more crazy. It's a renewable resource.

                            Comment

                            • #29
                              KenK
                              Junior Member
                              • Mar 2010
                              • 44

                              Originally posted by J-cat
                              Based on your Nosler reloading manual, what was the maximum charge for a 115gr. bullet? Why won't you give me the info I asked for?


                              Easy there tiger, just havent gone out an measured. Ill get the info by the end of tonight. Didnt list Bullseye powder for the 115gr bullet. I had a family member explain the powder load theory to me regarding bullet weight.
                              You all are absolutely right, I do need more experience before I guess at a powder load. Thank you all for the valuable imput.
                              Last edited by KenK; 03-09-2010, 2:10 PM.

                              Comment

                              • #30
                                KenK
                                Junior Member
                                • Mar 2010
                                • 44

                                Originally posted by ChrisO
                                I'm also wondering how much some of you guys are saving reloading for 9mm? Is it worth it? Also looking for just some plinking rounds I can practice with a lot that will not defeat the purpose of me reloading (saving some cash) what and where to get?
                                Well you may have a point, but I inherited all the reloading equipment, a ton of brass and bought the powder and primers, so far it really hasnt cost much. Im doing it for the experience. Eventually I will be shooting a lot of .45ACP and .223 as well. Thats where the savings will be in my case.

                                Comment

                                Working...
                                UA-8071174-1