RELOADING BENCH PICTURES

[Revoman]

Originally Posted by vortec_cruiser View Post
There's a lot of really nice benches and supplies posted here, but I'm not one who would brag on a public forum, including detailed pictures of what I have. I have noticed that most people will also do the same concerning their guns and ammo.

I challenge you to find my place from the photos that I supplied.

[BACKTOSHOOTING]

This is my effort

Just started loading last week and this is what i have so far, More is on the way, Set up is inside a Tuff Shed

[Javi]

Just started loading last week and this is what i have so far, More is on the way, Set up is inside a Tuff Shed

Very nice, clean setup, Backto. I'll have to thumb through more pages in this thread but do most people who reload sitting down? I ask because I decided I'm just going to make a small, rectangular or square reloading bench(basically a scaled down work bench) and am curious about the height.

[BACKTOSHOOTING]

Very nice, clean setup, Backto. I'll have to thumb through more pages in this thread but do most people who reload sitting down? I ask because I decided I'm just going to make a small, rectangular or square reloading bench(basically a scaled down work bench) and am curious about the height.

i'm on my feet all day doing landscape maint, so i want to sit down while reloading for hours at a time but if your not doing very much at a time id prolly stand up too, you can move around and look at things more easily

[drkphibr]

Originally Posted by vortec_cruiser View Post
There's a lot of really nice benches and supplies posted here, but I'm not one who would brag on a public forum, including detailed pictures of what I have. I have noticed that most people will also do the same concerning their guns and ammo.

I challenge you to find my place from the photos that I supplied.

I think the person concerned with posting pics and the bad guys using the info was probably meant for something like this:

http://technorati.com/technology/gadgets/article/why-iphone-photos-are-dangerous/

How many people have locations services turned on for their iPhones and then turn around and use their iPhone to snap pics they do post here? I know I use the phone for great close ups that my digital camera stumbles on. I've also disabled location services though.

[tangocharlie7]

Bench Pic









Guys,

My humble man cave. this bench is making .380, 9mm, .40 s&w, .45 cap & .308 at present moment.

I enjoy seeing other setups, always good for ideas.

thanks,

Tango

[blockfort]

[bruceflinch]

^ What's the attachment in the drill?

[blockfort]

It's a Lee three jaw chuck, universal shell holder. geat for non-super-critical work. I use it for deburring and neck polishing mostly.

[M1Hound]

Reloading Setup

(Be sure to tell your California ASSemblymembers in Sacramento to DO NOT pass SB249 - When it got to the Assembly a rider was added to the bill that makes it FAR, FAR worse than it started out to be!)

Here are a few pix of my new set up. It is a work in progress and I will post additional photos when it all done. Quite a learning curve. Mine is in the basement except the tumbler is used in my tool shed to as not to foul the air in the basement.

[hemiguy55]

Most burglars are cowards and idiots. Any burglar stupid enough to rob an individual who has guns may have a real bad day.

[Trapper]

[bandook]

It's a Lee three jaw chuck, universal shell holder. geat for non-super-critical work. I use it for deburring and neck polishing mostly.

Any way we can see a picture of the battery conversion doodad? Will allow me to use an old drill that won't hold a charge.

How many amps is the power supply to the drill?

[blockfort]

My DIY drill AC adapter from post 309



I used a power adapter from my old wireless router, the voltage is close and the amperage is close. the drill is a bit weaker than with the battery, but for turning brass it's ok, and I could find a better adapter if I cared.

The battery is 9.6v, i don't know how many amps. the netgear adapter is 12 volts at 1 amp. I think i may try to just use the battery charger to power the drill though.

[AirtechJr]

650 with "As it should be" options from Brian Enos

Added:
Hornady feeder
3/8" Stainless top of lower toolbox
Cabinet has ample room for all supplies and tools
Can take it anywhere to reload
Had to lower overall height to get thru doors
Very stable