Need some quickload help for a .260

[ar15barrels]

Very interesting.
That might be worth single stacking for...

[novaman64]

Supposedly with their mag box, you have to shave a splash off the bolt stop, and a little off the bottom of the reciever, but other than that its supposed to feed reliable, like OEM, just gives you the nice long OAL for the long sleek high BC bullets... And thats still double stacked 4 in the box capacity, stock follower.... My gun is at the smiths getting the box fitted and a custom made muzzle brake... Should have it back in a month... Sent a dummy round loaded to 2.952 and the smith is going to have a PTG reamer made to my specs and get it all setup. I have some H4350 and just picked up some RL17, I was gonna load up some rounds going up in .5 grain increments so when my baby gets back I can head straight to the range. But i wanted a place to start... Sounds like most guys on the hide wiht a similar setup are getting around 42 grains...


They make them for long actions too and that bumps the OAL up to 4.0"...

[novaman64]

Stock mag box vs Wyatts extended box...



Installed after the action was milled out...