Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
9mm brass process?
Collapse
X
-
Always looking for vintage Winchester and Marlin lever action rifles. Looking to sell? Know of one for sale? Drop me a line!
"Give a conservative a pile of bricks and you get a beautiful city. Give a leftist a city and you get a pile of bricks."Comment
-
Yup, wish I had one. The brass I shoot through an open bolt gets bulged.Roll size machines size the entire length of the brass, eliminating any bulge near the bottom. Here's a video YouTube LinkComment
-
What kind of roll sizer do you have? How much was it?I dry tumble, then reload on a progressive press so primer gets removed and new one in one step.
I sometimes remove primers, then wet tumble with stainless pins.
I have found that if I de-prime first and then dry tumble, I will get media stuck in the primer flash hole, rare but its happened, so I dry tumble with primers in, wet tumble with primers out.
I only roll size occasionally. I roll size all range pickups, so I will wait until I have a lot of range pickups to do roll size. No issues with my guns if I don't roll size but my son-in-laws HK compact will get misfeed's on bulged cases, so I roll size range pickups for his gun.
I decap before dry tumbling. Otherwise tumbling media gets in the flash holes and breaks my decapping pins. Not a problem after decapping because the media is easily pushed out from inside. As well, the primer pickets get cleaned a little by the tumbling.Comment
-
I have the manual roll sizer
I think I paid $4something 2 years ago shipped from Australia, I see they have a USA distributor now.
I don't use it often on my reloads, but run 100% of my range pickups through it, then normal reload process. It really helped get rid of misfeeds on my son-in-laws HK Compact, but never needed it on my guns they eat anything
sigpic
NRA Benefactor Member. CRPA MemberComment
-
I roll size my brass with a Case Pro after case cleaning to keep the roller plates clean. I wet tumble without pins and without decapping. I gave up primer pocket cleaning pistol cases a long time ago, not seeing the benefit for my application (action pistol).
Since I have a Dillon SDB with tool heads that have a fixed order of dies, I have to size and decap in the first station, followed by up stroke repriming and down stroke expanding, flaring and powder drop in #2, bullet seating in #3 and flare removal in the last station.
Occasionally I will go up to the expansion and flaring step and store the brass for future use.Comment
-
Pick up brass off the ground
Dry tumble
Reload
Shoot
I don't roll size 9mm because I don't have any guns that have had problems fitting the 9mm range brass I feed them.Randall Rausch
AR work: www.ar15barrels.com
Handguns: www.handgunbarrels.com
Bolt actions: www.700barrels.com
Foreign Semi Autos: www.akbarrels.com
Most work done while you wait on a scheduled shop visit.Comment
-
Randall Rausch
AR work: www.ar15barrels.com
Handguns: www.handgunbarrels.com
Bolt actions: www.700barrels.com
Foreign Semi Autos: www.akbarrels.com
Most work done while you wait on a scheduled shop visit.Comment
-
I was loading ammo last week. I loaded 600 rounds of 9mm, well actually 589. But I had 11 primers left in my Dillon, but no more clean brass.
What to do, what to do?
So I grabbed 11 pieces of uncleaned/unprocessed brass and loaded those too.
OH THE HUMANITY !!Comment
-
I have been reloading pistol ammo, in huge quantities, for over 30 years. I have never ever had a depriming pin break due to media in the flash hole. I use a mix of corncob and crushed walnut, and Lee pistol dies for calibers ranging from 25-20 to .44mag and .45acp. Probably way over 100 thousand rounds, never broke a pin. The pin always pushes any media out with the primer.What kind of roll sizer do you have? How much was it?
I decap before dry tumbling. Otherwise tumbling media gets in the flash holes and breaks my decapping pins. Not a problem after decapping because the media is easily pushed out from inside. As well, the primer pickets get cleaned a little by the tumbling.
I tumble, and then run them through the progressive press, sizing/depriming first. Never an issue, not once.Last edited by bigbossman; 01-12-2022, 10:07 AM.Always looking for vintage Winchester and Marlin lever action rifles. Looking to sell? Know of one for sale? Drop me a line!
"Give a conservative a pile of bricks and you get a beautiful city. Give a leftist a city and you get a pile of bricks."Comment
-
Maybe he is dry tumbling with steel pins or sand?
I also have been reloading for 25+ years and using walnut and corn cob media and have yet to break a pin from the media.
I have bent and then broken them on a berdan case that got into the press without me culling it.Randall Rausch
AR work: www.ar15barrels.com
Handguns: www.handgunbarrels.com
Bolt actions: www.700barrels.com
Foreign Semi Autos: www.akbarrels.com
Most work done while you wait on a scheduled shop visit.Comment
Calguns.net Statistics
Collapse
Topics: 1,870,988
Posts: 25,178,231
Members: 358,862
Active Members: 5,382
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 30140 users online. 117 members and 30023 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment