Can powder coated bullets be pushed to +3000fps?
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Using fire cases as bullet jackets.
Collapse
X
-
There are commercially made 700 grain lathe turned solid brass bullets for .50BMG. It's fine.Comment
-
slamfire1 noted;
Yes, Speer and Hornady were actually partners making bullets from 22 rf cases shortly after WWII. Before they went their separate ways in the 1950s.I think Speer started out taking 22lr jackets and making bullets
Fred Huntington, the RCBS founder did the same. His world famous RockChucker press. Was designed to swage 22rf cases into usable bullets for the purpose of [you guessed it] reloading ammo to hunt RockChucks with.
"necessity is the mother of invention"
Comment
-
"necessity is the mother of invention"
Amen to that!.
Things I have for sale.
https://www.calguns.net/calgunforum/....php?t=1646789
https://www.calguns.net/calgunforum/....php?t=1645958
https://www.calguns.net/calgunforum/....php?t=1645863
Legal disclaimer: Opinions are like buttholes. Everyone has one, including me.
Comment
-
The old Hollywood Press maker made a swaging die to make 50 bmg bullets from brass .308
For handguns I don’t see the need
For plinking with 50 BMG where you can spend $2/ per projectile, swaging makes more sense for plinkingRule 1- ALL GUNS ARE ALWAYS LOADED
Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs)
Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET
Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT
(thanks to Jeff Cooper)Comment
-
I can often find .50 cal plinking bullets for .50 to .75 a piece. Some match bullets are close to $5 each. Most, if not all, good "match" bullets are over $2 a piece.NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
California DOJ Certified Fingerprint Roller
Ventura County approved CCW Instructor
Utah CCW Instructor
Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.
sigpic CCW SAFE MEMBERSHIPS HERE
KM6WLVComment
-
Not sure. I do know that cast lead bullets are OK up to 2500 fps when A.) the hardness is correct, B.) there's proper lube, and C.) they're sized properly for that barrel. But I don't know of anyone yet who's tried it at 3000 fps.
But that's why I think it may be worth it to use .22LR shells for bullet swaging."San Francisco Liberal With A Gun"
F***ing with people's heads, one gun show at a time. Hallelujah!
http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
http://www.liberalsguncorner.com (podcast)
http://www.youtube.com/sfliberal (YouTube channel)
----------------------------------------------------
To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.Comment
-
Somewhere I saw the 40 in 44mag that worked. It was turned around so the primed end was in the 44mag brass and had a 40 lead slug pressed in and crimped before going into the 44mag brass.Originally posted by NOMADCHRISyour asking a question about asking a question ??? just ask the damn question!!!Comment
-
^^ Yep, and you can do essentially the same thing with 9mm cases in a .40."San Francisco Liberal With A Gun"
F***ing with people's heads, one gun show at a time. Hallelujah!
http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
http://www.liberalsguncorner.com (podcast)
http://www.youtube.com/sfliberal (YouTube channel)
----------------------------------------------------
To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.Comment
-
.
Things I have for sale.
https://www.calguns.net/calgunforum/....php?t=1646789
https://www.calguns.net/calgunforum/....php?t=1645958
https://www.calguns.net/calgunforum/....php?t=1645863
Legal disclaimer: Opinions are like buttholes. Everyone has one, including me.
Comment
-
.
Things I have for sale.
https://www.calguns.net/calgunforum/....php?t=1646789
https://www.calguns.net/calgunforum/....php?t=1645958
https://www.calguns.net/calgunforum/....php?t=1645863
Legal disclaimer: Opinions are like buttholes. Everyone has one, including me.
Comment
-
You MIGHT want to head over to CASTBOOLITS and look for a guy named BT Sniper.I have been reading about this and watching videos on youtube and find this very intriguing. When time are good and bullets just flow out of the tap for mere pennies, this seems like a lot of work. But when you don't want to touch what you have stored for fear of no replacement, it may not be a bad way to load ammo. I know that you can use 9mm for a .40 cal bullet. A .40 cal for .45 acp and so on. It is something I might try. The one thing that I am concerned about is what it will do to your barrel. I tried to look up whether brass was harder that copper online but all the answer I see are from a used car salesman. It is a non-answer answer.
I understand that if I anneal the brass, it will make it softer. Does anyone know the temperature that is needed. I have mucho brass and mucho mucho lead. So this might be a fun project. I will post a .40 cal case slid into a .44 mag case for reference.
He is a DIE GOD and has made many dies to turn cases into projectiles, primer and all and was a pretty cool guy to do business with.7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...
Need GOOD SS pins to clean your brass? Try the new and improved model...

And remember- 99.9% of the lawyers ruin it for the other .1%...Comment
-
.
Things I have for sale.
https://www.calguns.net/calgunforum/....php?t=1646789
https://www.calguns.net/calgunforum/....php?t=1645958
https://www.calguns.net/calgunforum/....php?t=1645863
Legal disclaimer: Opinions are like buttholes. Everyone has one, including me.
Comment
Calguns.net Statistics
Collapse
Topics: 1,870,971
Posts: 25,178,131
Members: 358,862
Active Members: 5,382
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 34600 users online. 19 members and 34581 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment