Unconfigured Ad Widget

Collapse

Help Please. Case Head Separation.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    ar15barrels
    I need a LIFE!!
    • Jan 2006
    • 57199

    Originally posted by JagerDog
    Pressure doesn't cause case head separation.
    I got nothing else.
    Excessive headspace causes case head separations.
    Randall Rausch

    AR work: www.ar15barrels.com
    Handguns: www.handgunbarrels.com
    Bolt actions: www.700barrels.com
    Foreign Semi Autos: www.akbarrels.com
    Most work done while you wait on a scheduled shop visit.

    Comment

    • #17
      ar15barrels
      I need a LIFE!!
      • Jan 2006
      • 57199

      Originally posted by Rusty Scabbard
      Because an out of battery touch off would really suck !
      Always full length resize for autoloaders.
      It's not possible for the hammer to strike the firing pin with full force in an AR design unless the bolt is fully locked.
      The carrier prevents the hammer from fully reaching the firing pin until the carrier is fully forward against the barrel extension.
      Randall Rausch

      AR work: www.ar15barrels.com
      Handguns: www.handgunbarrels.com
      Bolt actions: www.700barrels.com
      Foreign Semi Autos: www.akbarrels.com
      Most work done while you wait on a scheduled shop visit.

      Comment

      • #18
        pacrat
        I need a LIFE!!
        • May 2014
        • 10287

        You simply may be the latest victim of MURPHY'S LAW.

        Sometimes "Chit Happens".

        I had a case head separation with brand new shiny fresh out of the box factory ammo.

        In your pic, it appears as if the case is extremely thin at the separation point, which is considerably higher than normal over sizing caused separations.

        Likely cause.................bad case,............ simple as that.

        Likely Mr Murphy just decided it was your turn.

        Comment

        • #19
          smoothy8500
          Veteran Member
          • Sep 2009
          • 3846

          Originally posted by bigdawg86
          Oversizing may be possible...
          Now that you are giving us more details, this may be the situation.

          Comment

          • #20
            JagerDog
            I need a LIFE!!
            • May 2011
            • 15870

            Originally posted by bigdawg86
            Oversizing may be possible...
            I'm betting 1 too many tensions. Classic tensions failure.
            Palestine is a fake country

            No Mas Hamas



            #Blackolivesmatter

            Comment

            • #21
              bigdawg86
              Veteran Member
              • Mar 2012
              • 3554

              Well turns out this is my own fault... I suspect I set up my whidden die the same as I would an RCBS... Which means I grossly oversized. Photo left is the oversized round, photo right is a factory round. Well looks like I get to pull these rounds and trash the brass as there is no way I will likely be able to fire form these to usable cases. I'm ticked, live and learn.

              Sent from my SM-G950U using Tapatalk

              Comment

              • #22
                tawadc95
                Senior Member
                • Apr 2017
                • 565

                Nothing to be upset over, it will make you a better reloader with another piece of knowledge now added.

                Comment

                • #23
                  RestrictedColt
                  Senior Member
                  • Feb 2017
                  • 773

                  Originally posted by Rusty Scabbard
                  Because an out of battery touch off would really suck !
                  Always full length resize for autoloaders.
                  Fortunately most won't allow an out of battery ignition.

                  Comment

                  • #24
                    RestrictedColt
                    Senior Member
                    • Feb 2017
                    • 773

                    Originally posted by ar15barrels
                    It's not possible for the hammer to strike the firing pin with full force in an AR design unless the bolt is fully locked.
                    The carrier prevents the hammer from fully reaching the firing pin until the carrier is fully forward against the barrel extension.
                    And the firing pin won't protrude from the face of the bolt until it rotates. I'd never considered the hammer strike, I was satisfied when I saw that the pin can't ignite the primer 'till the bolt rotates most of the way.

                    Comment

                    • #25
                      tawadc95
                      Senior Member
                      • Apr 2017
                      • 565

                      Just out of curiosity what do your calipers say about how far the head is down below the case gauge rim?

                      Comment

                      • #26
                        bigdawg86
                        Veteran Member
                        • Mar 2012
                        • 3554

                        Originally posted by tawadc95
                        Just out of curiosity what do your calipers say about how far the head is down below the case gauge rim?
                        Unfortunately my calipers won't read a inside measurement like that.... But we may be in hundredths

                        Sent from my SM-G950U using Tapatalk

                        Comment

                        • #27
                          JagerDog
                          I need a LIFE!!
                          • May 2011
                          • 15870

                          Originally posted by tawadc95
                          Just out of curiosity what do your calipers say about how far the head is down below the case gauge rim?
                          Originally posted by bigdawg86
                          Unfortunately my calipers won't read a inside measurement like that.... But we may be in hundredths

                          Sent from my SM-G950U using Tapatalk
                          Looks like maybe 0.040.

                          No depth rod on (rear of) caliper?

                          You could add most anything as a spacer, measure combined overall, then subtract.
                          Last edited by JagerDog; 03-12-2019, 12:08 AM.
                          Palestine is a fake country

                          No Mas Hamas



                          #Blackolivesmatter

                          Comment

                          • #28
                            ar15barrels
                            I need a LIFE!!
                            • Jan 2006
                            • 57199

                            Originally posted by JagerDog
                            Looks like maybe 0.040.

                            No depth rod on (rear of) caliper?

                            You could add most anything as a spacer, measure combined overall, then subtract.
                            You totally just put up a Guffey signal...
                            Randall Rausch

                            AR work: www.ar15barrels.com
                            Handguns: www.handgunbarrels.com
                            Bolt actions: www.700barrels.com
                            Foreign Semi Autos: www.akbarrels.com
                            Most work done while you wait on a scheduled shop visit.

                            Comment

                            • #29
                              pacrat
                              I need a LIFE!!
                              • May 2014
                              • 10287

                              Originally posted by ar15barrels
                              You totally just put up a Guffey signal...

                              OH CRAP! Now we'll have a dozen posts on how nobody can accurately "tension a datum".

                              Comment

                              • #30
                                ar15barrels
                                I need a LIFE!!
                                • Jan 2006
                                • 57199

                                Originally posted by bigdawg86
                                Unfortunately my calipers won't read a inside measurement like that....
                                No depth rod?
                                Really?

                                Randall Rausch

                                AR work: www.ar15barrels.com
                                Handguns: www.handgunbarrels.com
                                Bolt actions: www.700barrels.com
                                Foreign Semi Autos: www.akbarrels.com
                                Most work done while you wait on a scheduled shop visit.

                                Comment

                                Working...
                                UA-8071174-1