Unconfigured Ad Widget

Collapse

A Pig Load

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    roostersgt
    Senior Member
    • Dec 2012
    • 1921

    Originally posted by Fjold
    I've used Barnes bullets for about 90% of my hunting in the last 10-15 years and I've only seen one animal go more than about 30 feet when hit with one correctly. That was the buffalo in my avatar and even with holes in both lungs, he just didn't want to die.

    Except for one or two, every other animal (approximately 40 - 50) that I've shot with Barnes bullets have died within 30 feet or so from where they were hit. A few of the ones that did make any distance were shot while running and momentum carried them further. But, except for my buffalo, I've never seen one make 200 yards.

    I'm going to Africa at the end of the month for ten, deer to elk sized animals and some small game and all I'm bringing is Barnes bullets as is my hunting partner.
    This is the same thing everyone says, except for those 10-12 I have hunted with, and have had to help track and drag their animals over the past 10 years. Cant' say all were shoulder shots, but every one of them was at least in the boiler room. Your animal count is about the same as most of the guys I hunt with, mine is just slightly less. The distinction is that none of those who used the coppers in Wyoming will use them again. A dozen long tracks kind of taints things a bit.

    Good friend hunts Africa every couple of years, mostly plains game, and he prefers Accubonds over the Barnes in his 300 Winn. His experiences are similar to what I've seen. They didn't open consistently for him either, even in his magnum. This person is a former Marine Force Recon Sniper (legit) and has taught rifle and pistol at my department for 25+ years. He can shoot.

    Not saying anyone is wrong here, just giving my observations after seeing a dozen or so animals shot well, that didn't die anywhere near within 200 yards of being shot. I've never had to track an animal more than 30 yards using budget to bonded premiums. Coppers, a whole different problem for me/us. Again , YMMV. This isn't a challenge or an argument, just my opinion. I'll not use them outside of Cali, and then only for pigs.


    Good luck with the hunt. Wish I had near the confidence you have with them.
    I won't use anything except Accubonds or Partitions anymore.
    Last edited by roostersgt; 04-10-2019, 1:37 AM.

    Comment

    • #17
      Fjold
      I need a LIFE!!
      • Oct 2005
      • 23094

      Interesting that you mention Wyoming, I've taken a dozen or more antelope in the last 10 years in Wyoming, only one animal made more than one step with the 270 Win, 6.5x284, 7mm Mag and 243 and all but one of those were taken with Barnes bullets.
      Frank

      One rifle, one planet, Holland's 375




      Life Member NRA, CRPA and SAF

      Comment

      • #18
        tsmithson
        Senior Member
        • Jan 2016
        • 1580

        In CA copper is becoming the only game in town.
        Pig load in CA = hog wash.
        I think the answer for me is a larger caliber 338 to compensate for the lighter copper.

        Comment

        • #19
          roostersgt
          Senior Member
          • Dec 2012
          • 1921

          That, or you could keep shooting them. I've killed 30+ animals and scouted/helped take another couple dozen with others doing the actual shooting. As I stated, I have many friends and coworkers who swear by Barnes. In all my years of hunting deer and antelope, the only ones I've seen drop, or take one step, were those hit high in their back/spine, blowing up the back strap and/or loins. That's not where one wants to shoot them. LOL

          Not calling BS on you FJOLD, what you've stated is like many Barnes users have told me over the years. It always seems that online, or at the office, everyone always gets one shot DRT and their guns are always sub MOA, at least until they get into the field, or at the range, then **** changes for some reason. That's sure been my experience.

          Comment

          • #20
            Divernhunter
            Calguns Addict
            • May 2010
            • 8753

            Fjold---A bit off subject. I am headed to Texas for Oryx and Mouflon sheep in May. I plan to use my 6.5X300W. I have loads for 140gr Swift A-Frames, 130gr Siroccos and 127gr Barnes LRX bullets that all are good groups. I was leaning toward the 130gr or the 127gr bullets. Your thoughts? Usually I do not have a problem in deciding which bullet but for some reason I am not sure this time. I know that anyone of them would work but?????
            A 30cal will reach out and touch them. A 50cal will kick their butt.
            NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
            SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

            Comment

            • #21
              roostersgt
              Senior Member
              • Dec 2012
              • 1921

              A Frames are superb, just a bit spendy. No opinion on Sirocco I, or IIs, as nobody I know has used them. Only know the A Frames work because one in our group only uses Swift bullets. They're constructed similarly to the Partition, but twice the price. 6.5x300w the new Weatherby magnum? Will you be hunting the Ox Ranch? Uvaldi Tx?

              Sorry DIVRNHUNTR, didn't notice it was asked of FJOLD.
              Last edited by roostersgt; 04-10-2019, 4:02 PM.

              Comment

              • #22
                Divernhunter
                Calguns Addict
                • May 2010
                • 8753

                I have used all 3 bullets(and others). The A-Frames are a bonded copper jacket partition. They are like a Nosler PAR on steroids. Yes they cost more. However the bullet is the cheapest cost of any hunt and the only part that actually touches the live animal and determines the outcome of the hunt. I have used them, and my daughter, on 2 trips to Africa and shot about 100 animals. One shot kills. No DG only PG hunting. We have used them here as well as the other 2 bullets.
                The 6.5X300W is their new one and it is fast.
                No I will be hunting with another outfit near Sonora Texas.
                A 30cal will reach out and touch them. A 50cal will kick their butt.
                NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
                SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

                Comment

                • #23
                  NapalmCheese
                  Calguns Addict
                  • Feb 2011
                  • 5965

                  roostersgt: I switched from shooting 140 grain ballistic tips @2700fps in a 7mm-08 to a 110 grain TTSX @3200fps in 7mm-08 for Wyoming deer and antelope 2 years ago. I've not shot a pig with one yet, but here's my experience on Wyoming deer.

                  Of the 4 animals I've shot with the TTSX (all deer, 3 white tail and 1 mule deer) two went down like they were hit by Thor's hammer, and two of them walked off a way.

                  The first deer I shot was 180 yards, quartering away. Shot entered in the last rib, just through the liver, went through both lungs, and I recovered the bullet in the hide on the offiside shoulder (broke the scapula). That bullet was missing a petal.

                  The second deer was shot at exactly 200 yards slightly downhill. The shot entered just behind the scapula and just under the backstrap, went through both lungs and out the offside. That deer just tipped over, hooves still in the hoof prints. Just tipped over to the right.

                  Third deer took a shot through both shoulders forward of where I normally shoot at 140 yards or so. That one just crumpled straight down.

                  Fourth deer, I shot while it was laying down maybe 60 yards away in the rear of the lungs. Souped up the back half of the lungs with enough hydrostatic shock to blow up the liver and detach the top of the diaphragm. It got up, started running to the side and I put another shot in it in the middle of the lungs. It kept running so I put a third shot into it, that one went through the bottom of the chest and humerus; crippling it in place while it died a couple of seconds later. I recovered that bullet in the dirt a bit behind where the dear laid down, it's just the bullet shank.

                  It seems that if you don't get a front lung shot, possibly (probably) through both shoulders, you'll end up tracking your critter. With the NBTs I was using before, a shot anywhere between the diaphragm and the shoulder put deer and antelope down within 30 yards.

                  So on the one hand, I think there's a better probability of more immediately killing your game with cup and core bullets (I have a theory on this - fragmenting lead bits going through stretched soft tissue create more permanent wounding than either bits going through non-stretched tissue or stretched tissue with no bits going through it). On the other hand, the copper bullets do a good job of minimizing bruising and bloodshot meat and punch up the penetration of whatever rifle you're using and also eliminates lead contamination in whatever bits I (or my dog) might eat (I make dog treats out of a lot of the offal).

                  I might go back to back to lead for Wyoming, but it's nice knowing I have an effective killing non-lead round for hunting in CA. Just have to remember to shoot a little further forward than I'm used to.
                  Calguns.net, where everyone responding to your post is a Navy Force Delta Recon 6 Sniperator.

                  Comment

                  • #24
                    rm1911
                    Veteran Member
                    • Jan 2013
                    • 4073



                    150gr nosler e-tip. 48gr IMR4895.

                    The pig got a lot more than just the tip . Hit him in the shoulder at 150 yds. Dropped one step from where I hit him.


                    Sent from my iPad using Tapatalk
                    NRA Life Member since 1990

                    They're not liberals, they're leftists. Please don't use the former for the latter. Liberals are Locke, Jefferson, Burke, Hayek. Leftists are progressives, Prussian state-socialists, fascists. Liberals stand against the state and unequivocally support liberty. Leftists support state tyranny.

                    Comment

                    • #25
                      roostersgt
                      Senior Member
                      • Dec 2012
                      • 1921

                      Again, not surprised to hear guys have had great results with them. The copper bullets have a huge following. I have lots of them on my bench, E-Tips, GMX and TTSX in two calibers, 270/308. As a hand loader and hunter myself, I'm aware bullets are the cheapest part of any hunt. Not convinced the Swifts are worth twice the price of an Accubond, or Partition though. They might be a bit tougher, but I haven't noticed any need for a bullet tougher than the Nosler stuff. YMMV. Glad to hear you actually recovered a TTSX. That hasn't happened on any of the animals I've seen. Usually just pencil holes on both sides, and a mess of jelly between the holes. Not much blood trail and the "hydrostatic shock" didn't slow any of them down and some hardly flinched when shot.

                      Used Hornady SSTS one year as people swear by them. Made a real mess out of both shoulders at ~120 yards, but didn't exit. Deer still was able to run about 30 yards before bleeding out. A trail Ray Charles could have followed. 1/4 of that deer was wasted. Probably a better bullet for white tails from a stand and up close. Where one could blow their boiler room to hell and not worry about them going anywhere.

                      On paper I get decent groups with all but the TTSX. Have loaded 130s in both calibers and get just under 2700fps out of my '06s and .308s, around 2950fps out of the 270s. Use Varget, 40895, 4064 and RL-15 in the 30's and h4350, 4350, 4831sc in the 270 loads. Have to add that I get much tighter groups with every standard and bonded bullets. Accubonds seem to be the most accurate in my rifles, in both calibers.

                      Hope you do well on your hunt. Post up pictures when you get back.
                      Last edited by roostersgt; 04-10-2019, 8:33 PM.

                      Comment

                      • #26
                        MongooseV8
                        Veteran Member
                        • Apr 2010
                        • 4426

                        If the Barnes dont have enough velocity when they hit, you wont get good expansion. Most of their bullets need at least (iirc) 2100 fps to reliably expand. The Barnes Ive seen hit animals make that lovely "THWACK" noise if all it right.

                        Comment

                        • #27
                          roostersgt
                          Senior Member
                          • Dec 2012
                          • 1921

                          Thinking the Barnes, and all coppers, require magnum speeds to get good expansion. I'm not likely to ever get that in a 30-06/.308, even if I go with a ridiculously light for caliber bullet. Bolt lift gets sticky pushing 130s to 2700 in most of my 30 calibers.


                          RM1911, what caliber rifle and did you recover a bullet?

                          Comment

                          • #28
                            igorts
                            Senior Member
                            • Jan 2007
                            • 1562

                            A Pig Load

                            i use Barnes in my hunting loads for Tikka T3 in 30-06.
                            180 TSX, TTSX, and now 175 grn LRX.
                            never needed to look for an animal or second shot, really.
                            LRX with superformance powder:



                            Sent from my iPhone using Tapatalk
                            Lifetime NRA Member

                            Comment

                            • #29
                              Fjold
                              I need a LIFE!!
                              • Oct 2005
                              • 23094

                              Originally posted by Divernhunter
                              Fjold---A bit off subject. I am headed to Texas for Oryx and Mouflon sheep in May. I plan to use my 6.5X300W. I have loads for 140gr Swift A-Frames, 130gr Siroccos and 127gr Barnes LRX bullets that all are good groups. I was leaning toward the 130gr or the 127gr bullets. Your thoughts? Usually I do not have a problem in deciding which bullet but for some reason I am not sure this time. I know that anyone of them would work but?????
                              That's a long range gun. What range are you planning to shoot them at?

                              Oryx/Gemsbok are tough guys, they're all muscle and notorious for soaking up bullets. I'd go with the heavier Swift A frames and really I would be a lot more comfortable with a bullet of 165 grains in .30 caliber for them but that's just my opinion.

                              I'm leaving in 9 days for Kudu, Gemsbok (oryx) and springbok in Namibia and I'm taking my 375 H&H with the 300 grain TSX while my hunting partner is taking a 300 Magnum with the 175 grain LRX.

                              As long as you can get an accurate shot at a calm animal the 130 - 140 grain bullets will work. I like to break bone so my point of aim is always on the shoulder/leg bone about 4" above the bottom of the chest.

                              On the last Gemsbok that I killed, I hit a branch with a 300 grain TSX that then deflected into his brisket at about 150 yards. He took off in high gear and I put another 300 grainer in his belly that exited in front of his off shoulder and somersaulted him. He got back up at a dead run and I put a third TSX under his armpit that took the top of his heart off and rolled him over again. He still tried to get up before he finally died. My first shot should have broken his shoulder which would have made the the next two shots unnecessary.
                              Frank

                              One rifle, one planet, Holland's 375




                              Life Member NRA, CRPA and SAF

                              Comment

                              • #30
                                Fjold
                                I need a LIFE!!
                                • Oct 2005
                                • 23094

                                Originally posted by MongooseV8
                                If the Barnes dont have enough velocity when they hit, you wont get good expansion. Most of their bullets need at least (iirc) 2100 fps to reliably expand. The Barnes Ive seen hit animals make that lovely "THWACK" noise if all it right.
                                Barnes says the minimum velocity for expansion for their bullets is 1800 fps

                                This one was recovered from my buffalo and should have impacted at about 2200 fps. it weighed 299.9 grains on my scale at home.
                                Frank

                                One rifle, one planet, Holland's 375




                                Life Member NRA, CRPA and SAF

                                Comment

                                Working...
                                UA-8071174-1