Unconfigured Ad Widget

Collapse

nOTHING hERE

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    ruggyh
    Member
    • Mar 2012
    • 203

    Originally posted by moyneur
    Have any favorites for 454 Ruggy?
    I don't shoot 454 or 45C out of my 460s

    Just load to the level you want in 460 case.
    That way you won't have to scub carbon or residue out of your cylinders before firing full length 460.

    With the powders you listed you have load levels from 45C to full 460 range covered.

    I did not mention Accurate 4100 or 5744 in previous post as I don't really load much mid range reduced loads, you may find these useful if do.

    One addition note on hand loading, as a best practice use fill rate above 70% and avoid fast high density powders when loading large volume cases.

    be safe
    Ruggy

    Comment

    • #17
      moyneur
      Member
      • Jan 2012
      • 263

      Thanks Ruggy, I'll keep you posted after I hit the range
      The difference between stupidity and genius is that genius has its limits
      ~~Albert Einstein~~

      Comment

      • #18
        For54
        Junior Member
        • Apr 2014
        • 67

        Note my posted experience with 460 mag handloading is only with 460v. Low pressure loads with 255gr cast bullets sized at .452 has been accurate. Iv had poor results with plated bullets at 45 colt velocities. Leading has been minimal if velocties kept in the 45 colt level.

        my opinion is that full pressure loads with h110 and light bullets produce tremendous blast out of the 5” compensated barrel. 300 grain and heavier bullet seem to tame blast in the 460v better but they have higher recoil. Iv tried one time benchresting full pressure loads with 460v and its a great challenge.

        I use rcbs dies with lee factory crimp die and try not to flare more than needed. Iv buckled a few cases while seating from not flaring enough. I take higher precautions reloading a 460 mag case at full pressure more than 4 times. While ita doable, you have to start watching for proper neck tension and primer pocket integrity. Then cylinder lockup with bullet creep and possible slam fire / misfire could become an issue.

        Another note is that i only single stage handload 460 magnum and carefully inspect my work at every stage. It may not be necessary to follow this method but its just what i do given the high pressures involved with this case.

        Keep us posted with range results, 460v is one of my favorites to handload for.

        Comment

        • #19
          moyneur
          Member
          • Jan 2012
          • 263

          Shot some sample loads yesterday
          240 JHP, 2.16 COAL, WLR primer;
          Enforcer - 45.7 gr - Have to say my favorite
          IMR4227 - 46.3 gr - pretty smooth good result
          H110 -47.6 gr - Have to I forgot how realy dirty H110
          Trail Boss - 16 gr - Like shooting a 38 +p
          The difference between stupidity and genius is that genius has its limits
          ~~Albert Einstein~~

          Comment

          • #20
            ORNGXTC
            Member
            • Jun 2009
            • 130

            Great thread. Lots of info. I have wanted to use my 460 for taking a pig recently. How are we with lead free ammo and the 460 for Ca these days. Yes you can say I am a little out of touch with big game in Ca these days.
            RIP ABBY. You were the finest hunting dog a owner could want.sigpic

            Comment

            • #21
              Whiterabbit
              Calguns Addict
              • Oct 2010
              • 7602

              The barnes bullets are great. You can take your pick, 200, 250, 275, and 290. The 290 is expensive but 6 petal and plastic tipped. Looks like it would form a brutal wound channel.

              But can;t comment on terminal ballistics on flesh, only hard targets and mountain sides.

              Comment

              • #22
                moyneur
                Member
                • Jan 2012
                • 263

                I actually shot some sample loads in 454 but, when I got done it was, why bother. It's a good idea being able to shoot 45s and 454s, but you can shot 460, why bother...
                I purchaced my 460V because I sold my SRH 454 a few years ago and regreted it. Tried to find another and found this, Lucky Me, I have to say I was suprised in the differance in recoil. SRH 454 had alot more recoil 460. This one is a keeper
                I don't shoot 454 or 45C out of my 460s
                be safe
                Ruggy
                The difference between stupidity and genius is that genius has its limits
                ~~Albert Einstein~~

                Comment

                • #23
                  For54
                  Junior Member
                  • Apr 2014
                  • 67

                  +1 i sold my redhawk 454 after i bought the 460v and havent looked back. Thanks for sharing, Enforcer is on my list of powders to try for 460v

                  Comment

                  • #24
                    ruggyh
                    Member
                    • Mar 2012
                    • 203

                    Originally posted by ORNGXTC
                    Great thread. Lots of info. I have wanted to use my 460 for taking a pig recently. How are we with lead free ammo and the 460 for Ca these days. Yes you can say I am a little out of touch with big game in Ca these days.
                    As stated Barnes has good selection of bullets, the 200 and 275 are purpose made for the 460 and I have taken a few games animals with each. I perfer the 200 with #9 and the 275 on 4227.

                    I have also used the 225 and 250 Barnes with the cavaet they were used at close range on pigs when useing dogs. I loaded them on 100% case of Trailboss- much easier on everyone and the dogs and used 460 ES.

                    Cutting Edge 240 handgun Raptors and deadly on pigs, but at premium cost.
                    And of coarse as I mentioned earlier 260 North Fork CPS.

                    Leigh makes a few copper bullets for 460 but I have not tested them so cannot speck to their performance.

                    Pig below was over 400 lbs, shoot at about 15 yards with 200 XPB Barnes out of a 6.5" 460

                    Be safe
                    Ruggy

                    Comment

                    • #25
                      MongooseV8
                      Veteran Member
                      • Apr 2010
                      • 4426

                      Tou have an impressive collection Ruggy. Id love to own one of those black PC Stealth Hunters with the non fluted cylinder. How far would you say the 200 Grain Barnes are ethical in pigs with full tilt loads?

                      Comment

                      • #26
                        ruggyh
                        Member
                        • Mar 2012
                        • 203

                        Originally posted by MongooseV8
                        Tou have an impressive collection Ruggy. Id love to own one of those black PC Stealth Hunters with the non fluted cylinder. How far would you say the 200 Grain Barnes are ethical in pigs with full tilt loads?
                        Terminals should be good to about 250 yards out of handgun and out of Ruger #1 would be 300 yards.

                        Longest shot I have personally taken is 142 and it dropped the 170 pound pig in its shadow, scoped with 2.5-8x Leupold

                        I know a women who dropped a White Tail at just over 200 yards with a Red Dot with her 8 3/8".

                        Off coarse shooting at this distance takes practice, lots of practice.

                        on a good day my Hundred yard target- 3" Shoot and See

                        be safe
                        Ruggy

                        Comment

                        Working...
                        UA-8071174-1