Unconfigured Ad Widget

Collapse

Most efficient but effective load Development?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #31
    longrange1
    Senior Member
    • Dec 2015
    • 1032

    Originally posted by Whiterabbit
    Cause I like statistics and loading ammo (and casting bullets) basically as much as, if not better than shooting.

    Tho I don't go nuts with the annealing, neck tuning on custom rifles, weight sorting crap, etc. At least, not till I measure a difference

    Oh, and to address longrange1's response which you had quoted, I agree. The fun part of modelling load performance (for me) is I get to take all these highfalutin' claims people make on the internet and see if they actually apply in my case. Here's an example: people say they weight sort their brass. I've measured it. Doesn't make a darn bit of difference in my rifle. Maybe you guys don't consider that load development but rather statistical mythbusting, but it does make for a fun range day that keeps bringing me fun hours after I get home from the range

    edit: I'm going back out for load development over the next few months as I can (or get help with) for a new test: David Tubb says hBN coated bullets eliminate first shot flyers. Well, I'm not gonna just start using his product, I'm gonna test it. And there's something thta COULD theoretically benefit me if I were a steel shooter, since I have data (love data!) that shows I have a massive first round issue, and a minor second round issue. Doesn't mean I cna't go long range shooting tomorrow with what I got, but it's sure fun to collect a bunch of first round cold bore data and model it
    the HBN is a myth...yes ive played with it too as well as everything else you can think of...if you have first round flyers you have other issues and HBN is not going to fix it.

    Comment

    • #32
      longrange1
      Senior Member
      • Dec 2015
      • 1032

      Originally posted by Whiterabbit
      First four were a part of load development. First was a part of a velocity screening. From there, I Identified 3 nodes i wanted to explore, I tried long and short OAL with each node to see what I liked best. At that time I also shot more screening and found a 4th node, but didn't do anything with that. Then the last group I mentioned was a 10 round group to confirm where I was at.

      Actually, I probably have even more data around from primer load development, so I'll have even more there.

      But let's be clear. from a "let's take it out and shoot it and have fun" perspective, I was done by the first three groups. That doesn't mean I stopped load developing, just for me, it's a fun exercise.

      But if I wanted to go do something, like shoot groups at 300, or take it to SLOSA and shoot their 700 yard steels, etc, I just take whatever is the latest greatest load and go shoot.

      so the next groups there are incidentals when I was tracking velocity for whatever reason.
      i might be missing something but this still sounds like a lot of load development to me...i..like you..look for velocity nodes but i look for a load at the same time...in 38 or less rounds im done and match ready.

      Comment

      • #33
        Lamski
        Member
        • Jul 2013
        • 368

        Originally posted by longrange1
        gotcha...i can tell you for PRS and prone(unless your talking F-class)that chasing 1 hole groups/loads is kind of a waste of time and components unless its just something you need or want to do.

        first PRS matches can be won with a 3/4" gun...second i dont know anyone that can hold well enough off an obstacle and on the clock to know the difference between a gun that shoots 1/2" at 100yds or 1 hole at 100yds.

        you see i use to chase these 1 hole loads...and with a little tweaking i can get my rifle to shoot one hole groups the problem is i can not go out everyday and shoot those groups and neither can most ppl plus im running back and forth testing this and that when i could actually be practicing.

        what i can do is go out and shoot 1 MOA size targets out to about 1300yds pretty consistently.

        i have also shot just about every load development there is and can tell you that ladder tests,graphs,charts,excel sheets ECT are for the more experienced/advanced shooters not someone new to loading...stick to the OCW method or the one i posted and save yourself a lot of time and frustration.

        this IMHO is the simplest load development there is...

        Find information, resources and relevant links for texasprc.club. This domain may be for sale.


        ive used it with the last 5-6 barrels and every time ive walked away with a load in 38 rounds...i dont chase the lands..my seating depth stays the same for the life of the barrel...when the barrel starts to slow down i add .2-.3g of powder to keep in the speed node.

        i do not shoot BR but i do shoot long range prone,PRS,short range tactical and F-class matches with the same gun and load.

        IMHO load development is the most over thought part of shooting there is(ive been there myself)and most ppl would be better served if they shot more and worried less about the perfect load.
        I hear ya but the nerdy side of me likes to analyze data, go through numbers and spin in circles trying to squeeze every last bit of performance possible.
        lol

        And I guess I also want justification that the money spent on that fancy custom rifle does and will in fact shoot one hole groups while my friends rem700 that costs less then half what I spent wont.


        I guess that time would be much better spent practicing. I'm sure I'll get to that mindset at some point soon.

        Comment

        • #34
          Lamski
          Member
          • Jul 2013
          • 368

          Originally posted by longrange1

          i have also shot just about every load development there is and can tell you that ladder tests,graphs,charts,excel sheets ECT are for the more experienced/advanced shooters not someone new to loading...stick to the OCW method or the one i posted and save yourself a lot of time and frustration.

          this IMHO is the simplest load development there is...

          Find information, resources and relevant links for texasprc.club. This domain may be for sale.


          ive used it with the last 5-6 barrels and every time ive walked away with a load in 38 rounds...i dont chase the lands..my seating depth stays the same for the life of the barrel...when the barrel starts to slow down i add .2-.3g of powder to keep in the speed node.
          There's no mention of a chronograph at all in that development process. How can he be sure that the group he decided on will also shoot at distance? If he is not in a velocity node he could have one shot way over a 1000yd target and the next shot way below right?

          Comment

          • #35
            LynnJr
            Calguns Addict
            • Jan 2013
            • 7959

            No a gun that shoots well at short range will outshoot a poor shooting gun if all the components are the same.
            A gun that shoots well at 1000 yards shoots well at 100 yards.
            Lynn Dragoman, Jr.
            Southwest Regional Director
            Unlimited Range Shooters Association (URSA)
            www.unlimitedrange.org
            Not a commercial business.
            URSA - Competition starts at 2000 yards!

            Comment

            • #36
              longrange1
              Senior Member
              • Dec 2015
              • 1032

              Most efficient but effective load Development?

              He does use a chrony but your right it's not mentioned in the article.

              I load 7 instead of 6 and shoot 1 of each charge over the magneto so I know where I'm at...but then my load in a 6mm creedmoor has been a 115g DTAC .020 off the lands 41.9g H4350,lapua brass with a cci450 in 4 barrels.

              Also in order to be way over then way under at 1000yds your load would have to have a 100+fps ES...a 60fps ES is about 10" at 1000yds.

              Also to add to this...most times if a load shoots well at 100yds it will hold out to 1000yds I've only had a couple of times where a load needed a little adjusting to tighten it up.


              Sent from my iPhone using Tapatalk
              Last edited by longrange1; 09-08-2017, 7:03 PM.

              Comment

              • #37
                longrange1
                Senior Member
                • Dec 2015
                • 1032

                Originally posted by Lamski
                I hear ya but the nerdy side of me likes to analyze data, go through numbers and spin in circles trying to squeeze every last bit of performance possible.

                lol



                And I guess I also want justification that the money spent on that fancy custom rifle does and will in fact shoot one hole groups while my friends rem700 that costs less then half what I spent wont.





                I guess that time would be much better spent practicing. I'm sure I'll get to that mindset at some point soon.


                lol I was the same way and it's not a bad thing because you will learn a lot and learn first hand which IMHO is the best way to learn.

                As far as getting tired of it goes...I did but like I said I can not hold on a barricade or tank trap ect to warrant all the extra work...if I was shooting benchrest I would have a completely different outlook.


                Sent from my iPhone using Tapatalk

                Comment

                • #38
                  longrange1
                  Senior Member
                  • Dec 2015
                  • 1032

                  Here is what a 100fps spread looks like at 1000yds...

                  3000fps



                  3100fps...



                  .5mils at 1000yds is 18".


                  Sent from my iPhone using Tapatalk

                  Comment

                  • #39
                    santacruzgunner
                    Senior Member
                    • Jun 2016
                    • 549

                    Great thread, we all shoot for different reasons.

                    Comment

                    • #40
                      LynnJr
                      Calguns Addict
                      • Jan 2013
                      • 7959

                      If your load has a 100 FPS extreme spread your load development is not just broken it's broken badly!!!!
                      It should take less than 50 rounds to find your load with a trouble free rifle. If it takes more rounds the rifle is bad.
                      Your rifle loads need to be developed in a good rest.
                      Not all bound up or held in place with your hand. If you let go of the rifle in the rest and the point of aim changes your rest needs work.
                      Once your rest is up to the task start your bullets at there longest length be that into the lands or maximum magazine length. Why anyone would work in two directions makes no sense.
                      Now find your powder charge using 1 percent of charge weight as your increment of variation.
                      Now that you have an established charge weight vary your seating depth in only one direction.
                      Don't overcomplicate the process and all your guns will be tackdrivers.
                      Last edited by LynnJr; 09-09-2017, 1:01 PM.
                      Lynn Dragoman, Jr.
                      Southwest Regional Director
                      Unlimited Range Shooters Association (URSA)
                      www.unlimitedrange.org
                      Not a commercial business.
                      URSA - Competition starts at 2000 yards!

                      Comment

                      Working...
                      UA-8071174-1