I got a can of Imperial sizing die wax and the lyman dry case neck powder and together they make sizing a case easy peasy. I usually make my own 10/1 Alcohol/Lanolin mix and spray lube when i do a couple hundred which works great. Sometimes the expander ball can get a little tough on the thicker brass. I took 20 LC Nato stamp cases that I picked up at the range which looked pretty clean and did a quick wipe down with a cloth.
Put a little imperial on my fingers and rolled 5 cases at a time between my hands. Dipped a q-tip in the dry lube and dry lubed the case mouths. It was amazing how easy they all sized and the cases where all shiney after wiping the case lube off. Long winded story about how smooth the imperial wax and mica powder work together. I bet I could lube 20,000 cases and barely put a dent in the 2oz can of wax.
Put a little imperial on my fingers and rolled 5 cases at a time between my hands. Dipped a q-tip in the dry lube and dry lubed the case mouths. It was amazing how easy they all sized and the cases where all shiney after wiping the case lube off. Long winded story about how smooth the imperial wax and mica powder work together. I bet I could lube 20,000 cases and barely put a dent in the 2oz can of wax.
Comment