Unconfigured Ad Widget

Collapse

280gr 357...bad idea?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jakeair777
    Member
    • Oct 2015
    • 324

    280gr 357...bad idea?

    somehow i ended up with some lyman 358009 280 grain round nose bullets, is this even a safe weight to be fired out of a 357 rifle? let alone a revolver. not looking to do anything crazy preferably just somehting low fps. just wondering if this is a bad idea all together?
  • #2
    GILMORE619
    Senior Member
    • Mar 2010
    • 560

    That sounds like a cast bullet for 35 whelan. The heaviest bullet I've seen reloading Info for in 357 mag is 200 grain
    Last edited by GILMORE619; 03-31-2017, 7:10 PM.
    Originally posted by elSquid
    Like Yoda said: "Buy. Or buy not. There is no whine."



    -- Michael
    Originally posted by Pardini
    Obviously, they just threw that shat out there for Calgunners to proof read and expose the loopholes. Now that we have done our part, they will go back and tighten it up and make our fruking airtight.

    Comment

    • #3
      jakeair777
      Member
      • Oct 2015
      • 324

      so probably not a good idea? even with light charge and low fps?

      Originally posted by GILMORE619
      That sounds like a cast bullet for 35 wheelan. The heaviest bullet I've seen reloading Info for in 357 mag is 200 grain

      Comment

      • #4
        jumbopanda
        Calguns Addict
        • Aug 2006
        • 8382

        Bad idea. This is well beyond the range of bullet weights intended for .357 Mag. This bullet is probably over 1 inch long, leaving very very little usable case capacity.
        Mo' BBs.

        Comment

        • #5
          jakeair777
          Member
          • Oct 2015
          • 324

          yuup just a little over an inch long, i think ill save these for something else...lol thanks guys

          Originally posted by jumbopanda
          Bad idea. This is well beyond the range of bullet weights intended for .357 Mag. This bullet is probably over 1 inch long, leaving very very little usable case capacity.

          Comment

          • #6
            robert101
            Senior Member
            • Sep 2009
            • 1997

            Go to your reloading manual and use the starting load data. I'm just kidding you as I've never seen data on a .357 Mag bullet in the 200 grain range. I wouldn't do it.

            Comment

            • #7
              GILMORE619
              Senior Member
              • Mar 2010
              • 560

              Originally posted by robert101
              Go to your reloading manual and use the starting load data. I'm just kidding you as I've never seen data on a .357 Mag bullet in the 200 grain range. I wouldn't do it.
              I believe there's some loading info for a 200 grain cast bullet in Lyman's 49th reloading book. Lee makes a 200 grain bullet mold. Couple of ammo manufacturers have some 200 grain loadings for 357mag.
              Originally posted by elSquid
              Like Yoda said: "Buy. Or buy not. There is no whine."



              -- Michael
              Originally posted by Pardini
              Obviously, they just threw that shat out there for Calgunners to proof read and expose the loopholes. Now that we have done our part, they will go back and tighten it up and make our fruking airtight.

              Comment

              • #8
                stilly
                I need a LIFE!!
                • Jul 2009
                • 10685

                Ultra Subsonic...

                UBER subsonic...
                7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                Need GOOD SS pins to clean your brass? Try the new and improved model...



                And remember- 99.9% of the lawyers ruin it for the other .1%...

                Comment

                • #9
                  Low Light
                  Senior Member
                  • Mar 2012
                  • 788

                  Just throw it.
                  Originally posted by Enfield47
                  I'm rooting for the allied team, I think we won last time but I can't remember. I just remember it was a lot of fun.
                  I know I'm gonna get got, but I'm going to get mine more than I get got though.
                  -Marshawn Lynch

                  Comment

                  • #10
                    Divernhunter
                    Calguns Addict
                    • May 2010
                    • 8753

                    A bullet that long would probably not stabilize in a 357Mag anyway.
                    Just a guess on my part.
                    A 30cal will reach out and touch them. A 50cal will kick their butt.
                    NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
                    SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

                    Comment

                    • #11
                      pacrat
                      I need a LIFE!!
                      • May 2014
                      • 10287

                      Find a friend with a 35 Remington rifle, and do some trading.

                      Comment

                      • #12
                        kmullins
                        Senior Member
                        • Aug 2009
                        • 942

                        That definitely doesn't sound like a .357 magnum bullet I've ever come across. Something that size has to be for a .35 Remington or the .35 Whelen.

                        Comment

                        Working...
                        UA-8071174-1