Unconfigured Ad Widget

Collapse

do i need a chronograph?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • garyngwind
    Member
    • May 2010
    • 363

    do i need a chronograph?

    finally got to shoot my hand loads. It went bang and no squibs. There were 223, 45, and 9mm, with a +5-10% in grains starting from the lowest recommended powder. Grouping wise I really can't tell any difference, since my shooting skill is the limiting factor. So is chronograph the next logical step to verify whether the loads are ideal?

    edit: nevermind, this question was asked many times... reading now.
    Last edited by garyngwind; 02-06-2017, 12:39 AM. Reason: should have used the search button
  • #2
    Michael in California
    Senior Member
    • Jul 2012
    • 690

    It helps. If your accuracy sucks, you will hit it. Buy a cheap one.

    If you accuracy is adequate. You will still hit it. But less often. Buy a medium priced one.

    Comment

    • #3
      five.five-six
      CGN Contributor
      • May 2006
      • 34947

      Originally posted by Michael in California
      It helps. If your accuracy sucks, you will hit it. Buy a cheap one.

      If you accuracy is adequate. You will still hit it. But less often. Buy a medium priced one.

      LMAO

      Comment

      • #4
        aspenvalley
        Senior Member
        • Sep 2016
        • 693

        I want one but I shoot mainly at an indoor range. That is why I have put off the purchase.

        Comment

        • #5
          wbunning
          CGN/CGSSA Contributor
          CGN Contributor
          • Feb 2013
          • 808

          Originally posted by aspenvalley
          I want one but I shoot mainly at an indoor range. That is why I have put off the purchase.
          If you shoot mainly indoors, check out the MagnetoSpeed chrono. I've been using one for a while now, and find it to be a good unit. It affixes to the gun itself, so no worries about setting one up downrange indoors. There ARE limitations, just like with anything. So far the biggest limitation I've encountered is that the unit may not fit on your particular firearms. It will work with just about any rifle, but handguns are a different story. It doesn't work with snubby revolvers, for example. While It works on my glocks, it doesn't seem to fit my Springfield XDs. So I do my velocity tests on the glocks.

          You should check with your indoor range to be sure they allow chronographs. They should have no problem with a magnetospeed.

          Anyway.. worth a look-see:

          MagnetoSpeed chronographs and shooting accessories have been innovating in the firearms industry since 2012.

          Comment

          • #6
            arrowshooter
            Senior Member
            • Aug 2013
            • 724

            X2 on the MagnetoSpeed if you are shooting indoors. Indoor lighting kits can be a pain, plus the range may have an issue with you walking downrange to set up chrono.

            Comment

            • #7
              aspenvalley
              Senior Member
              • Sep 2016
              • 693

              Cool. I will check them out.

              Comment

              • #8
                someoneeasy
                Senior Member
                • Feb 2011
                • 2372

                Originally posted by aspenvalley
                I want one but I shoot mainly at an indoor range. That is why I have put off the purchase.
                how about the lab radar? http://mylabradar.com/

                Comment

                • #9
                  pacrat
                  I need a LIFE!!
                  • May 2014
                  • 10287

                  Realistically, if one load gives you excellent accuracy, and another doesn't. A piece of paper called a target, will tell you which is which

                  Do you really give a crap how fast the bullets are moving?

                  Comment

                  • #10
                    JackEllis
                    Veteran Member
                    • Nov 2015
                    • 2731

                    IMHO consistent speed is important, but you still need to determine whether the rounds all hit the target near one another and speed won't tell you that.

                    I had some difficulty initially because my rest and my technique were bad. Something as simply as looking through the scope consistently makes a difference when you're trying to get small groups at 100 yards.

                    Comment

                    • #11
                      Michael in California
                      Senior Member
                      • Jul 2012
                      • 690

                      I use the chrono as an additional safety tool, not for accuracy. I run loads through the chrono and look at the cases for pressure signs. Using this, I define my maximum load (and to some extent, my minimum load).

                      Within those bounds, I'll search for accuracy. However, now I know I can concentrate on the load I like, not the safety of that load.

                      Comment

                      • #12
                        Capybara
                        CGSSA Coordinator
                        CGN Contributor
                        • Feb 2012
                        • 15787

                        I just bought a Ruger RPR. The Magnetospeed is next on my shopping list. I am disappointed that it will be useless for all of my pistols but for my RPR, which is what really matters, it's a great solution.
                        NRA Certified Metallic Cartridge Reloading Instructor, Shotgun Instructor and Range Safety Officer

                        sigpic

                        Comment

                        • #13
                          wbunning
                          CGN/CGSSA Contributor
                          CGN Contributor
                          • Feb 2013
                          • 808

                          Originally posted by Capybara
                          I just bought a Ruger RPR. The Magnetospeed is next on my shopping list. I am disappointed that it will be useless for all of my pistols but for my RPR, which is what really matters, it's a great solution.
                          As far as I know, it won't work on any semi-auto pistol without a rail, and WILL work on some of that do. It should work on my XDs, but the fit is poor, and I need to make a shim to get it to line up correctly. GTG on the rifle, though.

                          Comment

                          • #14
                            ElvenSoul
                            I need a LIFE!!
                            • Apr 2008
                            • 17431

                            Ohhhh I thought this was about Rolex Watches
                            sigpic

                            Comment

                            • #15
                              stilly
                              I need a LIFE!!
                              • Jul 2009
                              • 10685

                              Look for a Caldwell G2. It might be a great chrono to use indoors. Also, if there are no issues with you simply placing the chrono on the stand and then placing it on the opposite side of the firing line, no need to walk downrange at an indoor range. I like having the tools to tell me what my loads are sitting at though. It helps settle things.
                              7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                              Need GOOD SS pins to clean your brass? Try the new and improved model...



                              And remember- 99.9% of the lawyers ruin it for the other .1%...

                              Comment

                              Working...
                              UA-8071174-1