Reloading Recipes

[TATER313]

I had 16 lbs of unique, reloaded tons 9 and 40. The good about unique is it almost filled the case up, so you don't have to worry about over charging it. I use 4.6 gr of unique for 9mm 124 gr rn copper plated, worked well in all my 9 mm guns. The bad about unique inaccurate powder drops by + - .1-.2 grains, the second you cant find it. Titegroup, CFE pistol have accurate powder drops, titegroup I use 3.8 gr for 9mm 124 gr rn copper plated. by a good manual, look at powder manufacture for load data. CFE i use 5.2gr for 124 gr rn copper plated.

[trackcage]

I've been loading the below for a while now. Works great in all my 9mm and not too hot (despite it being a tad higher than what others here have posted)

CFE pistol: 5.8 gr
Xtreme plated 115gr RN
CCI small pistol primers
OAL I'll have to double check when I get home (I think it was 1.100")