Unconfigured Ad Widget

Collapse

Venturing into reloading... help me build a beginner's kit :)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    JMP
    Internet Warrior
    CGN Contributor - Lifetime
    • Feb 2012
    • 17056

    Originally posted by quadmx301
    I have a few odd calibers that reloading just makes better sense for, and I love the thought of getting more accuracy out of each of my guns.
    In that case, you will definitely want a single stage press. For odd cartridges, you definitely do not want a progressive so you are on the right track.
    Originally posted by quadmx301
    I've been looking at the Lee Precision Breech Lock challenger kit.
    I think the breech lock is a good concept; however, in the press it is somewhat limited as you will need many many bushings, and the press much use the bushings on the die or they will not fit.

    The bushing system speeds things up nicely, but my suggestion would be to get a kit like the RCBS kit as you have more flexibility and the gear is nicer. With the RockChucker, it will come with 1.25" threads and a bushing that adapts the 1.25" threads to the more common 7/8" die threads for the smaller cartridges. In addition, you can still run a lock system with a 1.25" press, but I'd go with the Hornady Lock'n'Load bushings. There is an adapter that will convert a press with 1.25" threads down to a socket that accepts the Hornady LNL bushings for 7/8" dies. I do not believe you can do the same thing with the Lee Breech lock.

    In my eyes, the RockChucker gives you more flexibility as you can still go bushing, no-bushing, or fit a 1.25" die. Plus, I think the RockChucker is a better press.

    That's just my opinion.

    Comment

    • #17
      RR.44
      Senior Member
      • Mar 2012
      • 1934

      Originally posted by quadmx301
      Hi guys,

      been wanting to reload for several years now, and just getting to the point of feeling like it's now a need. I have a few odd calibers that reloading just makes better sense for, and I love the thought of getting more accuracy out of each of my guns.

      I know there's a wealth of information out there, but I wanted to ask everyone what their thoughts are for a good beginner's setup. I've been looking at the Lee Precision Breech Lock challenger kit. Keeping in mind that I expect my quantities to stay fairly low, what kit would you guys recommend that I but, and additionally, what should I add/replace?

      Thanks a lot everyone. You've all been very helpful already!
      Where are you located?, if you are close to me, you can come check out my setup and I can help you get started. PM me if you are in the Whittier, Pico Rivera area of LA County, I'll PM you a list of items you need to start if you like.
      sigpic

      Comment

      • #18
        liber
        Senior Member
        • Dec 2014
        • 1868

        Originally posted by quadmx301
        I know, I know I knew there would be someone who posted something like this!
        The reason I said that is because it seems this question comes up about once every couple weeks. It often ends the same, in a kind of boxing match over which press and/or dies are best for a beginner.

        There are always people that are staunch on saving your money and getting a single stage. These folks will not be brand specific but will just say that progressive will cost way more and it makes more sense to go single stage.

        Once someone mentions Dillon presses, they will be accused of being a "Dillon Shill", especially if others chime in that they are happy with theirs.

        There are only a handful of popular brands, so Lee is always mentioned, as-is Hornady and RCBS.

        The bottom line is everyone has different needs and expectations. read as much as you can and if you can use someone's press before you buy, that's helpful. If you're in the sf bay area you're more than welcome to see my setup, and load some on it.

        Short of finding someone to help you, finding a reloading club is useful. There's been some good deals on used RockChuckers in the Private Reloading Sales forum here.
        sigpic
        --------- liber --------

        From my cold dead end mill...

        Comment

        Working...
        UA-8071174-1