Yall seen this cool casting resource site with load data?

[stilly]

http://castpics.net/dpl/index.php

I found it while at the NOE site looking at molds...

[PoorRichRichard]

Neat. Tag

[NoHeavyHitter]

Looks like a helpful resource - thanks for sharing.

[Pablo5959]

Yes there afilliated with Cast Bootits.
Scroll to the bottom of any page and the link is there.

There is a lot of good stuff but so far, on there data lookup that I need, there's no OAL listed.

[Capt.Dunsel]

Yes there afilliated with Cast Bootits.
Scroll to the bottom of any page and the link is there.

There is a lot of good stuff but so far, on there data lookup that I need, there's no OAL listed.

I saw that there was OAL listed just to the right of Max Velocity. But I don't know which specific round you were looking for

[3006mv]

You only now found this?
You need to get on castboolits more.
This is where I get my printable targets too.

[stilly]

I know, I am late to the party with it, but it is one of those little things...

And Pablo, you should be able to scroll over inside that little window and find the lengths.

[Pablo5959]

I know, I am late to the party with it, but it is one of those little things...

And Pablo, you should be able to scroll over inside that little window and find the lengths.

Maybe I'm missing something but we are talking about the cast boolit look up data?
.357 and 44mag all ether say 0.00 or 2.00 under the column under OAL.

I'll look for a window when I get home.

It's frustrating Lee doesn't give data for there own molds but will for some of there competitors.

[Norcal_tom]

nice, tagged

[stilly]

Maybe I'm missing something but we are talking about the cast boolit look up data?
.357 and 44mag all ether say 0.00 or 2.00 under the column under OAL.

I'll look for a window when I get home.

It's frustrating Lee doesn't give data for there own molds but will for some of there competitors.

No sorry. You are correct. WTF/ That site sucks.

MODS!

DELETE THIS THREAD!

I guess you should fill in the blanks with similar loads in that size/weight.

[Whiterabbit]

I know, I am late to the party with it, but it is one of those little things....

Better late than never. And it has data for surplus powder in unconventional cartridges.

Just in case you wanted to make that $40 per 8 pound 50 BMG powder work in a gun you actually own.

...It's all that will be left on the market in the second week of November 2016...

[stilly]

Better late than never. And it has data for surplus powder in unconventional cartridges.

Just in case you wanted to make that $40 per 8 pound 50 BMG powder work in a gun you actually own.

...It's all that will be left on the market in the second week of November 2016...

YA know... I have often wondered if that 50 BMG dust was good for anything else...

[Whiterabbit]

makes stronger-than-cat-sneeze cast loads in 7x57 just fine. How cheap does shooting that rife get when your powder is $40per 8 lb and your bullets come out of a LEE custom mold. Makes you think twice about the cost of a primer or a gas check.

[AandO]

YA know... I have often wondered if that 50 BMG dust was good for anything else...

Me too. If I did not have to head out to a 9 am appointment I'd start a thread on just that.

[stilly]

So then the thing to do is to grind up some 50BMG powder and see how it affects the burnrate...