Reopening Part Deux! We have a more powerful server, twice the CPU and four times the RAM.
I'm kind of afraid to say this but... let's stress test this thing!
My experience has been that cheap ammo will almost always produce crappy results when compared to quality ammo.
Why do folks buy cheap ammo and expect good results? Some cheap ammo is better than other cheap ammo, but what should a person expect?
"Self defense is not a fashion show. A defensive handgun is not a little black dress, or a purse."
Remember, the overwhelming majority of anti-gun thinkers are not stupid enough to be "afraid of guns." They are afraid of stupid/immature/crazy psycho people with guns.
And as always, being friendly, courteous, and respectful is the easiest way to bend people to your will.
What makes some ammo cheap and others not cheap? I'm honestly asking as I'm trying to learn more about the subject. There's lots of companies besides winchester and Remington but what makes some ammo sub-par? If cheap ammo us made w quality components is it still cheap? Or is it more the ammo were the actual projectiles are all lead and made in someone's garage without proper quality control? The only thing I can think of is that the actual projectile is not properly balanced. Maybe this is a question for a ballistition. (Sp).
Try Winchester RA9T ammo for the P226. My shooting team members use that ammo for the competition. They are very accurate for my pistols, also. They are sub-sonic and have long bearing surface. I shoot this ammo about 90% of time in my pistols.
They are not cheap ammo, but worth a try for a box.
Cheap ammo is not always about the
Components. It's about the way it's assembled. When powder charges and crimp pressures change between rounds then ur accuracy suffers. Cheap is always associated with poor process and quality control. Why do people automatically assume means cheap components?
I find my that my hand loads in every caliber are the cheapest and most accurate in every firearm I own.
Whether or not factory ammo will shoot well in yours depends on a lot of variables. Bullet weight and type, velocity (powder), and overall quality control of all components and the construction of each loaded cartridge. The more expensive factory ammo will have the best quality control and consistency, doesn't mean it's going to shoot well out of your firearm.
I can not complain about any of my cast lead pills. After PC they seem to shoot accurate enough to hit a 6" dinger at 125+ yards out on the first shot. They missed the next 6 shots, but they were close and they knew the mission was already accomplished so I did not fret them... They are good. I am thankful for being able to cast and for the guidance that I have received here and the knowledge that I picked up at castboolits.
Too bad OP does not cast or reload. He could throw those results into the mix as well...
7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...
Cheap ammo does not have to be accurate. At the typical distance cheap ammo is used, whatever accuracy you get is satisfactory for the typical end user.
I appreciate the recommendation. I will need to give it a try. It seems a little cheaper than the Remington Ultimate Defense 124 gr HD9MMBN I use for defensive purposes. However, I would expect any 9mm round that costs as much as much as a cheap 7.62 x 51 to be more accurate.
In fact, I was kind leaving the #1 rating to the expensive stuff.
What do you use for practice ammo? How does it compare?
I just use RA9T primarily even for the practice. I have plenty of them. If you are local in Los Angeles area, I can give you some to try.
Sometimes, I use Winchester or Federal 124 grain FMJ ammo. They are good ammo, too.
From my experience, Sigs tend to have smaller chambers, so I'd think most factory ammo would do better for it as the factory ammmo is set to universally fit all chambers, so it's most likely closest to fit a Sig or CZ with small chambers.
I use a Sig X5 for 9mm target shooting and I do so with a 121 or 125gr 38 Super JHP Zero, and I am using CFE pistol near 5.3gr.
For factory bulk ammo, I generally do not notice a huge difference at 15 yards with 9mm, especially since my handgun skills are not up to part to make such a distinction. Where I notice a difference is in longer shots, and I prefer bullets that have good concentricity and JHPs as they seem to stabalize a bit better. Generally, the 100 round value packs of Federal Champion work well as they are the cheapest. In factory ammo, the one I'd avoid like the plague in all cartridges is Armscor; that stuff is truly awful.
Generally speaking, most name brand commercial ammo you buy should be good to go. Yeah, perhaps something like Tula or PPU may be dirtier and *slightly* less accurate than your winchesters or remingtons, but they should all get you relatively on target, at least to get a fist sized group at 10 yards. It could be you got a bad batch, but I kind of doubt it. Perhaps you should start closer in, maybe 5-7 yards, then go outwards?
What I would stay away from are buying reloaded ammo from someone you know little about. Freedom Munitions (And another company I forget) are trustworthy reloaded ammo, but if it's from some dude selling it from the back of his truck, unless you know him personally and his reloading capabilities, I'd stay away from that.
So many variables in ammo. Slightly different powder charges by +/- .2 grain, depth of seating, tightness of the crimp, even as someone pointed out perhaps slight differences in the balance on the bullet. Could less expensive bullets be made with differing degrees of lead hardness or the jacket be different?
Comment