Unconfigured Ad Widget

Collapse

Brass question.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dukman
    Member
    • Aug 2011
    • 177

    Brass question.

    Don't know much about reloading or brass quality and worth besides what I have been reading on the net. Is 'WCL 58' and 'WRA 68' brass (looks to be tumbled??) worth more because of its alleged quality than other brass? Thanks for any info you can provide !
  • #2
    J-cat
    Calguns Addict
    • May 2005
    • 6626

    It's not worth much if you don't know how many times it's been fired and in what.

    Comment

    • #3
      FLIGHT762
      Veteran Member
      • Mar 2009
      • 3072

      EXACTLY ^^^^^^^^^^^^^^^^^

      WCC 58 and WCC 60 Match brass is coveted because in those years, the brass was made very thin. Reloaders were able to load the 190 gr. bullets better because of the increased case capacity.

      It would be pretty rare today to find original, once fired Match WCC 58 & 60 brass.

      I have a good pile of WCC69 once fired cases that I scrounged in the 1970's that was fired in rifles. It was standard M-80 ball that I now use for my GAP 10, but it is just good Military brass, nothing real special.

      Here's a good article with photos of the coveted WCC58 & 60 brass in the rifleman's Journal :
      Blogger is a blog publishing tool from Google for easily sharing your thoughts with the world. Blogger makes it simple to post text, photos and video onto your personal or team blog.


      If the cases have a NATO cross on the headstamp and with a crimped in primer, the brass is standard Military brass, nothing special.

      If the brass you are referring to has been deprimed and tumbled, you have no idea of where it came from or how many times it has been fired or what it was fired in. Even if it is once fired, It could have been linked ammo fired in a machine gun and not worth a premium. You have to know what you're buying or you can easily get screwed.
      Last edited by FLIGHT762; 04-05-2015, 12:34 PM.

      Comment

      • #4
        stilly
        I need a LIFE!!
        • Jul 2009
        • 10685

        ^^^^^^^^^^^^^^^^^^^^ The above answers sound very sound.

        As a side note, I would be sure to stay away from antique roadhouse with it or else they might tell you each case is worth $4000... And an additional $2000 if it is the original projectile, primer and powder inside.
        7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

        Need GOOD SS pins to clean your brass? Try the new and improved model...



        And remember- 99.9% of the lawyers ruin it for the other .1%...

        Comment

        • #5
          Dukman
          Member
          • Aug 2011
          • 177

          Thanks for the info gents! I certainly appreciate it. This brass came from an estate. It looks to be tumbled and still has the primer. It also looks to be in really good shape. I know that looks can be deceiving...but this guy was an avid reloader and had a ton of different brass. I have to believe he wouldn't have 'junk' lying around. All that said...what would be a price or value range for 7.62 and 30.06? I am still going through all the other brass. Thanks again !

          Comment

          • #6
            J-cat
            Calguns Addict
            • May 2005
            • 6626

            Look at the case mouth for evidence of trimming. Look at the rim for multiple extractor marks. Do the primers have sealant still on them?

            Comment

            • #7
              Dukman
              Member
              • Aug 2011
              • 177

              Originally posted by J-cat
              Look at the case mouth for evidence of trimming. Look at the rim for multiple extractor marks. Do the primers have sealant still on them?
              Will do! Would the sealant have a particular color? I can check for extractor marks...but not sure what evidence of trimming would look like...? Thanks for the suggestions! I'll look closely when I get home...

              Comment

              • #8
                JMP
                Internet Warrior
                CGN Contributor - Lifetime
                • Feb 2012
                • 17056

                OP, if you can, the best way to load is when you start with a set of brass where you can track it's history back to inception. This gives you the most uniformity, which translates to better precision. One thing that can help is if you sort the cases by weight as if they have the same headstamp, weight can give you an idea of what cases are more likely to be uniform.

                In general, it is almost always worth it to buy the most expensive brass that is available for a cartridge. It will produce better results and save you money in the long run as you will get more firings out of it. For common brass makers, I prefer Lapua over all else, followed by Norma.

                Comment

                • #9
                  J-cat
                  Calguns Addict
                  • May 2005
                  • 6626

                  Originally posted by Dukman
                  Will do! Would the sealant have a particular color? I can check for extractor marks...but not sure what evidence of trimming would look like...? Thanks for the suggestions! I'll look closely when I get home...
                  A trimmed case will have a perfect square case mouth whereas a factory case will have a case mouth with teeth (if that makes any sense). Look at some 1x fired cases and you'll see what I mean. I'm not talking about the crimp marks, but the front edge of the case mouth. Primer sealant should be rose colored.

                  Comment

                  • #10
                    Dukman
                    Member
                    • Aug 2011
                    • 177

                    Originally posted by J-cat
                    A trimmed case will have a perfect square case mouth whereas a factory case will have a case mouth with teeth (if that makes any sense). Look at some 1x fired cases and you'll see what I mean. I'm not talking about the crimp marks, but the front edge of the case mouth. Primer sealant should be rose colored.
                    Thank you Sir. All this info helps! Im pretty sure this stuff has the rose color around the primer...but haven't been home yet. Will take a look in the next day or two. Have a good one !

                    Comment

                    • #11
                      Dukman
                      Member
                      • Aug 2011
                      • 177

                      Originally posted by Dukman
                      Thank you Sir. All this info helps! Im pretty sure this stuff has the rose color around the primer...but haven't been home yet. Will take a look in the next day or two. Have a good one !
                      So the primer sealant is rose colored; there looks to be only one of two (opposite each other when two) extractor marks and the top of the casing doesn't look perfect as if trimmed.

                      So I would say safe to assume once fired. If this is the case...any idea on value? They are in both 30.06 and 7.62...

                      Thanks again!!

                      Comment

                      • #12
                        J-cat
                        Calguns Addict
                        • May 2005
                        • 6626

                        I'd list them for 50 cents a piece on gunbroker and see what happens.

                        Comment

                        Working...
                        UA-8071174-1