SSD's are cheap enough to make them a must for new computers.
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Building First PC - PSU question
Collapse
X
-
-
Dont you hate that? Lol
I would say SSD or a higher speed HDD. But like someone else said, SSD are getting so cheap now that you might as well get one.
I wouldnt worry about it really. Go do 3Dmark test and see what you get. But according to Windows, they rate it using the lowest score or whatever but technically I think you should have a higher score.A note to the NSA or anyone gathering information on me, this disclaimer is for you..."Everything I type on this website Is purely fictional and for entertainment purposes only. None of it is true."
Also, sometimes I type in CAPS to emphasize a POINT. Please dont interpret that as YELLING. Sorry if I HURT any fuzzy little bunny's FEELINGS out there.Comment
-
Make sure you have the latest drivers for your motherboard. Also, did you use the highest speed SATA connector on your motherboard? Some motherboards have both 6 Gbps and 3 Gbps connectors. They are usually different colors. SSD can help A LOT - especially with boot time.He who exercises no forethought but makes light of his opponents is sure to be captured by them.
-Sun Tzu, The Art of War
I say thank God for government waste. If government is doing bad things, it's only the waste that prevents the harm from being greater.
-Milton Friedman
What kind of government do you guys got here? This is worse than California.
-Woody Allen, SleepersComment
-
Im going to have to open it up. I might have used the old cable from my old drive on the new one and the new one and my secondary drive lol
And about raid. I have no idea whats that.
I know my primary is at the 0 location and the secondary at the 1
both drives are 1TB each
Comment
-
RAID is Redundant Array of Inexpensive Disks. The numbers signify different ways of arranging your drives to achieve certain levels of performance. The most common set ups are RAID 0, 1 and 10.Im going to have to open it up. I might have used the old cable from my old drive on the new one and the new one and my secondary drive lol
And about raid. I have no idea whats that.
I know my primary is at the 0 location and the secondary at the 1
both drives are 1TB each
RAID 0 is where you use two drives ultimately acting as one single drive. You will gain a large performance boost from this, but no redundancy. RAID 0 was very popular back when people wanted performance gains without having to spend much money. SSDs are so cheap now and performance levels are so great that RAID 0 isn't really necessary unless you have extra disks laying around and don't care about redundancy at all.
RAID 1 also uses two disks, but has limited performance gains (Theoretically none at all) but you gain redundancy in the sense that if one drive fails, you still have a mirror image sitting in your machine that you can isolate and use as a normal drive until you replace the failed drive and recreate a RAID 1 array. Essentially what RAID 1 does is writes all yoru information to both disks in the array, creating a carbon copy of everything you do. Your system will act as if you have a single drive.
RAID 10 combines the best of both worlds and uses 4 disks to create both a performance boost and full redundancy.
There are other RAID configurations that achieve different things, though they start to get into more specialized tasks and the benefits tend to focus on a more specific goal, and thus you don't see these arrays as often.Last edited by Meety Peety; 09-12-2014, 11:56 PM."Everybody is a genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is stupid." - Albert EinsteinComment
Calguns.net Statistics
Collapse
Topics: 1,870,842
Posts: 25,176,509
Members: 358,862
Active Members: 5,396
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 28324 users online. 173 members and 28151 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.



Comment