Unconfigured Ad Widget

Collapse

No screen after computer build help!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    Markus
    Senior Member
    • Mar 2010
    • 1762

    A pictures worth a thousand words maybe this will help...

    Comment

    • #17
      Deadbolt
      CGSSA Associate
      • Dec 2009
      • 6552

      Originally posted by Markus
      Well I plugged in the other power cable and nothing happened. I looked at the mobo main power and it looks like the clip isn't on all the way could it be that the cable is just a wee bit loose?

      I never removed my monitor from its power source I just unplugged itfrom my old graphics card and plugged it in wheni installed everything else. Also getting no beeps when it turns on...
      not even just 1 beep ?
      Just another Boy and His Dog.

      Comment

      • #18
        Deadbolt
        CGSSA Associate
        • Dec 2009
        • 6552

        Originally posted by Markus
        A pictures worth a thousand words maybe this will help...

        are you sure your motherboard doesnt have a 6/8 plug somewhere? Perhaps under the videocard? MSI is usually decent but they have had strange arrangements before....
        Just another Boy and His Dog.

        Comment

        • #19
          Markus
          Senior Member
          • Mar 2010
          • 1762

          There is an 8 plug in the top left which the wire is going to in the top left
          Last edited by Markus; 12-02-2012, 6:24 PM.

          Comment

          • #20
            Deadbolt
            CGSSA Associate
            • Dec 2009
            • 6552

            probably a grounding issue with the way he installed w/ the screws.
            Just another Boy and His Dog.

            Comment

            • #21
              MotoriousRacing
              Senior Member
              • Oct 2012
              • 1971

              Check you monitor to see if it is looking for the correct input/source (VGA, DVI, HDMI, RGA, etc.? It may not auto detect.

              Comment

              • #22
                Montu
                Senior Member
                • May 2011
                • 1589

                you already re seated the cpu right?
                K.F.K|Μολὼν λαβέ

                Comment

                • #23
                  Markus
                  Senior Member
                  • Mar 2010
                  • 1762

                  I haven't reseated the cpu

                  Comment

                  • #24
                    MotoriousRacing
                    Senior Member
                    • Oct 2012
                    • 1971

                    can you verify you have checked in the BIOS that the output is via PCIE and not onboard. Also verify your monitor is on correct input setting.

                    Comment

                    • #25
                      Markus
                      Senior Member
                      • Mar 2010
                      • 1762

                      Well I don't get a bios screen so I'm not sure how I can check the settings...

                      Comment

                      • #26
                        Markus
                        Senior Member
                        • Mar 2010
                        • 1762

                        I swapped out my graphics card with my old one and plugged in the monitor to no avail. So the problem is not the graphics card.

                        It doesn't have onboard video either.

                        Fiddling with my ram I noticed I could remove it without havin to move the clips that held it in place does that mean its not seated properly? Looks like the ram isn't compatible...

                        Looking on newegg I see in the reviews some people having doa psu with this model... Should I return the ram and the psu and get some others?

                        How do I tell if I grounded the mobo when I screwed it in?

                        I'm goin to grab some dinner now and a multimeter to check the voltage from the psu... So now it's down to bad mobo or bad psu I guess...
                        Last edited by Markus; 12-02-2012, 11:02 PM.

                        Comment

                        • #27
                          Markus
                          Senior Member
                          • Mar 2010
                          • 1762

                          I have built a computer once before but everything just worked last time.

                          I tried what you said about the ram it had no effect whatsoever. Admittedly I haven't used the old psu because its midnight and I've spent all night working on this thing to no avail.

                          Here's the ram I got its ddr3 1600 240 pin but its not listed as compatible with this mobo on twir website I didn't know that they only had some compatible versions

                          Comment

                          • #28
                            castgold
                            Senior Member
                            • Feb 2012
                            • 1531

                            I have some working DDR3 sticks you can borrow if you want to try to rule out the bum RAM theory. I'm in Irvine.

                            Kris

                            Comment

                            • #29
                              olhunter
                              CGN Contributor
                              • Dec 2008
                              • 3707

                              Originally posted by Markus
                              There is an 8 plug in the top left which the wire is going to in the top left
                              You only use one of the two 4-plug connectors, not all 8. It looks like a row of eight, but it's actually two 4's.

                              Plug the 4-pin into one or the other and try it. If it doesn't work, switch the plug to the other one and try again.

                              Usually only one of the 4-pin connectors will work right, so if all of THAT didn't work, try both plugs with the other 4-pin
                              connector on the cable.

                              You just gotta get the right 4-pin connector into the right 4-pin plug. I'll bet this is your problem.
                              Last edited by olhunter; 12-03-2012, 8:13 AM.
                              It cannot be inherited, nor can it ever be purchased.
                              You and no one alive can buy it for any price. It is impossible to rent and cannot be lent.
                              You alone and our own have earned it with...Your sweat, blood and lives. You own it forever.

                              The title is....."United States Marine".


                              sigpic

                              Comment

                              • #30
                                whatpain
                                Senior Member
                                • Feb 2011
                                • 664

                                make sure your ram is seated correctly as in take it out and re-seat it

                                Comment

                                Working...
                                UA-8071174-1