The Ultimate Key!

[ElvenSoul]

Sweet!

http://mykeyport.com

Thinking of ordering one!

[redrex]

There are a couple different solutions along this lines these days.

https://www.google.com/search?q=switchblade+key+holder&es_sm=93&qscrl=1&source=lnms&tbm=isch&sa=X&ei=VNNwVZfFIYy1oQT1voPIBA&ved=0CAgQ_AUoAg&biw=1920&bih=1139

[stilly]

Sweet!

[sealocan]

That looks very cool but I'm waiting for Glock to come out with one...





in .22 single stack / slim profile of course.





;-) it shouldn't be too long now, right?

[stilly]

Not to change the topic, but I saw on Ebay someone was selling Sriracha sauce bottles that fit on your keychain. They are apparently TSA safe as well...

If I had an Ultimate key then I would also have a sriracha bottle next to it too

[Whiterabbit]

I bought this one from EDC:

http://www.gizmosforgeeks.com/uploads/2015/02/keysmart-with-3-keys.jpg

I like it a lot, actually. I don't have to buy special keys and eliminated the jangle. Simple design, no moving parts, no springs, Viton orings for friction fit. I got the bottle opener upgrade on the keyring section so hopefully the TSA will stop confiscating my beer key.

[stilly]

I bought this one from EDC:

http://www.gizmosforgeeks.com/uploads/2015/02/keysmart-with-3-keys.jpg

I like it a lot, actually. I don't have to buy special keys and eliminated the jangle. Simple design, no moving parts, no springs, Viton orings for friction fit. I got the bottle opener upgrade on the keyring section so hopefully the TSA will stop confiscating my beer key.

Hey that is cool. Do you have to drill a hole through your keys as well? I imagine that you need to else they can bounce all over.

[Marauder2003]

Oh great. Unknown quantity of people you don't know now have your address and the keys to your house!

[Whiterabbit]

Hey that is cool. Do you have to drill a hole through your keys as well? I imagine that you need to else they can bounce all over.

Technically, no. Keys already come with holes so you can get keyrings through them.

That said, ONE of my keys was slotted at the top and too narrow to fit the hole. I took a triangle file to that key for about 20 seconds to open up the slot in one spot.

Friction and the Viton o-ring keeps everything together very nicely. The only real problem is I keep it on my retractable clip that holds my badge at work, and it's just a smidge too heavy for the spring strength of the std issue retractor.