EAI's Biggest Coolest SHOT 08 Picture Show

[duenor]

Pull up a chair, pop a beer, and enjoy my 2008 SHOT Picture show, sponsored by Entreprise Arms, FAL receiver manufacturer & FAL builder, 1911 DoubleStack Manufacturer & Builder, and maker of our Instictive GS handgun sights. www.entreprise.com

Kevin, EAI Customer Relations Representative
**All pictures were taken with the explicit permission of the company representatives.**


Briane and Me, and a pair of FAL MBRs at the Entreprise Arms booth.


Steyr AUG MG


ELAN Thermal Vision (very very bad***) $16,000+


Carbon Fiber FF HG. The brown one supposedly went to Iraq for 6mo.


Barett 50BMG New Version, Bolt Action. I met Ronnie B.


New Insight Light. $140 includes 150lumens, strike bezel, rounded belt clip (no more scratched cars), 2hrs on full power, 300 on low, built in dimmer and strobe functions, includes rechargable lithium battery and charger. nice! I'm supposed to get a test model and I'll post a review if I do.

----more to come....

[WokMaster1]

Kevin, I'm ready. Where's the show? Only a pix of you with a bullpup rifle.....?????

What's that anyway? Cal legal that you guys are carrying?

[duenor]

My New Car. 500-600 brinell all around. Rotating center hatch. stops 50BMG cold. 22,000lbs, $230K.


Rechargable flashbang


Newest Magpul stock. Forgot the name. Fits the ACR (Masada)


Speaking of the Masada... on a Magpul PRS


Tapco T6 10/22 stock. Actually VERY nice stock and fit.


RPG!!!

[duenor]

Meet HK's Thumper 40mm GL Select Fire


HK PDW 9mm Select Fire


Ruger goes EBR! TAPCO 580ser. Mini14, SAGE 580ser. Mini14. 16" barrel, 580ser. gas system, rounded receiver. NRA model will ship for $1099 MSRP includes 2x 20rnd mags W/O LEO markings. They will sell the 20rnd mags now to the commoners.


FN SCARS MG Nylon Polymer Receiver (like the Masada/ACR). I'm not convinced, either, that this is the way to go. But maybe it is just because I am too rooted in stout wood and cold steel...


FN's new less-lethal system. Fires 1.5oz of powdered bismuth. backed by another .3oz of OC. OUCH. Designed for EoTech for straight-on shooting (no lobbing as with paintball guns). AKA the third nipple maker


SIG P250. Actually quite nice trigger pull for short fingers and feels good. Not great but good. I tested the mag disconnect and it was just fine. I also stripped the gun way down - the ATF gun itself is about 2 inches long and is a little piece of steel that encompasses the entire trigger and sear system. The polyer "frame" - SIG adamantly calls it a grip - is not regulated. SIG will carry a whole bunch of "grips", small medium and large. The gun has a loaded chamber indicator that pops out to the side showing red, a mag disconnect, and no protruding hammer. I like it but am not about to ditch my P228 for it. For the right price, I'll buy it.

[duenor]

SIG 556 MG.


Kimber / DSA's Hooters Booth Bunnies and Me. So... EAI or DSA? =P


Now this is WAY cool. I went all over looking for the GSG because it was so hyped up. And, indeed, I had wanted to buy one as soon as I heard about them. But I was dissapointed. The gun is very Airsoft like, including the receiver housing. Further, when I asked the AMCHAR rep to show me how the gun disassembled, he looked at me like I was speaking Klingon. The guy turned to his buddy, they looked at each other quizzically, then he turned back to me and emphatically said, "Look, this isn't like an AR... you don't." Huh?? "You don't need to disassemble this gun?" "No, I guess not. It's a 22LR, not a centerfire. Just put a bore snake down it." "But what about the action?" The other guy chimes in. "You only need a bore snake." "So you don't disassemble it?" "No, it doesn't look like it!" ooooookkk....... I just turned and left, didn't even bother with a picture. On THR a moderator reviewed it and found it to be good. Well... time will tell. I personally am not convinced, especially after I found that the SIG Mosquito was also designed by these guys. On that note, I asked SIG if the Mosq. had been revised in its new version. The rep said that the new one ran perfect, and acknowledged that the old models had problems. I asked if there was a swap program, and was flatly told that isn't. However, he invited me to send it back to SIG if it had problems. Well.. guess what.. I did... spent $80... waited a month... and was told by SIG that my pistol runs just perfect. Yeah, whatever. Still james pretty frequently, and using the very best CCI minimag at that. So.. bottom line, time will tell. I really hope that I am wrong about the GSG.
....- Anyway, this is KelTec's SU22. It is a pistol gripped, collaspible stock, 22lr rifle using Ciener 22AR magazines. This seems to be a BIG winner esp for us in CA. Furthermore, they SPECIFICALLY tested this gun with all sorts of ammo and found only Remington Golden Bullets to be problematic. Federal bulk pack supposedly runs like a champ! I am VERY excited about this gun. 1/2x28 AR muzzle threading too.


Now here's another way cool pic. This is Kel-Tec's RFB. Remember it? The front ejecting bullpup FAL magazine 308 semi auto? It is a LOT more robust than the SU16, and is at least 65% steel. Very heavy weighty rifle. I held it and I was very impressed by by its ergonomics and its features. Most importantly, I spoke with the guy that you see shooting the RFB in all the youtube videos. We spoke about CA, and he said that they would seriously consider a CA model with regards to magazine and barrel length. WAY TO GO KEL TEC. Consider this: a 30" 308 rifle that has a 20" barrel. Uses grandfathered FAL magazines. Bullpup. And... accuracy is supposedly about 2-3" at 100 yards.

[69Mach1]

Nice photos. I was there Sat and Sun and had a great time.

[pottymouth310]

Great photos! job well done!

[duenor]

WOLF's Anaheim Sales Manager and I. GO WOLF. Their other Sales Manager is really cute but she was shy and didn't want to be photographed with me. That's ok - turns out that the guy and I know each other (sort of) from years back. Odd, ain't it.


Arsenal's newest very NFA AK. Yes, that is a suppressor. By the way, I'm going try to go to bat for CA with Arsenal... IN BULGARIA. Yup, I'm going to try to talk to corporate on their own turf. BTW, apparently Arsenal is up to their neck with military orders that they can't sell receivers at this time, even the ones made here in the US. I think I felt Boxer and Feinstein get cramps all the way from here in Vegas.


Bling Bling! DPMS, n****! Bling!


Another MASADA pic (now the ACR).


My new DMR. 2" at 100. Check out that mount. Best one Ive seen yet.


Me and Walther's latest Olympic pistol. The grip is very very rough.. it is meant for you to customize.

[duenor]

SIG goes Mall-Ninja.


HE Grenades, anyone?


Rhiann and Me at the EAI Booth.


Briane and our P325 1911 DS. That's Oleg Volk's work in the background.


Our Ghost Ring GS Trijicon sights. They are quite good and extremely reflexive. I was skeptical at first, but after doing transition drills (drop the primary and switch at a moment's notice) and night-time stress drills I'm convinced that this is after all the way to go - especially after in one drill my weak hand was "incapacitated" and I had to reload using the rear sight on my rigging.

[duenor]

And, Finally, one last pic of Briane with the P325 at the low ready.

Thanks for watching, friends -
Kev
Entreprise Arms Customer Service Representative

https://www.entreprise.com

[Stormfeather]

WOW. . . . . . . . . .

[ldivinag]

Now here's another way cool pic. This is Kel-Tec's RFB. Remember it? The front ejecting bullpup FAL magazine 308 semi auto? It is a LOT more robust than the SU16, and is at least 65% steel. Very heavy weighty rifle. I held it and I was very impressed by by its ergonomics and its features. Most importantly, I spoke with the guy that you see shooting the RFB in all the youtube videos. We spoke about CA, and he said that they would seriously consider a CA model with regards to magazine and barrel length. WAY TO GO KEL TEC. Consider this: a 30" 308 rifle that has a 20" barrel. Uses grandfathered FAL magazines. Bullpup. And... accuracy is supposedly about 2-3" at 100 yards.

wow... now i having to look forward to, in 2008...

this looks cool and from the youtube vids, i like how the brass ejects from the front...

lefties will love it.

[NSR500]

That KelTec SU22 looks like a Winner to me. BTW, Did you happen to catch a price on it?

[duenor]

Indeed. of everything at shot, Kel Tec turned out to be the most impressive. I had not expected that... just when the general community seemed to be about to dump the SU16 and KT, they came out with a total winner that no one expected. I didn't catch a price because they don't have a price yet - but KT plans to. I expect it to sell retail for about $500 to perhaps 600, about the same as the GSG. I -hope- that it will sell retail for about $450 which would give it a solid lead over the GSG. By the way, for the folks in free states the SU22 will ship with a 27rd magazine.

[ldivinag]

impact guns is taking preorders for the RFB for $1800...

http://www.impactguns.com/store/KEL-762.html