Unconfigured Ad Widget

Collapse

Fun in 3D

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • morrcarr67
    I need a LIFE!!
    • Jul 2010
    • 15075

    Fun in 3D

    PXL_20261102_022539566.jpg

    I know some of you have 3D printers and others are thinking about getting one. I say get one before the new 2A blocking gets triggered. This is my latest 2A print that I'm working on. A 10/22 receiver and chassis. I plan on making this one a shorty cause I can do that in OK.

    PXL_20261105_224409490.jpg

    PXL_20261105_225539313.MP.jpg

    PXL_20261106_024002312.jpg
    Attached Files
    Yes you can have 2 C&R 03 FFL's; 1 in California and 1 in a different state.

    Originally posted by Erion929
  • #2
    Scotty
    Senior Member
    • Dec 2005
    • 2164

    The blocking tech did go into law, but nothing will come of it. It requires ASME to develop a standard. ASME doesn't have anything related to that on the future list and probably won't ever since it's a bunch of engineers in the industry that realize it is impossible.

    Comment

    • #3
      user120312
      CGN/CGSSA Contributor
      CGN Contributor
      • Mar 2012
      • 8788

      Thanks OP and nice kit. In an abundance of caution I'll check the Prusa and Orcaslicer forums to see if and how this may or will affect air gapped machines of Prusa make. Part of the reason I settled on an air gapped machine with open source control was to keep fascists and Communists out of my business.

      If I may ask, what are you using to dry and store your engineering filaments, particularly the hygroscopic ones? Your prints look very nice. What's the relative humidity in your location?

      My print area RH varies from 60 to 65% pretty much all year, sometimes up around 70. That's hard on filament. I use dessicant but I think a more active approach is warranted. I was looking at the Sunlu i10 cabinet that will be out soon.

      TIA for any advice.

      Comment

      • #4
        C.G.
        Calguns Addict
        • Oct 2005
        • 8259

        Originally posted by user120312
        If I may ask, what are you using to dry and store your engineering filaments, particularly the hygroscopic ones? Your prints look very nice. What's the relative humidity in your location?

        My print area RH varies from 60 to 65% pretty much all year, sometimes up around 70. That's hard on filament. I use dessicant but I think a more active approach is warranted. I was looking at the Sunlu i10 cabinet that will be out soon.

        TIA for any advice.
        I've had this one for a while, it has been reliable (as opposed to some of their earlier modesl which didn't last more than 3-4 months, I almost did not buy it because of that), but it was cheaper when I bought it:
        Amazon.com: Sovol Filament Dryer 4 Spools, SH03 Dry Box w/ 85℃ Max Temp, 1.75/2.85mm | Sealed Filament Storage Box w/ Auto Dehumiditification, Dual Independent Heating Chambers for PLA PETG ABS TPU ASA PC PA : Industrial & Scientific

        I live near the ocean so lots of humidity in my area. If you have an enclosed printer you can feed the filament through proper PTFE tubing, just try to make the path as short as possible, especially with CF filament.
        sigpic

        Comment

        • #5
          Scotty
          Senior Member
          • Dec 2005
          • 2164

          Originally posted by user120312
          Thanks OP and nice kit. In an abundance of caution I'll check the Prusa and Orcaslicer forums to see if and how this may or will affect air gapped machines of Prusa make. Part of the reason I settled on an air gapped machine with open source control was to keep fascists and Communists out of my business.

          If I may ask, what are you using to dry and store your engineering filaments, particularly the hygroscopic ones? Your prints look very nice. What's the relative humidity in your location?

          My print area RH varies from 60 to 65% pretty much all year, sometimes up around 70. That's hard on filament. I use dessicant but I think a more active approach is warranted. I was looking at the Sunlu i10 cabinet that will be out soon.

          TIA for any advice.
          The law is stupid and the 3D industry voiced their opinion during the open hearings. The machine is simply running a text file that is xyz coordinates. Open up your g code in a text viewer and you'll see. It would take a lot of processing power to be able to figure out what is being printed from the xyz coordinate. Majority of the 3D printers have an Arduino board running it.

          The slicing software is what takes the model and creates the g code. They can go after that, but that's pointless too. Prusa Slicer is based on Slic3r which is open source. You can still download every version back to when 3D printers were made out of laser cut plywood and all thread.

          Engineering filaments need to be dried prior to using. If you don't want to buy a filament dryer, you can bake the filament in an oven or use a food dehydrator. The datasheet will have temperature and time you need to bake the filament. That's what people did before commercially available drivers were available. After you dry it, put it in a stage container with a large desiccant pack. Then feed the filament through a hole in the container.

          Comment

          • #6
            user120312
            CGN/CGSSA Contributor
            CGN Contributor
            • Mar 2012
            • 8788

            What I've learned so far is that moisture sensitive filaments can degrade if subjected to wet/dry cycling over time, a particular concern with engineering filaments. By degrade I mean the polymer chains can degrade, affecting strength and ductility/rigidity. This may not be a problem when using large quantiies over short periods of time but I expect use in my non-commericial environment to be far more lengthy and sporadic.

            My solution would be to take fresh spools, dehydrate them, then store them in a low humidity maintained environment and only briefly remove them to dry boxes (a sealed unheated box with dessicant) and feed tubes/seals for feeding to the printer.

            I've started with a single head machine but it has the flexibility to add four to eight indexable heads in the future. The goal is a secure/dry/feed storage regime for at least two spools to be fed from and a larger regime for bulk storage.

            Regarding the other code and hardware and laws stuff, I'm a bit familiar since I owned a general machine shop for 35 years, though I'm not current on software engineering by any stretch. Our shop was completely air gapped so no CAD or machine tool codiing ever was incidentally exposed to the internet and programming was all by hard cable or thumb drive.

            I didn't do that because I wanted to break the law rather I don't like the direction the humans in the law have taken back 50 years ago so took steps to ensure our privacy and security from their kind. Not complicated and not going to change.

            Appreciate the advice and I look forward to seeing more of the OP's designs. My initial stuff will be more in gear loadout and night vision mounts and vintage and antique rifle accessories, with some rocketry and aerial designing thrown in. A return to the 60's fun that I had long before computers and 3D printers were part of my life.

            Comment

            • #7
              Scotty
              Senior Member
              • Dec 2005
              • 2164

              If you know you won't be using the filament for a while, get a food saver and vacuum bag the filament.

              Comment

              • #8
                morrcarr67
                I need a LIFE!!
                • Jul 2010
                • 15075

                Originally posted by user120312
                What I've learned so far is that moisture sensitive filaments can degrade if subjected to wet/dry cycling over time, a particular concern with engineering filaments. By degrade I mean the polymer chains can degrade, affecting strength and ductility/rigidity. This may not be a problem when using large quantiies over short periods of time but I expect use in my non-commericial environment to be far more lengthy and sporadic.

                My solution would be to take fresh spools, dehydrate them, then store them in a low humidity maintained environment and only briefly remove them to dry boxes (a sealed unheated box with dessicant) and feed tubes/seals for feeding to the printer.

                I've started with a single head machine but it has the flexibility to add four to eight indexable heads in the future. The goal is a secure/dry/feed storage regime for at least two spools to be fed from and a larger regime for bulk storage.

                Regarding the other code and hardware and laws stuff, I'm a bit familiar since I owned a general machine shop for 35 years, though I'm not current on software engineering by any stretch. Our shop was completely air gapped so no CAD or machine tool codiing ever was incidentally exposed to the internet and programming was all by hard cable or thumb drive.

                I didn't do that because I wanted to break the law rather I don't like the direction the humans in the law have taken back 50 years ago so took steps to ensure our privacy and security from their kind. Not complicated and not going to change.

                Appreciate the advice and I look forward to seeing more of the OP's designs. My initial stuff will be more in gear loadout and night vision mounts and vintage and antique rifle accessories, with some rocketry and aerial designing thrown in. A return to the 60's fun that I had long before computers and 3D printers were part of my life.
                Sorry for the late response to the dryer question above. Since there have already been some good suggestions, I'll just leave this for you. When I started I had a single head machine. I bought a dryer for the filament I was currently using. I then started using different filament and needed a different dryer. Now I'm getting into engineering filament, and guess what? I needed a new dryer. I currently have 3 dryers, 2 printers with single heads. But, I have a multi-color printer on its way and guess what, I'll need to get at least one more dryer. Do yourself a favor and buy multi-bay dryers that will dry whatever filament you MAY use in the future.

                As to the humidity in my part of OK, it's not too bad. In fact at times; like now, it gets pretty dry and we need to run a humidifier to reduce the amount of static electricity in the house. In my office; inside the house, where I do some printing it's about 50-55%. In my enclosed printer while printing, it drops down to about 17%. This is just from the heated bed and printhead as I don't have a chamber heater on this printer.

                In the garage; where I also do some printing, it can range from 35-70%. I don't have the garage climate controlled right now. I would like to add a mini split to it at some time though.

                Now, onto question in this post. I'm not sure about the degrading part, but you do need to store it properly. When you're not using your engineering grade filament you need to put it in a sealed bag with some desiccants in it. They sell zipper bags that can be reused and vacuum-sealed with a little hand held vacuum. Or you can use your Food Saver vacuum sealer, just keep in mind that you won't be able to reuse those bags.

                If you keep your engineering filament stored like this, you won't have to worry about going from wet to dry a bunch of times. You also won't need to dry it as long before printing. And speaking about printing, you will want to print your engineering filament directly from the dryer. All the dryers I have allow this. There is a hole in which you can thread your filament through. Depending on how far the filament will need to travel from the dryer to the PTFE tube of the printer will determine your setup. If it will only be in open air for a few inches, that would be okay. If it will be a foot or longer you may want to buy some PTFE tubing and use it to connect your dryer to your printer, that way it stays in a sealed environment for the whole time it's printing.

                Lastly, you'll need to anneal your prints. The size of your prints will determine the size of your annealing oven. For my needs, I can get away with a toaster-oven. If you can get away with a toaster-oven, make sure you get one with an always on feature. You don't want to have to keep going back to your toaster-oven and adding more time to the timer.
                Last edited by morrcarr67; 11-09-2026, 7:19 AM.
                Yes you can have 2 C&R 03 FFL's; 1 in California and 1 in a different state.

                Originally posted by Erion929

                Comment

                • #9
                  morrcarr67
                  I need a LIFE!!
                  • Jul 2010
                  • 15075

                  I printed up a couple of grips. One for this 10/22 build and one to fix my AR9. It was still in its CA compliant mode.

                  PXL_20261109_230445694.jpg

                  PXL_20261109_230929922~2.jpg

                  PXL_20261109_231237795.jpg
                  Attached Files
                  Yes you can have 2 C&R 03 FFL's; 1 in California and 1 in a different state.

                  Originally posted by Erion929

                  Comment

                  • #10
                    user120312
                    CGN/CGSSA Contributor
                    CGN Contributor
                    • Mar 2012
                    • 8788

                    A number of reviewers have given their opinions on the new H3C from Bambu and it looks to have solid potential for those interested in multi color and/or multi material printing from indexable heads and a head changer, including the soft filaments that sometimes struggle with the standard filament diameter. Nice move. Prices start at 2500 for the printer and dedicated AMS. Looks like it'll need a shorter surface to set it on to be practical. Pretty tall.

                    Thanks for the advice on the filament and drying.

                    I noticed a couple reviewers downgraded the H3C for the way its AMS handles filament since it can store 9 spools inside and the convenience of doing that would likely lead to users doing just that, storing filament in it. Two of the spaces have a separate cover and are heated but not the other seven. There is some room for a dessicant bag in what I believe was the tenth spot for a spool but lost to the lid support struts. Else, it's a mostly sealed box. Overall, it seemed there was agreement on it not being the best drying/dry setup as is for filaments that need that.

                    If a beginning user who was serious about getting into the work and believed in the Bambu style ecosystem and being 'connected', IMO great starter machine. Near the high end in price for consumer machines but very flexible, easy to grow into as one improves their skills and can provide good service for many years. I view the Bambu products as the iPhone/iPad ecosystem of printers. I'll never own one but respect what they turn out.

                    Comment

                    • #11
                      GOEX FFF
                      ☆ North Texas ☆
                      CGN Contributor
                      • Jun 2007
                      • 7759

                      Receiver looks great!

                      Just got our Son a printer for his B-Day this past June. He uses it way more than I do to make action figures and things.

                      But myself, so far firearm related stuff I've only printed on it are a few speed loaders, a Pmag that was OK (terrible spring) and these pretty cool 50rnd .22LR stackable slide boxes. Made the custom tracer lables for them, too.


                      20261007_174908.jpg

                      20261007_174918.jpg

                      20261007_174925.jpg

                      20261007_174959.jpg
                      Last edited by GOEX FFF; 11-12-2026, 9:46 PM.
                      Stand for the Flag - Kneel for the Cross

                      The 2nd Amendment Explained

                      Comment

                      • #12
                        C.G.
                        Calguns Addict
                        • Oct 2005
                        • 8259

                        Originally posted by user120312
                        A number of reviewers have given their opinions on the new H3C from Bambu and it looks to have solid potential for those interested in multi color and/or multi material printing from indexable heads and a head changer, including the soft filaments that sometimes struggle with the standard filament diameter. Nice move. Prices start at 2500 for the printer and dedicated AMS. Looks like it'll need a shorter surface to set it on to be practical. Pretty tall.

                        Thanks for the advice on the filament and drying.

                        I noticed a couple reviewers downgraded the H3C for the way its AMS handles filament since it can store 9 spools inside and the convenience of doing that would likely lead to users doing just that, storing filament in it. Two of the spaces have a separate cover and are heated but not the other seven. There is some room for a dessicant bag in what I believe was the tenth spot for a spool but lost to the lid support struts. Else, it's a mostly sealed box. Overall, it seemed there was agreement on it not being the best drying/dry setup as is for filaments that need that.

                        If a beginning user who was serious about getting into the work and believed in the Bambu style ecosystem and being 'connected', IMO great starter machine. Near the high end in price for consumer machines but very flexible, easy to grow into as one improves their skills and can provide good service for many years. I view the Bambu products as the iPhone/iPad ecosystem of printers. I'll never own one but respect what they turn out.
                        From my perspective it is overpriced and just like iPhone you are locked into their ecosystem.which is my main issue with Bambu.
                        sigpic

                        Comment

                        • #13
                          morrcarr67
                          I need a LIFE!!
                          • Jul 2010
                          • 15075

                          Originally posted by GOEX FFF
                          Receiver looks great!

                          Just got our Son a printer for his B-Day this past June. He uses it way more than I do to make action figures and things.

                          But myself, so far firearm related stuff I've only printed on it are a few speed loaders, a Pmag that was OK (terrible spring) and these pretty cool 50rnd .22LR stackable slide boxes. Made the custom tracer lables for them, too.


                          20261007_174908.jpg

                          20261007_174918.jpg

                          20261007_174925.jpg

                          20261007_174959.jpg
                          Nice, I want to print some 22lr ammo boxes too. I've just been busy print fun stuff vs useful stuff.
                          Yes you can have 2 C&R 03 FFL's; 1 in California and 1 in a different state.

                          Originally posted by Erion929

                          Comment

                          Working...
                          UA-8071174-1