Mobile AK flat bending services in socal up for offer. new price list/breakdown.

[ar15barrels]

Anyway here want I planning to do:
1. Bend one or two flats.
2. Press out barrell, rivet front trunion and press in barrel.
3. Have a bear.

Grizzly, Black or Polar?

[Sal]

Grizzly, Black or Polar?

haha!

anyway if you mean beer, cant drink sorry

#1 im 19, and underage

#2 I happen to be "allergic" to alcohol, i cant process it and get rid of it due to a blood/kidney/liver disorder, it will just stay in my system and i'll have to go through dialysis. Trust me my first time drinking was and forever will be my last.

[olegk]

Alrighty, in the desire to get as many AK's and AK pistols into CA as quickly and as cheaply as possible, I am going to be offering a mobile AK flat bending service.

*EDIT*

Price list breakdown

Here is a updated and itemized price list.

$20 for the first flat, use and instruction on the tools

$16 per each additional flat

$5 for heat treating(goes to new mapp gas can, salt, and dish soap)

$140 for a demilled Romy G kit

$100 to cut and turn a pistol kit from a parts kit

$20 for a rivet set, along with pressing in the barrel and riveting the trunions.

$0.15 a mile driven to and from

It will cost $20 to bend yourself a flat, that includes a 1mm enhanced flat and use and instruction of the bending jig and press. I have stamps to stamp the make, model, pistol, serial, and anything else you'd like to put on the receiver. I can also do heat treating on the spot for an extra $5 or so, but it is the most time consuming part of the bend.

I will drive within 50 miles of cerritos to do this, but will have to charge $0.15 a mile for gas.

So even if you are 50 miles away your only looking at $27.50 total, but any more will be accepted to further fund this endeavor so that i can actually keep more flats in hand, and pay for a few more tools that are needed to actually complete the flats, like a spot welder.

While i'm only going to get a maximum of $5 for my time from the flat, my main concern is bringing these into the the state, there will be strength in numbers. I Hope i can actually get enough interest in this so that i can pickup that spot welder, and at that point I will also be offering to finish the receivers completely on the spot including the heat treat and welding of the rails.

PM me if you are interested, I may also be able to supply a Romy G kit turned and cut down to pistol lenth, custom lengths to order, but payment would have to be in advance for the kit, or you can supply your own kit and i can cut and turn everything to make it a custom length. chances are it will be around $200-250 to do including a kit and a G2 trigger group + other parts that need to be bought and machine time for me.

PM me with any inquiries, we can set up a time and place and you can bend yourself a flat. I will also trade a flat and service for parts kits, i love to build things, but can hardly ever afford to buy anything.

Even if you decided to build youself a AK pistol including a kit done by me and a receiver you bent on my jig, you will have only spent $300 or so, which is cheap enough for most people to have an AK pistol that want one.

Sal,
Where are you?
I need your services!!!

[jonrx7]

Hi Sal

Please PM me I need some tooling and asssitance in assembling my project.
I'm in Torrance and OC.

John

[justinLB]

Sal, I've sent you a couple PM's, I need a flat or two.

[Wyseguy]

Sal,
I think I'm going to need your services. I'll PM you with what I'll need.

[MilanoRex]

This thread makes me really want to build one of these! I'll slowly start piecing together a kit

[03yz250]

Has anybody heard back from Sal?

[justinLB]

Sal, I got my Romy-g kits all demilled and ready to build. I just need your skills and experience to guide me now. I have a drill press, 12 ton press and ak-builder barrel installation/removal kit.
Please write me back if you have the time.
Thanks, Justin

[bigbob76]

AK flats bending

I want to bend some flats, are you still doing this?

[Sal]

I might still be doing it, not at the old prices, and I can no longer supply ANY kits at all.

I've also been a whole lot more busy lately so it would be alot more limited on times i could do it.

[aplinker]

1st in line

[bigbob76]

So when you have time Sal maybe I could do 2 flats at the same time if possible and find out what to do to get started on the barrels of my Romy G kits to build pistols. I'll work around whatever time you have. I know the flats are something I have to do myself but I'd like to hire you to do barrels etc. Did you ever do any more work on that Ruger? pm sent