P320

[shaunbowler@yahoo.com]

It has been @ a year since I took this apart, for regular maintenance.
Is there a web site that I can review cleaning protocols for my P320 ?

[shaunbowler@yahoo.com]

PS
No You Tube Videos. Living @ Ramah, NM. does not allow us stream.

[BajaJames83]

its really easy to take apart.
1) verify it is clear
2) lock back slide and rotate lever
3) remove slide
4) remove recoil spring assembly from slide/ barrel
5) remove barrel
6) clean, barrel, slide and RSA
thats all you need to do unless you want to get deeper.

Slide:
1) depress extractor plunger & push down slide cap
2) remove striker assembly
3) remove extractor, extractor plunger and spring
4) clean all parts
5) reassemble

FCG:
1) remove takedown lever from grip
2) remove FCG from grip
3) clean

[shaunbowler@yahoo.com]

That is EXACTLLY the information I need.
Thank You.
SB

[shaunbowler@yahoo.com]

I have finally got around to complete the maintenance on my P320. How do I disconnect the barrel from the "whatever." I have never worked on a "hammerless" firearm.

[morrcarr67]

I have finally got around to complete the maintenance on my P320. How do I disconnect the barrel from the "whatever." I have never worked on a "hammerless" firearm.

Not quite sure what you mean.

Did you get the slide assembly off the frame?

If so, it should be pretty easy to push the recoil guide assembly forward just a bit and then you can lift it up off of the barrel.

You can then remove the barrel by pushing it forward just a bit and lift it and remove it from the slide.

[shaunbowler@yahoo.com]

Got it. Thank You.