Unconfigured Ad Widget

Collapse

Does your SG mechanical dial ..... *SOLVED post 13*

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    Cuda440
    CGN Contributor
    • Sep 2010
    • 3289

    Originally posted by Metal Magic
    Well, I figured it out!
    Cuda was correct although, there was nothing pressing against the bolts inside the safe, the cam was causing friction on the deadbolt! What was happening was after locking the door I was spinning the handles all the way out (counter clockwise) till' they maxed out against the stop. This was causing binding as the deadbolt unlocked and retraced. By taking a slight amount of pressure off the deadbolt (slightly rotating the locked doors handles clockwise) it took enough pressure off the deadbolt so that it slides off the cam freely! It feels silky smooth now! After locking the door I just make sure the cam isn't fully maxed out closed and the problem is gone.

    Thanks for the help everyone but espically thanks to Cuda for the advice.
    Glad you got it worked out

    There might be an adjustable stop somewhere that could keep it from binding when you close it all the way, but just backing off the tension works fine as well
    Rightful liberty is unobstructed action according to our will within limits drawn around us by the equal rights of others. I do not add 'within the limits of the law' because law is often but the tyrant's will, and always so when it violates the rights of the individual.

    Thomas Jefferson

    Comment

    Working...
    UA-8071174-1