Unconfigured Ad Widget

Collapse

Does your SG mechanical dial ..... *SOLVED post 13*

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Metal Magic
    Senior Member
    • Jan 2011
    • 803

    Does your SG mechanical dial ..... *SOLVED post 13*

    Get really hard to turn on the last number? I have a new browning safe and the last motion (that lifts the cam) feels like it's getting hard to spin. Some times it's smooth but recently it's becoming more difficult. I can really feel the mechanism struggling to unlatch .....

    Any input?
    Last edited by Metal Magic; 08-18-2017, 4:53 PM.
  • #2
    rcslotcar
    Senior Member
    • Jul 2014
    • 1100

    My Fort Knox has been hard to turn on the last number for 20+ years, but has never failed to open.

    Comment

    • #3
      AceGirlsHusband
      Veteran Member
      • Jan 2013
      • 2651

      Mine's always been smooth as silk (12 years now).

      Comment

      • #4
        Metal Magic
        Senior Member
        • Jan 2011
        • 803

        Interesting, I asked the guy at the shop where I bought the safe it is normal and he said I should "call Browning"

        It's funny that a shop with 35 safes has every one with an electric lock

        Comment

        • #5
          The Shootist
          Senior Member
          • May 2010
          • 1796

          Mine is only about 5 years old but is smooth as can be.....it doesn't seem normal to me but I'm definitely not an expert
          NRA ENDOWMENT LIFE MEMBER
          CRPA MEMBER
          FIREARMS POLICY COALITION MEMBER
          CGN CONTRIBUTOR

          Comment

          • #6
            Cuda440
            CGN Contributor
            • Sep 2010
            • 3289

            My bet is that theres something in the safe pushing against one of the bolts when its closed. Try holding the safe handle tightly closed when you turn the dial to the last number and see if the resistance is gone
            Rightful liberty is unobstructed action according to our will within limits drawn around us by the equal rights of others. I do not add 'within the limits of the law' because law is often but the tyrant's will, and always so when it violates the rights of the individual.

            Thomas Jefferson

            Comment

            • #7
              Baggs
              Member
              • Jul 2014
              • 126

              My Browning safe-circa mid 80's-has a noticeable drag when I'm about 8 numbers away from the last one...been like that since day one.

              Comment

              • #8
                metalman4051
                Member
                • Oct 2013
                • 193

                My SG lock stiffens to the point of becoming jerky on the first number, not last. Then the rest of the numbers are smooth. Annoying, but never fails to function.
                "I cherish all the freedoms we have, including the freedom and the right to burn the flag. But I also have the right to bear arms, and if you burn mine I'll shoot ya." -- Johnny Cash

                Comment

                • #9
                  Puckinhead
                  Member
                  • Feb 2009
                  • 112

                  Originally posted by Cuda440
                  My bet is that theres something in the safe pushing against one of the bolts when its closed. Try holding the safe handle tightly closed when you turn the dial to the last number and see if the resistance is gone
                  Not the problem! The lock does not turn the bolts that hold the door closed. The handle does that. OP my S&G lock has done the same thing for ever and never fails to open.

                  Comment

                  • #10
                    T6pilot
                    Member
                    • Dec 2013
                    • 354

                    Same with my 30 year old Sportsman's safe, 5-6 numbers before last number feel some resistance,
                    No issue opening though

                    Comment

                    • #11
                      Cuda440
                      CGN Contributor
                      • Sep 2010
                      • 3289

                      Originally posted by Puckinhead
                      Not the problem! The lock does not turn the bolts that hold the door closed. The handle does that. OP my S&G lock has done the same thing for ever and never fails to open.
                      Have you ever looked at the mechanism inside the door?

                      Yes the handle moves the bolts, it has a metal plate with a notch that lines up with the lock's deadbolt when the handle is closed. When you open the lock, the deadbolt retracts from the notch and the handle is free to turn.

                      If theres any pressure against the bolts, that notch will press sideways against the lock's deadbolt, making it hard for the deadbolt to retract.

                      Here's a few examples, you can see the notch the deadbolt drops into. If theres pressure against the bolt because the door mechanism is pushing againstg it, the deadbolt becomes very hard to move.


                      Rightful liberty is unobstructed action according to our will within limits drawn around us by the equal rights of others. I do not add 'within the limits of the law' because law is often but the tyrant's will, and always so when it violates the rights of the individual.

                      Thomas Jefferson

                      Comment

                      • #12
                        JDay
                        I need a LIFE!!
                        • Nov 2008
                        • 19393

                        Mine only gets stiff when I turn it to the right to unlock after the last number.

                        Sent from my LG-H910 using Tapatalk
                        Oppressors can tyrannize only when they achieve a standing army, an enslaved press, and a disarmed populace. -- James Madison

                        The Constitution shall never be construed to authorize Congress to prevent the people of the United States, who are peaceable citizens, from keeping their own arms. -- Samuel Adams, Debates and Proceedings in the Convention of the Commonwealth of Massachusetts, 86-87 (Pearce and Hale, eds., Boston, 1850)

                        Comment

                        • #13
                          Metal Magic
                          Senior Member
                          • Jan 2011
                          • 803

                          Well, I figured it out!
                          Cuda was correct although, there was nothing pressing against the bolts inside the safe, the cam was causing friction on the deadbolt! What was happening was after locking the door I was spinning the handles all the way out (counter clockwise) till' they maxed out against the stop. This was causing binding as the deadbolt unlocked and retraced. By taking a slight amount of pressure off the deadbolt (slightly rotating the locked doors handles clockwise) it took enough pressure off the deadbolt so that it slides off the cam freely! It feels silky smooth now! After locking the door I just make sure the cam isn't fully maxed out closed and the problem is gone.

                          Thanks for the help everyone but espically thanks to Cuda for the advice.

                          Comment

                          • #14
                            The Shootist
                            Senior Member
                            • May 2010
                            • 1796

                            Way to see it through and fix it! Now go have a beer and call it a day....glad you solved it
                            NRA ENDOWMENT LIFE MEMBER
                            CRPA MEMBER
                            FIREARMS POLICY COALITION MEMBER
                            CGN CONTRIBUTOR

                            Comment

                            • #15
                              sigstroker
                              I need a LIFE!!
                              • Jan 2009
                              • 19993

                              Originally posted by Metal Magic
                              Interesting, I asked the guy at the shop where I bought the safe it is normal and he said I should "call Browning"

                              It's funny that a shop with 35 safes has every one with an electric lock
                              At least you don't have to worry about an EMP.

                              Comment

                              Working...
                              UA-8071174-1