Going to sip some AR kool-aid

[wpod]

Got an 80% AR lower receiver. Got a lower parts kit. EZ jig with bits and mill is on the way. Have a drill press and cutting oil. Will get a router.

Question 1.
Am I still in need of:
- punches. GOT EM
- AR wrench
- mag well block? GOT IT holds upper too
Any other tools?

Question 2
If I go with a complete, dedicated rimfire upper (some flavor of. 17 or .22) I can have detachable mags, normal mag release, and the evil features?

It will be marked per ATF regulations.

Thanks for all the help.

Sent from my SM-N910V using Tapatalk

[Quiet]

Got an 80% AR lower receiver. Got a lower parts kit. EZ jig with bits and mill is on the way. Have a drill press and cutting oil. Will get a router.

Question 2
If I go with a complete, dedicated rimfire upper (some flavor of. 17 or .22) I can have detachable mags, normal mag release, and the evil features?

It will be marked per ATF regulations.

Thanks for all the help.

If built as a semi-auto rimfire rifle, then the only restrictions that you need to be concerned with is having a minimum barrel length of 16" and a minimum overall length of 26".
There are no other restricted features for a rimfire rifle.

If built as a rimfire pistol, then it must be made as a dimensionally compliant bolt-action or break-top/open single-shot pistol.
It must have a minimum barrel length of 6", must have a minimum overall length of 10.5", must operate as a bolt-action or a break-open, must not have a magazine capacity, and can never have been semi-auto.

[wpod]

If built as a semi-auto rimfire rifle, then the only restrictions that you need to be concerned with is having a minimum barrel length of 16" and a minimum overall length of 26".
There are no other restricted features for a rimfire rifle.

If built as a rimfire pistol, then it must be made as a dimensionally compliant bolt-action or break-top/open single-shot pistol.
It must have a minimum barrel length of 6", must have a minimum overall length of 10.5", must operate as a bolt-action or a break-open, must not have a magazine capacity, and can never have been semi-auto.

Great. That helps.
(Never considered a pistol... hmm)

Sent from my SM-N910V using Tapatalk

[wpod]

Intended purpose (someone will ask) is a plinking, range toy. Maybe go after squirrels at the ranch (my daughters 10/22 is perfect for this).
Mostly, I just like making things. An 80% is perfect for this.

Sent from my SM-N910V using Tapatalk

[CWDraco]

You really dont need an AR wrench unless you are going with a standard Delta ring assembly. If you are going with a Free Float aftermarket rail, they use their own wrenches.

Diamondhead Rails use common 1.25" wrenches, or 12" Cresent Wrenches that open to 1.25".

[SPC G]

You also need bullets

[wpod]

Bullets or cartridges?

Sent from my SM-N910V using Tapatalk

[wpod]

Question 3
Which do you prefer and why,
- co-witness
or
- 1/3 co-witness

Sent from my SM-N910V using Tapatalk

[HardwoodRods]

Bullets or cartridges?

Sent from my SM-N910V using Tapatalk

And don't forget clips

[HardwoodRods]

Question 3
Which do you prefer and why,
- co-witness
or
- 1/3 co-witness

Sent from my SM-N910V using Tapatalk

I for one don't want any witnesses......

[wpod]

And don't forget clips

I've got hundreds of clips

Sent from my SM-N910V using Tapatalk

[Cody805]

I for one don't want any witnesses......

Yep that's a bust

[wpod]

Yep that's a bust

It's CA.
I need a witness to prove my innocence

Sent from my SM-N910V using Tapatalk

[HardwoodRods]

It's CA.
I need a witness to prove my innocence

Sent from my SM-N910V using Tapatalk

it's CA, you have guns, your guilty

[HardwoodRods]

I've got hundreds of clips

Sent from my SM-N910V using Tapatalk

Cool, Mullet? or Man Bun?