Unconfigured Ad Widget

Collapse

590A1

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    Databyter
    Senior Member
    • Dec 2010
    • 1100

    Originally posted by RGERBER
    Ok, thanks – I have several shotguns 500A is one of them, I do not need to choke the 590A1 I just bought it. I guy at our range shoots skeet so I thought if I could just stick a $ 30.00 dollar choke in it, and remove it when I got home, I could do skeet with it better, I have shot those skeet with my 18” 500 so I know I can do it with my 20” 590A1 – I need to go get 9 pumpkins, 9 shells of 9 shot pellets in the tube.
    That’s my 999 plan
    Thanks for the replies.
    It's a good idea that I also thought of a while back. But you would need to have your 20" barrel threaded to accept tubes. There are some relatively inexpensive but quality shops that can do this for you and the 590-A1 has plenty of meat to work with barrel thickness wise so it is definitly doable.

    The reason I am backing away from doing it with mine now is that I expect to be doing quite a bit of slug shooting and I'm not sure how that Mod might effect slug accuracy, or how the tubes, even a neutral one, would hold up to massive slug shooting.

    For your purposes however I give you this link. When I was looking at having this done I always ended up on this site.

    Shotgun choke tubes, installation in 12 20 28ga .410 bore. Screw In Choke. Standarad and thin-wall systems, Barrel porting, gunfitting, recoil pad installation, lengthening, polishing long forcing cones, chamber and head spacing work. Custom gunfitting and refinishing. Pads and sights, Bob Day, Shotgun Modifications, R&D Custom Barrel, Americhoke


    Obviously the nay sayers will say to get a custom gun for each purpose, but there is nothing wrong with making an HD weapon more versatle. I wouldn't worry about resale values. Who is going to sell their 590-A1. I scoff at the idea. And if you did it could actually bump the price if it was done well.
    Last edited by Databyter; 11-13-2011, 3:47 PM.

    Comment

    • #17
      WmWhitfield
      Member
      • Sep 2011
      • 483

      The right choke (no more than modified) will improve slug accuracy. There is such a thing as a rifled choke for slugs, but I don't know about them. The thing with swapping barrels is they lugs have to be in the same place and they are futther from the receiver on extended capacity guns. Some Maverick barrels will fit the 590. I think an unchoked open cylinder would work pretty good for skeet but not for trap.

      Comment

      • #18
        RGERBER
        Senior Member
        CGN Contributor
        • Dec 2009
        • 579

        i was just thinking screw on and off, no big, i shot skeet today , did just fine the way it is

        Comment

        • #19
          Richard Erichsen
          Senior Member
          CGN Contributor
          • Jan 2011
          • 1911

          Originally posted by Mossy Man
          You'd have to have a Smith thread it. Also there are NO barrel options for the 590 series. If you want chokes, get a 500
          Maybe not quite "none" but certainly not near what you see for the 500. I think I counted 6 for the 590 in the catalog, but they cost enough you'd almost be better off buying a whole new shotgun than just the barrel (they run $140-160 each!).

          R
          Mangler of loose parts into modernized boom sticks

          "Your breathing should be slow and steady. It should sound like HEE HEE HOOOOOOOOooooooo!!!" - CBruce

          Comment

          • #20
            Richard Erichsen
            Senior Member
            CGN Contributor
            • Jan 2011
            • 1911

            Originally posted by RGERBER
            anyone here know if you can put a acu choke or similar on a 590A1?
            What do you plan to do with this shotgun? At the typical HD distances (3-7 yards) a cylinder bore is all you need. At 15-25 yards, cheaper shells will tend to open up - but the Federal shells with the Flight Control wad will group well in most shotgun barrels - better than most in any case and still not really need a choke.

            If you want to extend your reach a bit and keep a tight pattern, you might be compelled to consider an improved or modified choke, but you can use a smooth faced type that is soldered in, rather than threaded type chokes. This will be cheaper and can even be done on barrels a lot thinner walled than the 590A1. I wouldn't go beyond a modified choke for general purpose/mostly HD use and improved might be the better choice for ranges under 15 yards. Much further than that and it's probably not "HD" use anymore, which is what this whole series of models is designed for.

            R
            Mangler of loose parts into modernized boom sticks

            "Your breathing should be slow and steady. It should sound like HEE HEE HOOOOOOOOooooooo!!!" - CBruce

            Comment

            • #21
              Richard Erichsen
              Senior Member
              CGN Contributor
              • Jan 2011
              • 1911

              Originally posted by DavidR310
              for the price of gunsmithing & the loss of resale value on the 590A1 ( which is an awesome shotgun), your better off getting a field maverick 88 for less than 200 bucks.



              Resale value on a shotgun that costs $300-350 street price shouldn't really be a consideration. These aren't collector pieces and they don't improve with age or use. Do what you want to the thing (as long as its sane), it's a utilitarian model after all. There are far more atrocious things to do to shotguns than fitting a choke on a cylinder bore for specific applications.

              Drilling holes in the side of the receiver for a side saddle is always cause for concern with me, since some folks don't pay any special attention to what they are drilling into, the angle of the hole, or the quality of the threads. Crossthreaded stock screws are another pet peeve that occur far too often, as are internally rusted mag tubes that never saw a single pass of a cleaning brush or a tiny droplet of oil.

              Because the initial price is low, most folks don't lavish any great attention on their shotguns. If you can walk away after a few years and get $200 and a couple 100 shell bargain hunter specials from Wally World, you probably got the better end of the deal.

              R
              Mangler of loose parts into modernized boom sticks

              "Your breathing should be slow and steady. It should sound like HEE HEE HOOOOOOOOooooooo!!!" - CBruce

              Comment

              • #22
                Richard Erichsen
                Senior Member
                CGN Contributor
                • Jan 2011
                • 1911

                Originally posted by j.primo
                The 835 barrels will only work on the 18" 590 shotguns because the lug/ring is in the same spot. The 20" 590 has a lug/ring at the end and another one where the bayonet lug is.
                Yep - its the mag length that determines the barrel you can use. 18-inchers are 6 shot mag tubes, 20-inchers are 8 shot tubes.

                R
                Mangler of loose parts into modernized boom sticks

                "Your breathing should be slow and steady. It should sound like HEE HEE HOOOOOOOOooooooo!!!" - CBruce

                Comment

                • #23
                  Databyter
                  Senior Member
                  • Dec 2010
                  • 1100

                  Originally posted by WmWhitfield
                  The right choke (no more than modified) will improve slug accuracy. There is such a thing as a rifled choke for slugs, but I don't know about them. The thing with swapping barrels is they lugs have to be in the same place and they are futther from the receiver on extended capacity guns. Some Maverick barrels will fit the 590. I think an unchoked open cylinder would work pretty good for skeet but not for trap.
                  I agree with most of what you said. I don't know about the maverick barrels.

                  As far as the chokes improving accuracy with slugs I can't say it makes sense to me with a short cylinder barrel and I've heard negative comments about the rifled chokes with sabot slugs.

                  I'm still open minded about this and learning but the primary use of slugs in my gun was enough to stop me for now.

                  I'd like to hear more opinions on this matter because like the OP I think it would be fun from a plinking and practice standpoint to have the choice of a slightly tighter more long range choke capability. I know this is not a hunting gun, but I don't see why we should be banned from having training choices that can only make us better shots as we have fun and compete with friends. Skeet seems doable by most recent posts I've heard though. And that's good enough for me for now.
                  Last edited by Databyter; 11-13-2011, 8:28 PM.

                  Comment

                  Working...
                  UA-8071174-1