Shotgun short-term rust-free storage options?

[Wombats Are Dangerous]

Ok, so I actually revived a dead thread in "General Gun Discussion" about this, but I wanted to ask you hardcore shotgun guys the same question, especially those of you that live in coastal areas where we get fog and salty humidity.

If this is a Calguns taboo, please let me know and I'll delete this post.

So, I don't have an airtight safe to store my shotguns. They're kept in a padlocked steel locker and each gun is stored in its own nylon carry case (standard Allen soft cases). If I was storing them for long term, I would grease them all up with Rig grease and be done with it, but so far, I'm shooting them about twice a month, so I need a clean, fast and cheap rust prevention solution.

Does anyone use silicon gun socks for their shotgun storage? Do silicon gun socks improve rust prevention? If so, would it be better to store each gun in a sock and outside of their nylon soft cases?

Any issues if I store each gun in a sock then INSIDE their soft cases? And then also add a dessicant in the case?

I've tried dessicants, but no amount of dessicant will keep the locker dry for more than two weeks at a time. I have to recharge these dessicants a LOT.

Here's the other thread specifically about gun socks, in case anyone was wondering:

http://www.calguns.net/calgunforum/showthread.php?t=205428

[thenodnarb]

Gun sock was my first thought. Generally, if you use an oil on it, it will displace moisture and keep it from rusting. Just use your gun cleaning oil of choice once every six months or so to keep it rust free.

[TheExpertish]

Gun sock was my first thought. Generally, if you use an oil on it, it will displace moisture and keep it from rusting. Just use your gun cleaning oil of choice once every six months or so to keep it rust free.

+1 for gun sock. Silicon in them are natural rust inhibitors. I have to say that if you're only seeing them 2 months in between that should be enough with a good oiling. Soft cases even with dessicant is not a good idea. If they get any moisture they'll hold it right against the gun.

[Richard Erichsen]

Ok, so I actually revived a dead thread in "General Gun Discussion" about this, but I wanted to ask you hardcore shotgun guys the same question, especially those of you that live in coastal areas where we get fog and salty humidity.

If this is a Calguns taboo, please let me know and I'll delete this post.

So, I don't have an airtight safe to store my shotguns. They're kept in a padlocked steel locker and each gun is stored in its own nylon carry case (standard Allen soft cases). If I was storing them for long term, I would grease them all up with Rig grease and be done with it, but so far, I'm shooting them about twice a month, so I need a clean, fast and cheap rust prevention solution.

Does anyone use silicon gun socks for their shotgun storage? Do silicon gun socks improve rust prevention? If so, would it be better to store each gun in a sock and outside of their nylon soft cases?

Any issues if I store each gun in a sock then INSIDE their soft cases? And then also add a dessicant in the case?

I've tried dessicants, but no amount of dessicant will keep the locker dry for more than two weeks at a time. I have to recharge these dessicants a LOT.

Here's the other thread specifically about gun socks, in case anyone was wondering:
http://www.calguns.net/calgunforum/s...d.php?t=205428

I don't know what this "sock" business is, but clean the weapon, oil it so that it has a light protective sheen of oil visible, throw several silica gel packs into the bag, get out as much air as you can then seal the bag. The best way to seal is with heat, rubber bands and such do not provide a sufficiently air tight seal. You can generally leave them in this state for several years if you are in a relatively low humidity domicile.

R

[TheExpertish]

I don't know what this "sock" business is, but clean the weapon, oil it so that it has a light protective sheen of oil visible, throw several silica gel packs into the bag, get out as much air as you can then seal the bag. The best way to seal is with heat, rubber bands and such do not provide a sufficiently air tight seal. You can generally leave them in this state for several years if you are in a relatively low humidity domicile.

R

The OP did note that humidity was an issue.

...I've tried dessicants, but no amount of dessicant will keep the locker dry for more than two weeks at a time. I have to recharge these dessicants a LOT.

In this instance I would highly recommend against sealing anything in a bag.

[kmca]

You really shouldn't store your guns in the nylon carrying case. The foam protection absorbs moisture that could lead to worse rusting then if you did nothing.

[Newshooter]

I agree with kmca.

The nylon case is probably the worst thing you can do. I would use the gun sock. Have you thought of putting a dry rod (or two) in the locker? I have two in my safe and it keeps it nice, dry and toasty.

[Wombats Are Dangerous]

You really shouldn't store your guns in the nylon carrying case. The foam protection absorbs moisture that could lead to worse rusting then if you did nothing.

Thanks for all the advice, guys (and gals, if any)!

I bought two Sack-Ups today to try them out. Going to stick a shotgun in each and see how they do over the next few months.

I also found that these socks are big enough to drop a small desiccant packet into. I'm going to put the desiccant into a Ziploc sandwich baggie and drop it in the sock as well.

Wish my guns luck!

[bh6300]

You can also buy Silicon spray from Ace Hardware store to re-apply silicon for your gun sock. They do dry out.

Its called "CRC" FOOD GRADE SILICONE.

[TheExpertish]

...I also found that these socks are big enough to drop a small desiccant packet into. I'm going to put the desiccant into a Ziploc sandwich baggie and drop it in the sock as well.

I would recommend against that. Keep in mind the purpose of desiccant is to ATTRACT water and keep it away/off items you are storing. Putting what is essentially a water attractant right next to the items you are trying to protect is a bad idea. Plus the socks are meant to breathe so they wouldn't do much good anyway.

[XYZ]

I bought two Sack-Ups today to try them out. Going to stick a shotgun in each and see how they do over the next few months.
!

Where did you purchase these? I'm looking to purchase a couple as well.

[LBDamned]

I spray Birchwood Casey SHEATH (rust prohibitive) on all my guns after I clean them... also wipe with silicone cloth... never had any rust issues...

I used to keep rifles in silicone gun sock - but it's a burden to get in & out (for long term it would be okay)... I keep my shotguns in an open end scabbard (but I want quick access to them if needed).

[Wombats Are Dangerous]

Where did you purchase these? I'm looking to purchase a couple as well.

I grabbed two at a local range on my way out. They were expensive at $11 each.

Then I searched Midway and found a six-pack on sale today for $21!

http://www.midwayusa.com/Product/939460228/midwayusa-gun-sock-rifle-silicone-treated-polyester-blend-gray-with-black-logo-52

Be forewarned though. You'll pay through the nose for shipping at Midway.

[BigFatGuy]

I've seen silicon gun socks on Amazon. There's a good chance at least one of them is prime-eligible, and that's free through the Amazon Student and Amazon Mom programs.