Unconfigured Ad Widget

Collapse

O/U Chokes ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • goldduster
    CGN/CGSSA Contributor
    CGN Contributor
    • Jun 2009
    • 161

    O/U Chokes ?

    Hi, I am a Noobe and have just put a very inexpensive O/U in jail (Maverick). Have noticed that they seem to come with an IC and M choke. Also, this one doesn't seem to have a selector for which barrel is first. Could anyone explain why the difference, whats best and which barrel is/should be first? Thanks!
  • #2
    otteray
    Veteran Member
    • Feb 2006
    • 3250

    Well, for bird huntin', you'd want the more open pattern for closer shots so you don't blow the critter to smithereens, and use the tighter choke pattern for shots that are farther out, so that there is still a decent pattern for killing.
    The bottom barrel has less muzzle jump; so that may keep you aligned for the following shot.
    sigpic
    Single fin mentality

    Comment

    • #3
      Coyotegunner
      Senior Member
      • Jan 2011
      • 1353

      Ditto for otteray

      Comment

      • #4
        infidel308
        Junior Member
        • Oct 2011
        • 55

        This IC (improved cylinder) is the wider pattern and should go first when your first shot will be closer. The M (modified) choke is a tighter pattern for those longer shots. It depends on for what purpose you will be using your shotgun.

        Comment

        • #5
          Fjold
          I need a LIFE!!
          • Oct 2005
          • 23093

          If you are shooting incoming birds like dove, then you want to shoot the modifed barrel first, then the improved barrel.

          If you're shooting outgoing birds, like quail, reverse that.
          Last edited by Fjold; 10-23-2011, 3:57 PM.
          Frank

          One rifle, one planet, Holland's 375




          Life Member NRA, CRPA and SAF

          Comment

          • #6
            Bedpan Bandit
            Member
            • Apr 2009
            • 416

            What are you primarily going to use the gun for? If skeet, the wider the better...Cylinder, Improved Cylinder,Skeet. Trap, tighter, from modified to full. If you shoot steel, the pattern will be tighter. FYI, they benelli/beretta chokes are compatible with the Mavericks if you are looking to get some extended chokes.

            There are lots of opinions about which barrel should go first. Most say that the bottom barrel first is best as the recoil goes straight back making it easier to recover to make the second shot. In addition, the top barrel will act as a heat sink to help cool the gun faster. I prefer the top barrel if I shoot Trap singles since I don't need a follow up shot. All depends on what you do better with.
            Wise is the man, who in quiet times, keeps his knives sharp and close at hand.
            ~Lao Tzu~

            Comment

            • #7
              goldduster
              CGN/CGSSA Contributor
              CGN Contributor
              • Jun 2009
              • 161

              Thanks, using for trap, maybe skeet later. No intention of hunting. After checking some more, find that there is a selector switch for the barrels.

              Comment

              • #8
                Bedpan Bandit
                Member
                • Apr 2009
                • 416

                For trap, start with modified. If you are shooting at the Pacific Rod and Gun and using steel, the modified will shoot like a full as steel shoots faster/tighter. When I use my cynergy, the skeet choke is tight enough for trap when I shoot steel.
                Wise is the man, who in quiet times, keeps his knives sharp and close at hand.
                ~Lao Tzu~

                Comment

                • #9
                  goldduster
                  CGN/CGSSA Contributor
                  CGN Contributor
                  • Jun 2009
                  • 161

                  Little confused, I thought the IC was wider than modified. On trap wouldn't I use the wider one close and the tighter one farther? Is skeet choke the same as IC and what is the benefit of extended chokes, the ones with it are in the barrel? Also while we're talking, what is the benefit of a chromed bore, or is it just hiding imperfections?

                  Comment

                  • #10
                    Bedpan Bandit
                    Member
                    • Apr 2009
                    • 416

                    IC is wider than Modified. In trap, you want to be able to get your shot out further so you use a tighter choke. Skeet is wider than IC by just a little bit. Again, when you use steel shot, the pattern will be tighter. Steel is faster so the pellets stay close together longer, only spreading out at further distances. Lead is slower and it opens up faster. Chokes typically are based on lead shot. Simple rule of thumb is when shooting steel, go up one level. For example, if you use IC while shooting steel, it patterns like M. If you use M, it will pattern like Full.

                    Never really shot trap doubles, but theoretically the wider choke would be better for the closer clay. This definitely is the thinking in skeet where folks have different combinations for the doubles. Someone who shoots trap doubles can give you a better idea of what works.

                    Extended chokes are just easier to change without a choke wrench.

                    Chromed bores are easier to clean.
                    Wise is the man, who in quiet times, keeps his knives sharp and close at hand.
                    ~Lao Tzu~

                    Comment

                    • #11
                      goldduster
                      CGN/CGSSA Contributor
                      CGN Contributor
                      • Jun 2009
                      • 161

                      Thanks Guys this is a big help. Now all I have to do is learn how to hit the singles. LOL

                      Comment

                      • #12
                        bjl333
                        C3 Contributor
                        CGN Contributor - Lifetime
                        • Dec 2009
                        • 7010

                        Originally posted by goldduster
                        Little confused, I thought the IC was wider than modified. On trap wouldn't I use the wider one close and the tighter one farther? Is skeet choke the same as IC and what is the benefit of extended chokes, the ones with it are in the barrel? Also while we're talking, what is the benefit of a chromed bore, or is it just hiding imperfections?
                        You are correct!! Skeet > IC > Mod > Full ...

                        The benifit of an extended choke tube is the longer length to gradually chokes the shot. As oppose to a shorter choke tube which has to choke the shot in a shorter length!! and for Sporting Clays guys it is easier to change them out!

                        A chrome bore will have better corrosion properties.

                        The above reference was made because the shooter is shooting steel shot. The reason you can use a wider choke for steel is because steel don't compress! So a little choke is good enough to "choke" the steel shots. With lead shot, they are softer and there for "gives" more, so lead requires a tighter choke to throw the same pattern as steel shot. Also because of the nonforgiving nature of steel shots, I would recommand against shoot steel shot in earlier choked shotguns not rated for steel shots!

                        I hope this all made sense!
                        Wanna learn to shoot SKEET? I am here to introduce all shooters to the sport of SKEET Shooting ....
                        CLICK HERE TO FIND OUT >>> SoCal Skeet Clinic
                        SKEET SHOOTING CLINIC
                        sigpic

                        Comment

                        • #13
                          goldduster
                          CGN/CGSSA Contributor
                          CGN Contributor
                          • Jun 2009
                          • 161

                          Therefore, would a skeet choke be to much for skeet when you use steel shot?

                          Comment

                          • #14
                            Bedpan Bandit
                            Member
                            • Apr 2009
                            • 416

                            Originally posted by goldduster
                            Therefore, would a skeet choke be to much for skeet when you use steel shot?
                            Depends on the gun. The skeet choke for my cynergy is tight enough to shoot trap. The diana grade invector plus chokes are just made tighter so I have to use the cylinder for skeet. On my benellis and lanber, the skeet choke is just right even with steel shot. It also depends on what type of ammo you use. You got to see what chokes/ammo works well with your gun.
                            Wise is the man, who in quiet times, keeps his knives sharp and close at hand.
                            ~Lao Tzu~

                            Comment

                            • #15
                              bjl333
                              C3 Contributor
                              CGN Contributor - Lifetime
                              • Dec 2009
                              • 7010

                              Originally posted by goldduster
                              Therefore, would a skeet choke be to much for skeet when you use steel shot?
                              Meh! With a 12ga you can pretty much use IC/lead and still be ok. So SKT/steel should be good.
                              Wanna learn to shoot SKEET? I am here to introduce all shooters to the sport of SKEET Shooting ....
                              CLICK HERE TO FIND OUT >>> SoCal Skeet Clinic
                              SKEET SHOOTING CLINIC
                              sigpic

                              Comment

                              Working...
                              UA-8071174-1