Unconfigured Ad Widget

Collapse

Mossberg 500 owner here

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SpectreZ91
    Member
    • Apr 2011
    • 160

    Mossberg 500 owner here

    So.. I purchased my 500a years ago cause I was moving into a bad neighborhood. Took it out claying shooting a whole bunch of times, but never really put any accesories on it..

    On Monday I decided to purchase a 9mm and while I'm waiting for it I realize my 12 gauge needs some attention.. So I decided to buy it a little kit for it..

    I ordered it today and should have it on Tuesday.. It should make me feel like I'm not neglecting the old girl.

    Here's what I got for it..

  • #2
    MrOrange
    Senior Member
    • Aug 2006
    • 2262

    That stock should make it a royal pain to get to the safety, if you care about such things.

    I know I'm a bit off, but I like the idea of using a blue (anodized) and wood shotgun for home defense. One rigged up tactical just looks scary! On that note, be sure to repost with the kit installed.
    I meant, it is my opinion that...






    I do believe that where there is a choice only between cowardice and violence
    I would advise violence. - M. Gandhi
    You're my kind of stupid. - M. Reynolds

    Comment

    • #3
      SpectreZ91
      Member
      • Apr 2011
      • 160

      I'll see how the saftey works out after I install the kit. I'm going to try and have a cam here so I can take pics of the tear down and install..

      I really need to clean it.. I've completely neglected it.. That being said I'm going outside now to repair my fence because of the wind damage from a tree branch falling. Should only take me 30 ish minutes.. Then I'm bringing the 12g out and will clean it with the cleaning kit I got today

      Comment

      • #4
        bruceflinch
        I need a LIFE!!
        • Jan 2006
        • 40141

        Take a Before & After Pic!
        Actually I only started collecting Milsurps 3 years ago. I think I might own about 24...They're cheaper than guns that will most likely never get the opportunity to kill somebody...

        I belong to the group that uses firearms, and knows which bathroom to use.

        Tis better to have Trolled & lost, Than to never have Trolled, at all.

        Secret Club Member?.

        Comment

        • #5
          prc77
          Veteran Member
          • Dec 2008
          • 2578

          I see that 3 round side saddle above the grip will be in the way. The cheese grater forend (wear a glove) If you use the forward mounted grip make sure when you cycle the pump you don't torque to the right or left. Could easily bend the action guide rods. Too much leverage.

          Keep all of your original parts. Dollars to donuts, they will find there way back on your shotgun.
          C Co. 509th ABN/PFDR
          83-85

          USPSA CRO
          MEMBER: USPSA, GSSF, Richmond Rod & Gun, Sunnyvale Rod & Gun


          sigpic

          Comment

          • #6
            bsg
            I need a LIFE!!
            • Jan 2009
            • 25954

            imo it would be a good thing to rethink the modifications you have purchased... before installation; see comments already made in thread.

            Comment

            • #7
              MaHoTex
              Calguns Addict
              • Jul 2010
              • 5002

              The above comments, specifically the cheese grater comment, was exactly my concern when I was looking at foregrips for my new Mossberg 500. Though maybe not functional, it will look cool.
              NRA Life Member

              sigpic

              Mr. President, I can't take any more winning! Make it stop Mr. President. The winning is YUGGEEEE!

              "If you've got a problem with the US, you better make sure it's not a military problem." SSgt Leslie Edwards

              Comment

              • #8
                Dutch3
                I need a LIFE!!
                • Oct 2010
                • 14181

                I have owned my 500 (actually a Coast-to-Coast Hardware 660) for about 20 years. I recently bought an 18.5" barrel for it, but I really prefer the wood stock and forearm.

                That being said, the original stock has a crack in it as does the forearm grip. I was looking at synthetic options, but have decided to look for a nice used wood stock and a "corncob" forearm as formerly seen racked in the front seat of CHP cruisers.
                Just taking up space in (what is no longer) the second-worst small town in California.

                Comment

                • #9
                  MaHoTex
                  Calguns Addict
                  • Jul 2010
                  • 5002

                  Dutch... That sounds really nice... Shotguns are supposed to have wood furniture...
                  NRA Life Member

                  sigpic

                  Mr. President, I can't take any more winning! Make it stop Mr. President. The winning is YUGGEEEE!

                  "If you've got a problem with the US, you better make sure it's not a military problem." SSgt Leslie Edwards

                  Comment

                  • #10
                    SpectreZ91
                    Member
                    • Apr 2011
                    • 160

                    I'll keep an open mind and see where it leads. I just wanted a pistol grip with a stock. I decided to go this route because this stock is adjustable so I can adjust it to fit me. I got it for just a few dollars more then the pistol grip/fixed stock combinations around here. The other stuff was just "extras" I do plan to keep my original stuff for the "just in case".

                    I like the pistol grip/stock combo. I used a buddies Mossberg 500 (short barrel) who had a pistol grip/stock setup when I was shooting clays. I hit more that day with his setup then I have with mine.

                    I appreciate the info.. We'll see how it pans out.. I could always buy a bipod for it. lol

                    Comment

                    • #11
                      MaHoTex
                      Calguns Addict
                      • Jul 2010
                      • 5002

                      Another thought... You could also get some rail covers so it does not tear your hand apart.
                      NRA Life Member

                      sigpic

                      Mr. President, I can't take any more winning! Make it stop Mr. President. The winning is YUGGEEEE!

                      "If you've got a problem with the US, you better make sure it's not a military problem." SSgt Leslie Edwards

                      Comment

                      • #12
                        SpectreZ91
                        Member
                        • Apr 2011
                        • 160

                        I'm hoping the kit comes in today so I can see how it looks/works.. Will find out if the UPS guy deliverd it to the store or not..

                        Comment

                        • #13
                          Rob454
                          CGN/CGSSA Contributor - Lifetime
                          CGN Contributor - Lifetime
                          • Feb 2006
                          • 11254

                          You can get used to the safety its not that big a deal. I just have a plane Jane 500 8 shot defender i bought a billion years ago. Works great.

                          Comment

                          • #14
                            bjl333
                            C3 Contributor
                            CGN Contributor - Lifetime
                            • Dec 2009
                            • 7010

                            Wood stock, 18.5 bbl, heat shield. Thats how mine rolls!!

                            Originally posted by Rob454
                            You can get used to the safety its not that big a deal. I just have a plane Jane 500 8 shot defender i bought a billion years ago. Works great.
                            Geez Rob, You looked a little younger in the clinic!!
                            Wanna learn to shoot SKEET? I am here to introduce all shooters to the sport of SKEET Shooting ....
                            CLICK HERE TO FIND OUT >>> SoCal Skeet Clinic
                            SKEET SHOOTING CLINIC
                            sigpic

                            Comment

                            • #15
                              beretta929mm
                              Senior Member
                              • Oct 2009
                              • 1492

                              I personally can never get used to a pistol grip on a shotgun. With a pistol grip, all the pounding is transfered to one's wrist rather than the forearm and shoulder. Fire 50 rounds in a row, and you will know what I mean. Anyway, nice purchase.

                              Comment

                              Working...
                              UA-8071174-1