Modding an 1100 trigger group

[crackerman]

How hard would it be to change the latch on a 1100 bolt, and the loading gate to the competition tactical one with the full length bolt release button?

[bjl333]

That was the mod I wanted to do to my 1100. Where are you located? I can check in Socal and Norcal for ya.

[randy]

If you have to spend money to get the parts you might want to look at DMW ez loader. If you shoot a Remmy in competition you have one of these on your gun. Or just about everybody does.

DMW is in Covina if you don't want to install it yourself.

[kmca]

How hard would it be to change the latch on a 1100 bolt, and the loading gate to the competition tactical one with the full length bolt release button?

If you're talking about the bolt handle, it's a "plug and play" part. The loading gate may take a little longer. When I fit mine, a little filing was required, nothing very difficult.

[aippi]

Not hard at all. On my web site there is a How to Video "Carier Dog follower spring".

Changing the carrier on a Remington 1100 or 11-87 involves removing the carrier like in the video, except you have to hold your finger over the carrier latch so the spring and plunger don't fly out. Same proceedure just be carefull not to let that stuff fly off as it is hard to find in a crowed shop.

The blot hand snaps out and you have to know how to do this to clean your weapon. the new one snaps right in.

The Remington 12 ga competion Master tactical carrier is only $31.00 and is part number F300902 and requires no modifications as it is the same one that comes on the 11-87 Police. You get one from Remington or shoot me a PM and I can tell you where to get one and even get it installed if you are not comfortable doing it.