the only guns I have test fired with max dram loads, at the shop (when Im up there) that have failed to cycle slugs straight off had one or no gas ports visible.
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Saiga 12 not working, need help?
Collapse
X
-
Yeah, send it into Cadiz. They took care of my single-port, "vodka special" and returned it in under a month (I think closer to three weeks.) Your gun should definitely be at least extracting those shells.------------------------------------------------------------
iTrader protip: When I buy something from you and I immediately pay, then my part is done. That's all I have to do. You can leave me iTrader feedback and go on with your life. When I get the item, I will leave you iTrader feedback, assuming you've already done your part. See how that works?Comment
-
I can run most walmart ammo birdshot fine on the looser gas setting. Got even better after 200 rounds of breaking in.For Sale!!
Glock 44 .22lrComment
-
the last batch of imports had a disproportionate number of gas port issues
apparently they under drilled a large number of them and did not catch it in QC.
It is completely fixable.Comment
-
Actually, what the official story is.....after the Swiss came to the factory early last year, and reworked the Russian tooling to make a better production line, and work out some other issues with production, APPARANTLY when they started back up and were pulling parts bins, some military contract barrels (two holes) got mixed into the bunch. It makes one wonder what the hell they are using in the Russian military for ammunition that would have that little gas passed into the gas system, even with the blow-by vent in the left side of the gas block venting the excess out.
There are a host of other minor issues that we are seeing currently. Giving it some thought, and compared to how tight the older guns were put together (its nearly impossible to drift the factory rear sight on a number of the early guns, for instance), it makes it much easier for tooling to "adjust" said part when its pressed on, or the assembly is moved to the next tool to drill and press the set pins (gas blocks and front sights, namely), so some errors come around. As small arms production falls under state secret territory, you wont get any official answer, and those that you do get, have to be taken with a grain of salt. Thats just how it works.
Tom has been documenting every new issue in duplicate pictorially and that is what is being sent back to Russia from RAAC with the bill, so that they can SEE what the problems are that we are running across. Hopefully, he and Vicki can get their EXIT visas in order for Mr K's birthday this November, and he can get certified at the factory as an official armorer. Yes, he has been officially invited to do just this.
Also, one should remember, that work over there is hard to come by, if at all. If you shut down a production line because you broke a bit and dont have the right one there to stick back in the tool, you arent gonna be there long. So "this one is close enough" issues have come through, we suspect, as well.
the various issues do not go by serial #, but rather production batch #. For instance, a large number (but not all) of the 500 lot had two gas ports. The production run is the XXX/XXX number on the side of your box. the SECOND number in that set is the batch number. It is NOT the rule, keep in mind, just a heads up to inspect certain guns a little closer. XXX/500 and XXX/338 seem to be the most frequent with two port guns, but there are some other lot numbers that pop up once in a while as well.
Again - we estimate that about 1-2% of total imported saiga-12's may have issues. The two gas port run really was the main factor in recent issues that you have all heard about or had. It has also been suggested to the factory to open the hole in the gas block itself up a little bigger, to help with the covered ports issues that we see here and there.
Hope this helps. Note my signature line. This is information that I CAN release to the public, straight from the horse's mouth.Last edited by BVamp; 07-23-2009, 2:44 PM.Rockin the Saiga world since 2003Comment
-
DO you have pictures of the gas holes it will better describe to the guys that dont know where they are located
Actually, what the official story is.....after the Swiss came to the factory early last year, and reworked the Russian tooling to make a better production line, and work out some other issues with production, APPARANTLY when they started back up and were pulling parts bins, some military contract barrels (two holes) got mixed into the bunch. It makes one wonder what the hell they are using in the Russian military for ammunition that would have that little gas passed into the gas system, even with the blow-by vent in the left side of the gas block venting the excess out.
There are a host of other minor issues that we are seeing currently. Giving it some thought, and compared to how tight the older guns were put together (its nearly impossible to drift the factory rear sight on a number of the early guns, for instance), it makes it much easier for tooling to "adjust" said part when its pressed on, or the assembly is moved to the next tool to drill and press the set pins (gas blocks and front sights, namely), so some errors come around. As small arms production falls under state secret territory, you wont get any official answer, and those that you do get, have to be taken with a grain of salt. Thats just how it works.
Tom has been documenting every new issue in duplicate pictorially and that is what is being sent back to Russia from RAAC with the bill, so that they can SEE what the problems are that we are running across. Hopefully, he and Vicki can get their EXIT visas in order for Mr K's birthday this November, and he can get certified at the factory as an official armorer. Yes, he has been officially invited to do just this.
Also, one should remember, that work over there is hard to come by, if at all. If you shut down a production line because you broke a bit and dont have the right one there to stick back in the tool, you arent gonna be there long. So "this one is close enough" issues have come through, we suspect, as well.
the various issues do not go by serial #, but rather production batch #. For instance, a large number (but not all) of the 500 lot had two gas ports. The production run is the XXX/XXX number on the side of your box. the SECOND number in that set is the batch number. It is NOT the rule, keep in mind, just a heads up to inspect certain guns a little closer. XXX/500 and XXX/338 seem to be the most frequent with two port guns, but there are some other lot numbers that pop up once in a while as well.
Again - we estimate that about 1-2% of total imported saiga-12's may have issues. The two gas port run really was the main factor in recent issues that you have all heard about or had. It has also been suggested to the factory to open the hole in the gas block itself up a little bigger, to help with the covered ports issues that we see here and there.
Hope this helps. Note my signature line. This is information that I CAN release to the public, straight from the horse's mouth.Comment
-
i sent mine in to cadiz a few weeks ago supermario....one of my holes weren't drilled all the way through and i was having trouble with light loads. . . you should have been cycling slugs no problem. what brand ammo were you using? i might have missed thatsigpicComment
Calguns.net Statistics
Collapse
Topics: 1,870,871
Posts: 25,176,881
Members: 358,862
Active Members: 5,398
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 31317 users online. 127 members and 31190 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment