12GA From Hell in a break action--

[hubel458]

Some more testing with RE17 powder. I used it in 2.75",
3", 3.5" 12ga plastic, 3.5 and 3.85" brass. I like it the
best of all, as well as the real slow powders in our
long case with BMG primer.
Following tested in Savage-max pressure 35k psi.
I took couple of our first made 3.85" BMG based
long cases and bushed them back to use shotgun primers
to fire off the RE17. Works great, with 715gr jacketed slug
and 220 gr RE17 getting 2700 . With 420 gr slug in
BPI sabot with 250 gr RE17 getting 3200 plus.
Following tested in NEF-max pressure 25k psi.
Using 3.5" MRC brass, 715gr jkt and 200gr RE17, got 2500.
420 gr in BPI sabot and 220 gr Re17, got 2900 fps.
And we get real good velocities in plastic with half the
basecup expansion of factory mag loads.So that solves
problem-IE, being able to use regular firing mechanisms and
shotgun primers, with large enough powder charges to
get hairy velocities at mag shotgun pressures in plastic
and higher in brass cases with heavy barrels.A good powder
for plastic and brass loads.
I see now that Lightfield Co has the Commander 3.5" Plus
slug loads with 600gr at 1900, probably in a test barrel.
But that is great- nice as it seems we're being copied!!!ED

[hubel458]

So many guys want 12ga sabot type slugs to reload their own.
Here is an interesting combination slug available in Europe
and they are working to get distributors/stores here.
Any interested stores and shops contact them. We need
many sources of saboted slugs for reloading. The sabot
petals discards completely as slug exits muzzle and locked
on base stays with slug, making it nose heavy so it will give
decent accuracy in smooth bores.Will work in rifled barrels
also. Slug is .629" diameter, comes in 570gr, 700gr, 970gr
weights. They're selling these reloader/other loaders only.
It is called the US-S slug, and their site is
europeancartridgeunlimited.com ..Ed

[Super Spy]

I love Overkill.........

[hubel458]

The company kindly gave me few US-S slugs to test at high speeds.
I had helped him test another slug a while back.
He sent me some each of the US-S 570 gr, 700 gr, 970 gr.
I tested the 570 gr so far and in 3.5" plastic case in the 1887
smoothbore 35" barrel and in the NEF rifled 36" barrel at
1900 fps. I got that with 130gr of RE17 with one BPGS
seal under the sabot on the slug. The bottom of the sabot seal
is exactly like a BPGS, so a BPGS added gives double sealing.
Both smooth and rifled gave 3 shot 3" group each at 50 yds with
peep sights and bad eyes. This slug does as good as advertized
in smooth barrels, and smooth accuracy is as good as rifled.
My smooth barrel is tight, measuring 723" at muzzle.
These should be a great deer and hog slug. Folks need to get
after their dealers to work to import these for them
to have what seems a good slug to reload...

On another note we may have found a guy who is gearing up
to make 10 ga rifled barrels. I'll know later this winter
If so I will put one on a bolt action and use the 4.1" long
10GA FH case I made or get some like it from RMC..Ed

[hubel458]

Here is picture of the US-S slugs in a lineup
with other 12ga slugs I'm testing. Lefteris was
kind enough to send me a few of each weight
to test. They are the 3 in second row on the right.
They are 570gr, 700 gr, 970 gr. I tested 570gr in
3.5" plastic so far. At 1900 in the NEF rifled, and
in the 1887 smooth barrel, got 3" group on both.
With peep sights an bad eyes.So the US-S slug
is great in smoothbores, as good as rifled. My
smoothbore on the 1887 is .723" bore at muzzle,
a nice tight fit for smooth slugs. The smooth
bores Lefteris tested them with are .722" muzzle,
and they've already killed 5 wild boars, one shot
kills with the 570gr slug. Also if anyone wants a
heavy smoothbore new 12ga barrel, .722" muzzle,
1.375" outside diameter to make a great slug
gun with slugs like these, and others like the
Brenekkes, I have spare one. The US-S slugs
are smoothbore accurate in my 87 like the
Brenekke KOs.In the picture the left two cases
are 3.5" Fiocchi with the Fiocchi magnum primers.
I compared that primer to the REM 209 primer and
it has about the same strength.Next two are FED 3.5".
then 2 12GA FH 3.85" cases, then 3.5" RMC brass, then
3" RMC brass, the 2 WIN 3.5", then 2 REM 3.5".ED

[hubel458]

I got the 700H 3.25 case feeding from the magazine I set
up on the Montana Rifle Co PH action. It is singlestack with
feed lips similiar to 12ga shotgun clip style magazines I
had here. Works great, shown in first picture. Now it is longer
than regular 12ga mags, but same setup would do for feeding
long brass 12GA FH and long MRC 12ga cases. The
700H 3.25 is 3.9 inches overall loaded length. In picture
case is ready to clear the mag lips, then rim pops up under
extracter as bolt is moving forward. Second picture is
the box used that I made out of two PH boxes. That allowed
for extra height and fit for singlestack and riveted together.
Used a Savage 210 12ga follower and spring. ED

[hubel458]

The 700gr US-S slug in smoothbore, at 2000
in a 3.5" brass case, got a 2.5" 3 shot group
at 50 yds. Great slugs they have come up with
for smoothbores.
Some of us talking about getting 10 ga rifled
barrels made, here is a picture of my 4.1" long
brass 10ga I made from 50cal Russian by putting
on a rim like the 12GA FH is built.Just a prototype,
third in picture. Later I'll get RMC to make some,
as it is much easier way. First in picture is
16GA FH 3.5" long, 2nd 12GA FH 3.85" long,
3rd 10GA FH 3.1" long, 4th 8GA FH 4.3" long.Ed

[hubel458]

Here is picture of the 12ga belted cases I made to
test a few loads in. I made it from 55cal belted
Boys case. I reduced belt diameter a little and left
the base the same, which is 12ga size.In picture
first is 55cal, second expanded to .620", third
expanded to .660"(16ga), then two 12 ga ones.
Next is our 12GA FH, and then a 12ga 3.5"
plastic case.A little work in long 12ga FH chamber
with a tool for belt step and it chambers. Ed

[slappomatt]

has anyone ever told you that your insane? rock on my friend!

[hubel458]

Here is a picture of US-S brass slug after going through
3 foot of wood slabs in a bundle. It has shed its plastic
base and it went through straight without tumbling.
This one is 570 gr fired at 2200 in RMC case, from NEF.
Also in picture is one with white sabot petals off, as it
would be in flight, before hitting target.Ed

[WeekendWarrior]

WWRTW

[hubel458]

No videos of this particular slug, We have videos
of other one listed earlier in thread.

4bore work. Working on design of firing pin,
and waiting for parts now. Problem is getting
real small parts without CNC for bushed
firing pin with rebound spring. But it takes
time.

We will have swaged lead slugs
in a little while as my barrel is smooth. They
will be 1600gr hollowbase, when done,
a hundred of them at least.
Got wads and cards, shown in the picture with 4bore
cases and slugs. And my 2bore case for comparison
Also 12ga wads for comparison..Ed

[hubel458]

Our cartridge work and experimenting got a nice
write up in # 470 Nov/Dec International Ammunition
Journal. Page 10-11 by Zach Weighman, a
cartridge collector and gun nut friend.

Got a guy just figured out BMG case rim, and for a rim
puts on 12ga high base cup from a plastic case. He turns
base/rim of bmg case about .008" and use JB Kwik to hold
it on. Pushes it on with press. He removes base cup with
heat gun from plastic cases,

He is using RE17, so shotgun primers will work, and he
puts bushing in case for primer. Has bushing reamed so
the primer pocket protrusion on the base cup goes up inside
tight, as he pushes on the base cup. It'll fire ok and to size it
do like I do, I push case into open top die, and push it
back out from the top with a rod and hammer. That
way the rim don't get bent up. He says it saves a lot of
time not having to make rim pieces.

We will have more info and pictures next few weeks.Ed

[hubel458]

Here is a picture of a BPI sabot with a BPI Flexseal I
use on to it in place of the original cushion seal.
I also cut shallow slots in the outside at the bottom
of the petals. Sabot opens much quicker and seems
along with BPGS seals under it to work ok without
damage, giving high velocities. In pic on left is regular
BPI sabot, behind is one I put a cushion on from a
Brenekke KO slug, and in front the one with Flexseal on.
The slug in it is one a guy casts at 440 gr and .504"
diameter, and works ok.

New info on my 499HE, from now on we will make cases
out of 450 #2 brass, as Jamisons has 3-4000 cases,
and it seems no one has the 475 #2 we used first.
Only slight case dimension change is the base .012"
smaller, all else is the same. I'm getting reamers redone
and will be able to use in couple weeks. Case will still have
plenty of taper to extract easy in singles, doubles,
falling blocks.etc.

And speaking of falling blocks I found one, and put my 585HE
in it, and it is big enough and has enough clearance to be used
for a 577NE, 600NE, long 20ga, my long 16ga FH,
the 700H, the 700HE. Cost no more than Ruger. Will have pics
and info soon. Ed

[hubel458]

Here is picture, Falling Block I found that I put
my 585HE in. It didn't need any work on the
feed trough to feed. 585 case shown in it.
In fact the trough is big enough
and the action big enough for 600NE, 3.5" 20ga
brass, 3.5" 16ga FH brass, my 700 HE long case.
I reworked a NEF stock to it, as I'm not
a stockmaker.Nice action.2nd picture is
of the 16GA FH in the feed trough.Ed