Unconfigured Ad Widget

Collapse

Question on a R870 Express shotgun. Can barrel size be changed and replaced?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    artb
    CGN/CGSSA Contributor
    • Feb 2014
    • 1552

    Originally posted by Skidmark
    Such a smart and simple firearm!
    Yessir! ...

    Comment

    • #17
      XVIga_Rob
      Senior Member
      • May 2012
      • 2354

      The 870 Tactical 7-Round, is the model that you can not swap barrels on.

      Comment

      • #18
        artb
        CGN/CGSSA Contributor
        • Feb 2014
        • 1552

        Wow.
        It is very simple for me.
        I believe I had previously changed the loading tube.


        Sent from my VS987 using Tapatalk

        Comment

        • #19
          XVIga_Rob
          Senior Member
          • May 2012
          • 2354

          Although the magazine tube can be changed in the receiver. It's not a simple change, and not recommended.

          Barrels can easily be swapped on 870's with a standard length magazine tube, or one with a screw on extension, as the barrel rings are attached to the same spot on the barrels. The barrel ring for the factory 7-round, is attached to a different spot (closer to the muzzle) on the barrel.

          Comment

          • #20
            artb
            CGN/CGSSA Contributor
            • Feb 2014
            • 1552

            Originally posted by XVIga_Rob
            Although the magazine tube can be changed in the receiver. It's not a simple change, and not recommended.

            Barrels can easily be swapped on 870's with a standard length magazine tube, or one with a screw on extension, as the barrel rings are attached to the same spot on the barrels. The barrel ring for the factory 7-round, is attached to a different spot (closer to the muzzle) on the barrel.
            Maybe the 870 tactical has changed over the years.
            I first swapped barrels 6 or 7 years ago.
            It is the same 870 tactical as your pic.
            It has the 28" barrel installed on it right now.
            What you are saying is not correct for my Remington 870.

            Edit:
            Here is the text from the email from CTD dated 6/24/2007 (they were good back then)

            Item # 96225
            Rem 870 12 Ga Special Purpose Barrel, Vent Rib, 28", Rem Choke, Matte Blue Quantity : 1 Price : $183.77


            Thank you for your order!
            Cheaper Than Dirt staff
            Last edited by artb; 04-22-2017, 3:09 PM.

            Comment

            • #21
              mase1b
              Member
              • Nov 2011
              • 134

              What XVIga_Rob is saying is that in the pic above, that one particular Tactical express model uses a one-peice, 7 round magazine tube. As such, the ring that attaches the barrel to the mag tube is much farther away from the receiver than all other models, making the barrels incompatible. See the difference?





              That's great if all you want is a HD/Tactical SG that ready to go out of the box (no need to buy extended mags etc...But it's bad if you want to play with different configurations. I believe that Rem only started making these in the last few years. Nothing wrong with it per se, just not gonna be a good hunting SG. It's a machete, not a Swiss Army Knife lol

              But to Aippi and artb's points 99% of 870s can swap barrels in about 10 seconds.

              Comment

              • #22
                artb
                CGN/CGSSA Contributor
                • Feb 2014
                • 1552

                Originally posted by artb
                Maybe the 870 tactical has changed over the years.
                I first swapped barrels 6 or 7 years ago.
                It is the same 870 tactical as your pic.
                It has the 28" barrel installed on it right now.
                What you are saying is not correct for my Remington 870.

                Edit:
                Here is the text from the email from CTD dated 6/24/2007 (they were good back then)

                Item # 96225
                Rem 870 12 Ga Special Purpose Barrel, Vent Rib, 28", Rem Choke, Matte Blue Quantity : 1 Price : $183.77


                Thank you for your order!
                Cheaper Than Dirt staff
                Originally posted by mase1b
                What XVIga_Rob is saying is that in the pic above, that one particular Tactical express model uses a one-peice, 7 round magazine tube. As such, the ring that attaches the barrel to the mag tube is much farther away from the receiver than all other models, making the barrels incompatible. See the difference?





                That's great if all you want is a HD/Tactical SG that ready to go out of the box (no need to buy extended mags etc...But it's bad if you want to play with different configurations. I believe that Rem only started making these in the last few years. Nothing wrong with it per se, just not gonna be a good hunting SG. It's a machete, not a Swiss Army Knife lol

                But to Aippi and artb's points 99% of 870s can swap barrels in about 10 seconds.
                Ok. I believe XVIga_Rob is referring to a different model than mine.
                I mistakenly thought he was challenging my ability to swap barrels. ...

                Thanks for the clarification, mase1b ...

                Comment

                • #23
                  XVIga_Rob
                  Senior Member
                  • May 2012
                  • 2354

                  Originally posted by artb
                  Ok. I believe XVIga_Rob is referring to a different model than mine.
                  I mistakenly thought he was challenging my ability to swap barrels. ...

                  Thanks for the clarification, mase1b ...
                  Thanks for the additional pic & clarification mase1b.
                  Not at all artb.
                  Changing the mag tube is far beyond anything a normal user should need to do.
                  The factory 7-round tactical is a great gun, just kind of dedicated. I changed the pad on mine and like it alot! It's not my only shotgun....or 870, but I never have to think about what configuration it's in.

                  Comment

                  • #24
                    skeet25
                    Junior Member
                    • Feb 2011
                    • 96

                    Originally posted by aippi
                    Remington makes no such spacer and does not recommend using one.
                    Perhaps you can call Remington at 800-243-9700, option 4, 2, 2 for the parts department and check on item # F402819. It goes for $22.39 + shipping + tax
                    Last edited by skeet25; 04-29-2017, 1:45 AM.

                    Comment

                    Working...
                    UA-8071174-1