Been trying to make some simple home made reaction targets, (for the young guys I take shooting), that aren't a fire hazard or don't involve chemicals etc---I came across this vid and it seemed perfect except that I couldn't get it to work.
I can't get this to work---I made mine exactly like in the vid but it doesn't work for me?, (tried at least 6 different ways)---Cap and valve stem are air tight, no air leaking---I pump up with bicycle pump to 65-70psi, (he says he only did 50psi)---Go about 15/20 yards away and shoot with .22 rifle using high velocity ammo---It does nothing---The bullet just goes right through and bottle just sits there---No noise, nothing just a clean hole in one side and out the other---Would really like to get this to work---Any ideas.
Happy
I can't get this to work---I made mine exactly like in the vid but it doesn't work for me?, (tried at least 6 different ways)---Cap and valve stem are air tight, no air leaking---I pump up with bicycle pump to 65-70psi, (he says he only did 50psi)---Go about 15/20 yards away and shoot with .22 rifle using high velocity ammo---It does nothing---The bullet just goes right through and bottle just sits there---No noise, nothing just a clean hole in one side and out the other---Would really like to get this to work---Any ideas.
Happy

Comment