BX-25 function in 10/22?

[2761377]

Why do people feel the need to say things like this?

on the off chance the OP is a DOJ troll. there is zero operational security on this site.

[majtom94]

on the off chance the OP is a DOJ troll. there is zero operational security on this site.

Thankfully there is time and space which is a missing factor in all the statements. Experience from a time before insanity hit the legislature.

[Remus]

These are legal rebuilds we are talking about here. I don't know if the barrel is considered match grade or not? It is a carbon fiber volquartsen 22lr 16". I have tried a lot of different kinds of ammo through them, from cheap bulk to cci stingers, from hollow point to full nose jacket to lead. Everything I have tried through the stock 10 round mags run great.

From the VQ website the carbon fiber tensioned barrels have match chambers - the tightest chamber available for 22LR. Any evidence of the magazine hitting the bolt when it closes? Does it feed okay, if you chamber and eject several rounds any evidence of the bullet being scraped on the feed ramp?

[peplow530]

From the VQ website the carbon fiber tensioned barrels have match chambers - the tightest chamber available for 22LR. Any evidence of the magazine hitting the bolt when it closes? Does it feed okay, if you chamber and eject several rounds any evidence of the bullet being scraped on the feed ramp?

It feels ok when I cycle the bolt manually. Next time I take it out I will have to check the casings for certain marks.

check the feed ramp on the forward part of the little cast lip part. I had one that was a little rough and polished it up with the dremel, happy mag now. Also had to file down a casting line on the right inside, only by a few thousands.

I also thought about trying this, but I figured I'd ask first.

Thanks for the help