Unconfigured Ad Widget

Collapse

Ruger Mark III Ftf Issues HELP

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    Chaos47
    Calguns Addict
    • Apr 2010
    • 6615

    OP says he installed a MK2 Volquartsen Trigger kit, that would have already removed his Magazine Disconnect unless he did it wrong and installed those parts back in. No need for a MD removing bushing if he has the MK2 bushing and trigger parts to go with it.

    Removing the LCI helps with Failures to Feed.
    The OP is claiming Failures to Fire.

    But yea I remove the internals of the MK3's LCI, you don't need a metal replacement filler block. You can run it without the LCI altogether or what I do is remove the internals (metal part and spring) and use just the plastic factory filler.

    Not my Photo:
    Last edited by Chaos47; 06-29-2013, 3:32 PM.

    Comment

    • #17
      rogervzv
      Senior Member
      • Feb 2011
      • 2087

      Originally posted by problemchild
      And I can show you 100 posts at rfc that says it DOES get in the way.
      Huge exaggeration. I am over at RFC all the time. Just not so.
      Come and Take It!
      I'm the only hell my momma ever raised ...

      Comment

      • #18
        problemchild
        Banned
        • Oct 2005
        • 6959

        Originally posted by rogervzv
        Huge exaggeration. I am over at RFC all the time. Just not so.
        So am I, reading. Huge failure on your part to say the crappy parts from ruger are not the issue.

        Since you are the "expert". Tell him how to make it work with ALL the stock parts. Bet you cant!

        The mag disconnect IS causing his problem. Once he removes it and uses the correct hammer/bushing it will solve the issue.

        I bought a brand new fluted mk3 hunter and it had the exact same issues he is having.

        The trigger was HORRIBLE and you could feel all the parts clanking around and rubbing.
        The gun failed to feed/eject
        The firing pin would not strike the rim hard enough.
        The gun would fail to shoot/allow the trigger to be pulled with a loaded chamber.

        ALL of the above issues were solved by removing the crappy ANTI-GUN/TREE-HUGGER factory parts.
        Last edited by problemchild; 06-30-2013, 4:04 PM.

        Comment

        • #19
          rogervzv
          Senior Member
          • Feb 2011
          • 2087

          Wow, a "huge failure" ... who knew. LOL.
          The guy replaced all of the parts we are discussing and the gun runs very poorly, and you are blaming the removed parts for his problems. Pretty amazing logic.

          Again, I own 3 Mark IIIs, they are all stock, and they all shoot 100% reliably. And it is not so that over at RFC they are having a riot about the LCIs causing failures. Fantasy.

          These guns run quite good right out of the box. Nothing wrong with customizing them, of course, but it is not necessary if your goal is to have a reliable, good shooting gun.
          Come and Take It!
          I'm the only hell my momma ever raised ...

          Comment

          • #20
            nor_cal_ryan
            Member
            • Jun 2010
            • 379

            Removed all volquartsen aftermarket parts besides the trigger (silver would look weird with a black barrel and od receiver), and the bushing. Also removed the loaded chamber indicator completely. Trying it out this weekend. Knock on wood, on FTF's!!!!!

            Comment

            • #21
              Chaos47
              Calguns Addict
              • Apr 2010
              • 6615

              Good luck.
              Did you remove the Majestic Speed Strip kit too?
              IMO thats part of your problem.
              As long as you don't have the trigger over adjusted it should work.

              IMO if it works I would slowly add parts back.

              Personally I would use: (If I already had the Volquartsen Trigger kit)
              Volquartsen Trigger
              Volquartsen Sear
              Volquartsen Plunger
              Ruger Hammer (Would need an MK3 Magazine Disconnect Bushing)
              Ruger Springs

              Not use:
              Volquartsen Hammer
              Volquartsen Springs
              All of the Majestic Speed Strip kit

              Comment

              • #22
                Jester3
                Senior Member
                • Nov 2012
                • 1132

                Hey norcalryan, good luck at the range after removing your mods.
                Like others here, I have the Mark III, stock out of the box. Have run hundreds of rounds from different manufacturers ammo thru it and NEVER had a problem firing or ejecting.
                They're a bit more work than other handguns to strip down and clean, but it gets easier after she's been taken down a few times.
                Again, good luck as this is a awesome handgun! Easy for the wife to hijack from me as she LOVES this thing.

                Comment

                • #23
                  MyOdessa
                  Ban Islam
                  CGN Contributor - Lifetime
                  • Mar 2011
                  • 2643

                  With failure to fire, examine brass for light strikes. I would check firing pin for proper dimensions, also firing pin spring and channel for obstructions. Look if hammer binds and look at mainspring too.

                  Comment

                  • #24
                    nor_cal_ryan
                    Member
                    • Jun 2010
                    • 379

                    I do have the speed kit. I will have to look for light strikes. I'll report back this weekend. Again all the help is hugely appreciated.
                    Ryan

                    Comment

                    • #25
                      rogervzv
                      Senior Member
                      • Feb 2011
                      • 2087

                      For goodness' sake, put the gun back 100% stock and give it a chance. You have so much stuff hung on the gun, and swapped out, that there is no hope of finding out which of that stuff is causing your problem. Really, these guns are great if you mostly just leave them alone. You don't need all that stuff.
                      Come and Take It!
                      I'm the only hell my momma ever raised ...

                      Comment

                      • #26
                        nor_cal_ryan
                        Member
                        • Jun 2010
                        • 379

                        Rogervzv, I appreciate your help and input. I am glad you have a wealth of knowledge on these guns since you have such a history with them. I am slowly putting the gun back to stock. I see no harm in slowly removing upgrades to see if the reliability improves. If the reliability does not improve with the changes I have currently made, it is no hassle to add the remaining stock parts to the equation. If I have to put the gun back to 100% stock configuration and the problem persists you are right, something is majorly wrong and it would be time for Ruger or a qualified gunsmith to diagnose the issue. Again thank you for your advice.

                        Comment

                        • #27
                          rogervzv
                          Senior Member
                          • Feb 2011
                          • 2087

                          Originally posted by nor_cal_ryan
                          Rogervzv, I appreciate your help and input. I am glad you have a wealth of knowledge on these guns since you have such a history with them. I am slowly putting the gun back to stock. I see no harm in slowly removing upgrades to see if the reliability improves. If the reliability does not improve with the changes I have currently made, it is no hassle to add the remaining stock parts to the equation. If I have to put the gun back to 100% stock configuration and the problem persists you are right, something is majorly wrong and it would be time for Ruger or a qualified gunsmith to diagnose the issue. Again thank you for your advice.
                          Hey, you are correct; removing the upgrades one at a time may be as fast or faster a way to find the problem than going all the way back to scratch and then adding back the goodies one at a time. Either way should work. Good luck and let us know what you find. My "wealth of knowledge" is pretty much confined to stock Mark pistols; I have not messed with the fancy extractors and other enhancements. But I am the first to agree that enhancing a firearm can be one of the very fun things about the hobby so enjoy.
                          Come and Take It!
                          I'm the only hell my momma ever raised ...

                          Comment

                          • #28
                            oddball
                            Veteran Member
                            • Sep 2008
                            • 3387

                            I bought a brand new Mark III Competition late last year and out of the box, it shot like S***. Jams. Took it apart, cleaned and lubed it, and it still shot like s***. Mind you, I was feeding CCI Mini Mags, not too shabby ammo. Took it apart again, cleaned up some of the burrs on the bolt and other surfaces, and it still shot like s***. We are now on several hundreds of rounds.

                            I then visited RFC, got some advice and replaced the extractor with a VQ Exact Edge, and also took out the liberal wet-dream Loaded Chamber Indicator. BINGO, instantly no more s***. Then I decided to eliminate the super-annoying mag disconnect with the Sam bushing set-up and voila, even better. Then I replaced the trigger with a VQ set-up and it shoots even better. Now i have a great Mark II.

                            Sorry folks, Ruger has lowered their QC standards in recent years. If you won't admit this, you are wearing blinders. Sometimes, it takes some tweaking to get what you want from a certain platform, whether it is a 10/22 or a Mark III.

                            After my mods, after over 1000 rds, no jams or hiccups whatsoever.
                            _______________


                            "You may all go to Hell, and I will go to Texas" - Davy Crockett

                            Comment

                            • #29
                              MongooseV8
                              Veteran Member
                              • Apr 2010
                              • 4426

                              Originally posted by oddball
                              I bought a brand new Mark III Competition late last year and out of the box, it shot like S***. Jams. Took it apart, cleaned and lubed it, and it still shot like s***. Mind you, I was feeding CCI Mini Mags, not too shabby ammo. Took it apart again, cleaned up some of the burrs on the bolt and other surfaces, and it still shot like s***. We are now on several hundreds of rounds.

                              I then visited RFC, got some advice and replaced the extractor with a VQ Exact Edge, and also took out the liberal wet-dream Loaded Chamber Indicator. BINGO, instantly no more s***. Then I decided to eliminate the super-annoying mag disconnect with the Sam bushing set-up and voila, even better. Then I replaced the trigger with a VQ set-up and it shoots even better. Now i have a great Mark II.

                              Sorry folks, Ruger has lowered their QC standards in recent years. If you won't admit this, you are wearing blinders. Sometimes, it takes some tweaking to get what you want from a certain platform, whether it is a 10/22 or a Mark III.

                              After my mods, after over 1000 rds, no jams or hiccups whatsoever.
                              I had a very similar experience. I swapped out the LCI and my failures were a thing of the past. Although I didnt have much of a choice since a case blew and grenaded the LCI into tiny pieces.

                              Comment

                              • #30
                                small hole shooter
                                Senior Member
                                • Mar 2013
                                • 1183

                                I waited months to find my Mark II, found one a couple of months ago. Could have bought the Mark III but did not. No FTF or FTE with any of the ammo that I feed it. My whole family likes to shoot it.

                                Comment

                                Working...
                                UA-8071174-1