Matech for .22? This is minus my calculations and tables. But should be close. Your welcome to anyone interested. Apparently if I zero my .22lr ar at 100, with a matech, I can be close to zero at 200 yards with the 600 yard setting. Not much range. I might stick with my MBUS.
Matech calibrations. 55gr m193 14.5’’ 3000fps .243 bc 200 yard zero
10mph wind
matech drop for moa
100- no setting
200- 0 moa
300- 2.9moa
400- 6.8moa
500- 11.3moa
600- 17.8moa
( i think, since there are inbetween around 450, 550, 650? on the matech each click is 3 moa elevation)
.22lr trajectory
Cci mini mag 40 gr 1245 fps, bc .138, 100 yard zero 10 mph wind
50 yard zero
100 – 5.6 moa drop
200- 21moa
100 zero drop
200- 15.1 moa drop
300- 36moa drop
Matech calibrations. 55gr m193 14.5’’ 3000fps .243 bc 200 yard zero
10mph wind
matech drop for moa
100- no setting
200- 0 moa
300- 2.9moa
400- 6.8moa
500- 11.3moa
600- 17.8moa
( i think, since there are inbetween around 450, 550, 650? on the matech each click is 3 moa elevation)
.22lr trajectory
Cci mini mag 40 gr 1245 fps, bc .138, 100 yard zero 10 mph wind
50 yard zero
100 – 5.6 moa drop
200- 21moa
100 zero drop
200- 15.1 moa drop
300- 36moa drop





I'd have to check my dope, but with a typical 50 yard zero your looking at about a 30 foot holdover. A couple MPH wind is going to move it several feed as well. I would like to see if you could do the math for that site with a 25 yard zero. Should give you a real usable, adjustable iron site for iron site appropriate ranges with a .22lr
Comment