Tweet
I just finished building my Ultimate 10-22. This project has taken me a couple of years. I bought the parts over time and work caused this project to always be on the back burner. I have compiled a list of parts, their prices, and websites where they can be purchased.
The receiver is an MOA stainless steel receiver, which sells for
$195.50. https://www.moaguns.com/rec10_22.html
The barrel is a Feddersen Stainless Steel 16.5", .920" barrel. I had to wait a long time to get this barrel because Feddersen produces stainless steel barrels infrequently. This barrel sells for $210.00 https://fjfeddersen.com/product-cate...rifle-barrels/
The barrel had to be threaded to fit the receiver, and I had Connecticut Precision Chambering do this work. This service cost $194.00. http://www.ct-precision.com/ruger10-22.html
The following parts are all made by KIDD. The bolt is stainless steel which sells for $110.00. The bolt handle, guide rod, and spring sell for $40.00. The bolt buffer sells for $6.00. The trigger is an entire single-stage unit with a long lever which sells for $273.50. The receiver pins are stainless steel which cost $7.00. The scope base is $38.50. https://www.coolguyguns.com/RIFLES_c_10.html
The stock is a Hogue OverMolded with a .920 barrel channel, which sells for $98.95.
The scope is a Leupold VX III 4.5 X 14 with an adjustable objective and Target Turrets. This sells for $400.00.
The scope rings are Leupold Mark 4, which sells for 4149.99. https://www.leupold.com/shop/mounts/series/mark-4?p=2
The scope covers are Butler Creek flip opens, which sell for $9.95. https://www.butlercreek.com/scope-co...ns/P00180.html
The sling is a GI cotton sling that sells for $15.00. After trying all kinds of slings, the GI cotton sling is the best. The sling swivels are Uncle Mike's 1-1/4" quick detachable locking, and they sell for $9.99. https://www.midwayusa.com/product/139833111610-22 (1).jpg
10-22 (2).jpg
The receiver is an MOA stainless steel receiver, which sells for
$195.50. https://www.moaguns.com/rec10_22.html
The barrel is a Feddersen Stainless Steel 16.5", .920" barrel. I had to wait a long time to get this barrel because Feddersen produces stainless steel barrels infrequently. This barrel sells for $210.00 https://fjfeddersen.com/product-cate...rifle-barrels/
The barrel had to be threaded to fit the receiver, and I had Connecticut Precision Chambering do this work. This service cost $194.00. http://www.ct-precision.com/ruger10-22.html
The following parts are all made by KIDD. The bolt is stainless steel which sells for $110.00. The bolt handle, guide rod, and spring sell for $40.00. The bolt buffer sells for $6.00. The trigger is an entire single-stage unit with a long lever which sells for $273.50. The receiver pins are stainless steel which cost $7.00. The scope base is $38.50. https://www.coolguyguns.com/RIFLES_c_10.html
The stock is a Hogue OverMolded with a .920 barrel channel, which sells for $98.95.
The scope is a Leupold VX III 4.5 X 14 with an adjustable objective and Target Turrets. This sells for $400.00.
The scope rings are Leupold Mark 4, which sells for 4149.99. https://www.leupold.com/shop/mounts/series/mark-4?p=2
The scope covers are Butler Creek flip opens, which sell for $9.95. https://www.butlercreek.com/scope-co...ns/P00180.html
The sling is a GI cotton sling that sells for $15.00. After trying all kinds of slings, the GI cotton sling is the best. The sling swivels are Uncle Mike's 1-1/4" quick detachable locking, and they sell for $9.99. https://www.midwayusa.com/product/139833111610-22 (1).jpg
10-22 (2).jpg
Comment