Unconfigured Ad Widget

Collapse

.22 AR Build

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • donw
    replied
    the dedicated Spikes ST-22 has a lower marked "22lr" and the uppers cannot be converted to centerfire.

    there is NO gas tube, and the operating arm will NOT work in centerfire upper, the bolt has no gas key, it is strictly blow-back operated.

    i have one i purchased new; it runs great. i don't think Spikes sells them any longer. but when purchased from them new, they came with a lifetime warranty.

    Leave a comment:


  • Quiet
    replied
    Originally posted by Neighbor
    What are the Guidelines to Building a Dedicated.22 Rifle?
    Under CA laws, the requirements are:

    Minimum barrel length of 16".
    Minimum overall length of 26".

    Overall length measures with the firearm in the shortest possible firing configuration (stock folded/collapsed).

    Leave a comment:


  • crufflers
    replied
    Originally posted by mshill
    Personally, I found a .22LR AR-15 (yes, I have built one with a dedicated .22LR upper) to be a huge waste of money. If you want a good shooting .22LR semi-auto buy a Ruger 10/22 or a Marlin 60 or 795, and with the difference buy 2000 rounds of ammo online.
    Or a SIG 522. Since they use the same mags as a dedicated AR-22, you might end up with both. Personally I just want one or two of everything.

    Leave a comment:


  • mshill
    replied
    There are no laws/regulations for a .22LR. Anything like "use a dedicated .22 upper" or "remove the gase block/tube" are just peoples opinions to be extra safe.

    If you have a .22 bolt installed and using .22 mags it is a rimfire rifle and not subject to AW laws, regulations, or restrictions.

    Personally, I found a .22LR AR-15 (yes, I have built one with a dedicated .22LR upper) to be a huge waste of money. If you want a good shooting .22LR semi-auto buy a Ruger 10/22 or a Marlin 60 or 795, and with the difference buy 2000 rounds of ammo online.

    Leave a comment:


  • Wheelsonly
    replied
    Jp upper can not physically put a 223 round in and if you use the ad catch .22 mag release you physically cannot install a .223 mag just buy a Nordic comp .22 upper

    Leave a comment:


  • Hdawg
    replied
    If you leave off or block the gas tube so it won't operate as a semi auto, you ban use a conversion bolt in a 5.56 barrel. Since it will only be a manually operated rifle until you put in the rimfire bolt it isn't a California "assault weapon". Or you could be like me and just use an upper that you screwed up the placement of the gas block. As long as it will not operate as a semi auto center fire it isn't an "assault weapon". This has the added benefit of not having the blowback from the gas tube come toward your face.

    Leave a comment:


  • Wheelsonly
    replied
    Here's my build

    Leave a comment:


  • alpha_romeo_XV
    replied
    There are many threads about regulations regarding rimfire rifles vs RAWs.
    Does the ST-22 have a 22LR chamber and 1/16 twist and a rimfire BCG (not a conversion kit)? If so then centerfire regulations don't apply. A lower is not a rifle. Rimfire rifle can have std mag release, pistol grip, collapsable stock, flash hider, allow friends and juveniles to shoot it. Ten round mag limit does apply. That's my understanding, as of today.

    Leave a comment:


  • mengin
    replied
    Just need a 22LR specific barrel and BCG. The rest (handguard, upper) is the same as centerfire. You will not need a gas block/tube.

    The lower is the exactly the same, but I recommend getting the Taccom pressure plug.

    Leave a comment:


  • Neighbor
    started a topic .22 AR Build

    .22 AR Build

    What are the Guidelines to Building a Dedicated.22 Rifle?

    Are they the Same as a Regular Center fire Build?

    If not can you point me in the right Direction, Can't Seem to Find recent Info on the Subject.

    I Want to use an
    ST-22 (Spikes Tac.) Upper
    Spikes Tactical Lower
Working...
UA-8071174-1