Unconfigured Ad Widget

Collapse

someplace to compare aimpoint and Eotech

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    aplinker
    I need a LIFE!!
    • Feb 2007
    • 16762

    It will absolute co-witness with that set-up (meaning that when you have the proper sight picture through your irons you'll be looking through the center of the EOTech window and the center dot will sit on the tip of the front sight post).

    I prefer a bottom third co-witness (difference here is you're looking through the bottom 1/3 of the window instead of the middle). It keeps the front sight post from obscuring the view when you're going without the rear sight up.

    Originally posted by scfast
    Will i need a riser with the EOtech using front post and a mi ers for co witness?

    Google Map of OLL Dealers

    List of CA-friendly Manufacturers, Dealers, Middlemen, and Magazine rebuild kit dealers
    Click me-->So you're a n00b and you want to build an AR? <--Click me
    This post is based on actual events. Some facts may be altered for dramatic purposes. All posts are pure opinion. All persons, living and dead, are purely coincidental, and should not be construed.

    Comment

    • #17
      scfast
      Senior Member
      • Jan 2008
      • 691

      yeah i will probably not want absolute and go for a !/3 setup so i guess ill need a riser an suggestions? regarding the 553 i was hoping to stay at about $500 or less so i may go w a 552 but i am not fond of the length but the 551's n cell battery life blows so we will see..
      sigpic

      Comment

      • #18
        aplinker
        I need a LIFE!!
        • Feb 2007
        • 16762

        I think there's a NIB one for sale in the forums. The risers would either be YHM or LaRue, with Larue absolutely being better, but it's $150 itself -- just like a good Aimpoint mount would be. I've never seen anyone say they've done it, but I don't know why a ARMS 17DR wouldn't work, too.

        Do you use NV? Cause you might be just fine with a 512 or 511 over the 55X series. That's the only difference, just like CompM vs CompML


        Originally posted by scfast
        yeah i will probably not want absolute and go for a !/3 setup so i guess ill need a riser an suggestions? regarding the 553 i was hoping to stay at about $500 or less so i may go w a 552 but i am not fond of the length but the 551's n cell battery life blows so we will see..

        Google Map of OLL Dealers

        List of CA-friendly Manufacturers, Dealers, Middlemen, and Magazine rebuild kit dealers
        Click me-->So you're a n00b and you want to build an AR? <--Click me
        This post is based on actual events. Some facts may be altered for dramatic purposes. All posts are pure opinion. All persons, living and dead, are purely coincidental, and should not be construed.

        Comment

        • #19
          scfast
          Senior Member
          • Jan 2008
          • 691

          Nv whats nv? in all seriousness no but in a shtf scenario it's nice to know its there
          sigpic

          Comment

          • #20
            grywlfbg
            Senior Member
            • Oct 2006
            • 988

            NV= nightvision If you're going to use a nightvision scope behind the EOTech it has special brightness settings.

            The EOTech 557 has a built-in riser which will give a lower 1/3 co-witness. Otherwise, LaRue makes a riser or you can get a Rock River Arms Dominator mount that is a riser and rear iron sight in one.

            Comment

            • #21
              scfast
              Senior Member
              • Jan 2008
              • 691

              Originally posted by grywlfbg
              NV= nightvision If you're going to use a nightvision scope behind the EOTech it has special brightness settings.
              Nice
              sigpic

              Comment

              Working...
              UA-8071174-1