Lets see your .223 California Legal Self Loading Rifle!

[SKULLZ0MBIE]

wow, great pic, what kind of Muzzle Break are you using? if you don't mine me asking?

[desertram800]

wow, great pic, what kind of Muzzle Break are you using? if you don't mine me asking?

looks like the DNTC?

http://www.primaryweapons.com/store/pc/viewCategories.asp?idCategory=2

[chunger]

It's a his/hers set. . . my first duracoat attempt, and the attempt was multicam - details and some process pics in "the mother of all refinishing threads" (gunsmithing section) Switched the green layer w/ pink for the wife's.

Didn't quite get the multicam feel down this time, but the next one will be spot on 1st one's always a bit iffy.

Pink rifle - 16" lightweight 1/7 twist CMMG barrel, Clark carbon fiber FF tube cut down to mid-length, EOtech, DNTC comp.

Multicam rifle - 18" CMMG SPR profile barrel 1/8 twist, JP tube, Meopta R1 1-4X illuminated K-dot on Larue SPR-E. Took some guts to duracoat that scope/mount.

Both rifles - CMMG upper receiver, Stag lower, CMT guts (staked by Denny at Global Tactical Supply), Grant's very nice U-15 stocks, 3 lb. triggers on both done on Stag lower parts kit by Bill over at ar15.com, DNTC comp. I'm going to shooting school w/ the wife next week Wanted her to have something that looked special, was lightweight and easy to use.

[Nefarious]

It's a his/hers set. . . my first duracoat attempt, and the attempt was multicam - details and some process pics in "the mother of all refinishing threads" (gunsmithing section) Switched the green layer w/ pink for the wife's.

Didn't quite get the multicam feel down this time, but the next one will be spot on 1st one's always a bit iffy.

Pink rifle - 16" lightweight 1/7 twist CMMG barrel, Clark carbon fiber FF tube cut down to mid-length, EOtech, DNTC comp.

Multicam rifle - 18" CMMG SPR profile barrel 1/8 twist, JP tube, Meopta R1 1-4X illuminated K-dot on Larue SPR-E. Took some guts to duracoat that scope/mount.

Both rifles - CMMG upper receiver, Stag lower, CMT guts (staked by Denny at Global Tactical Supply), Grant's very nice U-15 stocks, 3 lb. triggers on both done on Stag lower parts kit by Bill over at ar15.com, DNTC comp. I'm going to shooting school w/ the wife next week Wanted her to have something that looked special, was lightweight and easy to use.

Ill have to read that thread. Ive seen it, just paid no mind to it - im too scared I would mess up. THere has been alot of rattle can speak lately, and quite frankly im getting interested. I have a scuffed up lower I could toy around with... and I REALLY like the look of you setup. GREAT Job!

[Sniper3142]

You owe me a new shirt because I blew chunks on my best one!

Just kidding (sort of).



No one will be able to say those aren't... different.

[drawn]

Chunger,

I think you did a wonderful job! I especially like your wife's rifle. It warms my heart to see love shared through hard work (and I know you worked your @ss off on these) and the testicles to actually break out the pink.
Good luck on your next project and don't hesitate to lean on me for advise.

drawn

[mprahm]

Just posted my sniper rifle so here is my .223 Bushmaster with an ELCAN SPECTRE DR, Magpul etc.
[/IMG]

[mprahm]

Oh and yes its a registered A.W.

[45DAVID1]

They aren't very pretty but they are what I have.

[CRTguns]

This is my Buddy's weapon. I did the Duracoat.

[steve2071]

Didn't quite get the multicam feel down this time...

Yeah you did dude. Looks superb!

[sardaukar]

Just posted my sniper rifle so here is my .223 Bushmaster with an ELCAN SPECTRE DR, Magpul etc.
[/IMG]

I would love to have one of those Elcans, but they cost as much as a rifle.

[NSR500]

[tacticalcity]

My 2 Babies...

Two of my ARs are in there.

One is a CMMG Upper & Lower 14.7" w/ Perm. A2 Hider M-4 1:7 Twist Chrome Lined with lots of extras.

The precision upper is my take on a Navy Seal Recon Rifle and has a 16" Stainless Steel 1:8 Twist Upper and is on a Lauer Custom Weaponry lower and also has a lot of extras.

[tacticalcity]

Is that upper something you put together yourself? I've been looking for a 16-18" stainless 4 rail for awhile.

I have a nice 18 inch for sale on my website from CMMG Inc. I custom built the one you see here...if you really want a 16 inch stainless upper I'll get a quote.

http://www.tacticalcity.com/tacticalcity/sub_category.asp?CatID=1&SubCatID=2