AR Trigger Problem ?

[killshot44]

Look at the how the trigger and hammer aren't lined up in this photo.....

I'd put a different set in there; something isn't right with those. (duh)

[Cokebottle]

Look at the how the trigger and hammer aren't lined up in this photo.....

I'd put a different set in there; something isn't right with those. (duh)

Looks fine. The camera is centered on the left wall of the lower and the lens distortion makes it look like the trigger is off to the right.
Look closely at the hammer base (it's dark and hard to see)... the trigger is square.

[G38xOC]

went to rifle gear and showed that my trigger problem . after inspection , they said its either trigger or hammer .

so i purchased trigger and hammer from there . first , i installed trigger and performed function test . results were same .

2nd , after installing new hammer , problem was fixed =)

before i installed , I compares one another . and it looked same . trigger has little worn part shown . other than that , i didnt see any differences what so ever .

maybe that was the problem ? idk , but its fixed for now . but i still need to put some rounds through her to be sure

thanks all

[bohoki]

dont chuck that hammer just yet it may work for someone i think the back of the hammer needs to be file off a tad and maybe round over the front top a bit

[G38xOC]

dont chuck that hammer just yet it may work for someone i think the back of the hammer needs to be file off a tad and maybe round over the front top a bit

I'm going to call up stag arm , see what they have to say about it . hopefully they be able to ship a set for me . 30 bucks wasnt too much , but feel it was unnecessary spend . we'll see